Thanks for reaching out, Paul!
The circuit breaker that comes with the Battery Charge Line Kit for Towed Vehicles # RM-156-25 is designed to protect your 2020 Jeep Wrangler, but you'll still want to install one on the motorhome side to protect the motorhome battery bank.
We actually have the Battery Charge Line Kit for Motorhomes # RM-156-75 which is essentially the same thing you just installed, but it comes with longer spool or wire to reach the length of the motorhome.
I've attached... view full answer...
All of the base plates for your 2014 Jeep Wrangler are going to require drilling. I do recommend going with the Roadmaster # RM-521448-5 which offers the direct connect arms. I prefer Roadmaster as they test their products more than any other manufacturer which is why they are one of the only manufacturers which do not require you to use a safety cable around the base plate and to the frame on your Jeep.
The Roadmaster Nighthawk All-Terrain Tow Bar # RM-676 is our best seller with the... view full answer...
The BOLT Spare Tire Lock # BLT66FR is the Bolt part number 7032301. This will fit onto a 1/2"-20 threaded stud. I have included images for the keys which work with this lock as well as the wheel hole requirement needed to fit inside the wheel. The problem may be your 2024 Willy's Edition has some wheels which may not be compatible with the lock. view full answer...
You do not need a charge line to flat tow your 2013 Jeep Wrangler Sport. The Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor item # DM86VR is a great option for a braking system.
The only other electrical parts you will need is the wiring harness that allows you to connect to your RV and control your lights. I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267.
I have linked a couple of installation videos below so you... view full answer...
Hi Tom,
Baseplate fitment comes down to the bumper on your Wrangler, with you having a standard factory bumper the Demco # DM9518112 is going to be a compatible fit and will save you both time and money so for your situation it's a no-brainer.
For the lights I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This will give you everything you need to display your motorhome's traffic signals through the tail lights of your Wrangler. It's also going to... view full answer...
Hey Paul, the Go Power MPPT Solar Charge Controller # GP72RR can handle up to 600 watts so your 400 watt setup would easily work with this. view full answer...
Hey Paul, you actually need to go in and set the max amp hour capacity of your battery bank in the settings of the Go Power monitor part # GP44FR. If you check out page 5 and 6 of the attached install instructions link you can see how to do this. view full answer...
The answer to your question will depend on the hitch and the tire you have on your 2023 Jeep Wrangler. Some hitches like the # e98856 have a longer receiver tube to help clear the spare. If you have the factory hitch I'm not sure where it sits relative to the tire.
The closest point of the # TH83GC is 6-3/4" from the center of the hitch pin hole. Depending on how far down your tire sits it may make contact here, I can't really say without trying it on your Jeep. A little further out at... view full answer...
Tom, the Air Lift 1000 Air Helper Springs for Coil Springs # AL60829 will work with your Wrangler, but you're going to need to also use the 2" spacer # AL52420 since you have a 4" lift. view full answer...
Hey Michael, yes with the Hopkins tow bar lighting kit part # HM56202 the 4-way connector is what would go to the RV's trailer wiring. The Roadmaster Nighthawk part # RM-676 comes with a 4-way round to a 7-way that would plug into your RV so I would replace the 4-way flat with the part # BLU63XR and you'd be fine. view full answer...
Hey Dave,
There should be no drilling required to install the etrailer Invisible Base Plate Kit # e44FV, but there is a small section where you'll need to cut a little notch out of the bumper in order for the baseplate to fit. view full answer...
For your 2024 Jeep Wrangler Willy's with the Blue Ox tow bars you are going to need the Roadmaster Tow Defender # RM-4750. The Tow Defender # RM-4700 is only for units that use the Roadmaster Crossbar style connections. view full answer...
Thanks for reaching out, Paul!
The wiring you're looking for is the T-One Vehicle Wiring Harness # 118786 from Tekonsha. Not only is this the most reliable kit we have for your 2019 Jeep Wrangler, but it also tees in behind your tail lights so it will work in tandem with any tow bar wiring you've installed or will be installing on your vehicle.
If you don't already have a trailer hitch then I also recommend installing the etrailer Trailer Hitch Receiver # e98856 because of the matte black... view full answer...
All of the available Blue Ox tow bars will fit the # BX1134 on your 2016 Jeep Wrangler. If I were to choose one it would be the Blue Ox Avail Non-Binding Tow Bar # BX7420. The Avail has all of the features typically found on their tow bars along with extra long arms which helps with tight turns. I have attached a link below to all of our Blue Ox tow bars for your reference. view full answer...
We have the Air Lift air bag kit part # AL60817 that fits your 2014 Jeep Wrangler but it would only work if you have the same length coils as the stock springs. If they are longer this won't work and we don't have a solution that might. view full answer...
The Nighthawk has built-in wires that can be used to charge your towed vehicle's battery when you also use Roadmaster charge line # RM-156-25 on the vehicle side to connect to the towed battery. If you don't have charge line coming through your RV's 7 way already then you'll also need the RV side charge line kit # RM-156-75.
The Demco Duo does not charge the battery.
The running lights on your towed vehicle should be turning on via the wires coming from the RV to your Towed vehicle via... view full answer...
For your 2022 Jeep Wrangler, I recommend using the Curt Custom Tail Light Wiring Kit for Towed Vehicles # C96JR which will not require you to splice any of your wiring and plug directly into factory wiring.
As far as braking system goes, I recommend the Roadmaster InvisiBrake # RM-8700. This is a one time setup, supplemental braking system, that will get wired directly to the battery and the electrical harness.
You are also going to need a stop light kit # RM-751490, which will ensure... view full answer...
The Curt Adjustable Tow Bar # C19745 you purchased will not fit any base plates. It is specifically designed to mount on a flat metal section of your bumper using the universal bumper brackets. If you want to use the # 1439-3 on your 2012 Jeep Wrangler you would need a tow bar like the # RM-520. Keep in mind, this base plate kit is only designed to fit the Call of Duty- MW3 Edition and the Warn Elite bumper. view full answer...
No, need for pictures! I have exactly what you need. It is the Pollak 6 Pole to 4 Pole Connector Adapter item # PK12717. This will plug into your RV's 6-pin and allow you to control your Wrangler's lights through its 4-way connector. view full answer...