Hi Shawn; installation of the BedSlide Sliding Truck Bed Tray w/ T-Tracks # BE46UV will require drilling. The frame the tray sits on will be attached to the truck bed using rivnuts. I went ahead and attached an installation video from another BedSlide below so you can see what the process is like. view full answer...
The bed width I'm seeing for a 2004 Ford F-250 is 51.1" so with the UWS Truck Bed Fender Well Toolbox with Drawers # UWS01624 being 8" wide you'd be left with 43.1" of space. A typical pallet is 40" x 48" so you should be able to still get a pallet in the bed. If you got the passenger's side # UWS01626 as well you would not have enough space for a typical pallet. view full answer...
For a RBW 15 hitch here are the instructions from the manual.
Rotate the handle of the hitch 180 degrees so that the handgrip is pointing up and pull the handle out until the slide bar is held open by the silver trip mechanism.
Slowly back the truck so that the bottom plate of the kingpin box slides onto the tabletop and the kingpin slides fully into the throat of the hitch head. Set the parking brake of the truck and place the transmission into park.
Visually verify the slide bar... view full answer...
Hey Robert,
The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-606 mounts to the stake pockets in the bedrails. If your Titan doesn't have stake pockets then it will just require some drilling in order to install. view full answer...
Welcome back! Since your 2018 GMC Sierra 2500 already has the B&W Turnoverball System item # BWGNRK1016-5W installed, you are going to need the B&W Companion 5th Wheel Trailer Hitch w/ Slider item # BWRVK3400-5W. Without the slider you're not going to be able to make full turns and you're going to run into your trailer.
The fixed B&W Companion item # BWRVK3500-5W isn't going to give you enough clearance.
To make towing with a 5th wheel easier I recommend adding the Curt 5th Wheel/Gooseneck... view full answer...
The # TFR250SDJ is the right choice for your 2023 Ford F-250. The # TFRTT350J has a different design for severe service which would be something like a slide-in camper or salt spreader you're keeping in the bed of the truck all the time. The regular Timbren Suspension Enhancement System # TFR250SDJ is what you want for support while towing your 5th wheel in the summer.
I have attached an installation video below for your reference. view full answer...
Unfortunately no, Don. Since the Kuat Ibex Customizable Overland Truck Bed Rack # KU56ZR uses bed rail clamps to install that would require the truck bed to be open and not covered by anything. view full answer...
Yes, it will! The TruXedo Elevate Truck Bed Rack System item # TX46NV works with the 2004 Nissan Titan's with a 6-1/2' bed. At it's highest setting it will sit 28" above your truck's bed sides. view full answer...
Hey Sherry,
As long as the stake pockets are unrestricted on your 2021 Ford F-150 you can install the Adarac Pro Series Custom Truck Bed Ladder Rack # A86RR with your tonneau cover. I tried to look up exactly how your cover installs on your truck but I wasn't able to find an exact photo of it.
I'm attaching a video of this ladder rack being installed as well as a photo showing the where the rail installs on the truck bed sides. If you can send me some photos of your setup I can compare... view full answer...
The Sliding Curt E16 5th Wheel Trailer Hitch # 16516 along with the Curt Custom Fifth Wheel Installation Kit # C16418-204 will allow you to pull your 2003 Keystone Cougar 286 behind your 2002 Silverado 2500HD crew cab short bed. I would also install the 7-Way # 41157 in your bed so you do not have to risk damaging the wiring over the tailgate and running down to the bumper connection. view full answer...
Hopkins does not list the EasyLift Truck Bed Tailgate Lift Assist # 74211 as a fit for the 2000 Toyota Tundra, so this may be why they were not able to confirm it. Technically this item is not custom fitted for any specific vehicle. That said, we have had multiple customers report to us that it does indeed fit the early 2000s Tundra. In fact within the last 2-3 years we have received confirmation that it has worked on a 2000, 2001 and 2002 Tundra, so based on this we can tell you that it... view full answer...
Hey Justin, for your 2018 Ram 1500 that has the 5-1/2 foot bed and a Gator roll up tonneau cover that does not go over the bed rails you'd want the Thule TracRac SR ladder rack part # TH43003XT-784EX which has an over the cab extension like you wanted as well.
This sliding rack installs through the top of the bed rails so it would not interfere with your tonneau. view full answer...
Hey Chad, thanks for reaching out!
The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1000 is for standard trucks. Since your 1999 Chevy is a flat bed you need the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500 instead which installs via welding. view full answer...
Installation of both the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1394 for your 2002 Ram 2500 and # BWGNRK1308 for your 2009 Ram 3500 Mega Cab short bed will not require the bed to be lifted or disconnected in any way. The instructions for both do mention a lifting device is recommended but this is only for holding the center hitch section under the bed while you bolt it up to the cross rails.
I recommend getting a Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring... view full answer...
Hey Kevin,
Yes, the base of your Companion can be swapped out with the # BWRVB3775 if your 2023 Chevy Silverado 2500 has the in-bed puck system. If you don't then you can swap back to the Turnoverball base # BWRVB3405 and install the Turnoverball hitch # BWGNRK1020-5W in the bed. view full answer...
Hi Andrew,
You can use your tonneau cover with the Thule Insta-Gater Pro Truck Bed Bike Rack # TH93VR.
The rack itself won't interfere with your tonneau cover; obviously with a bike mounted to it the cover won't close because the bike will be too tall, but the rack itself is perfectly fine to use with a cover. view full answer...
Hi Rod,
It is possible you can use the etrailer Hard Tonneau Cover # e95DR with a bed extender, but it depends on how the extender installs. The extender would need to be even and no further than where the tailgate installs, like the Curt Universal Truck Bed Extender with Fold-Down Tailgate # C57WR. view full answer...
Allan, there are no automatic sliding 5th wheel hitches that will work with your Turnoverball, unfortunately. B&W does make a sliding hitch, the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3400, which drops right into your existing Turnoverball hole. view full answer...
Hey Robert, you do not need to more than the one brown wire (running light circuit) for the lighting on your bed. Just the one circuit would power all of the lights easily. view full answer...
Hey Thomas!
The Leer Hard Tonneau Cover # LE76MR will perfectly on your 2024 Ford Maverick, even if you have the side cargo rails installed in the truck bed. The clamp system can be maneuvered for easier installation and won't interfere with the rails. view full answer...