Yes, we do. You'll want the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System item # SM99209. This system is confirmed to work with a 2023 Jeep Wrangler. It has all necessary parts to connect to the Demco Air Force One item # SM99243 you already have installed.
I have linked an installation video below. view full answer...
I attached a picture that has the most relevant dimensions of the Curt # 31408. The length of the main crosstube as well as the distance between the mounting holes. The vertical height would be just a little over 2-1/2 inches.
Our hitch manufacturers generally don't like to give out schematics for copyright right reasons but if you have a more specific dimension you are looking for I can get that for you. view full answer...
The capacity of the Ultra Fab Power Twin Stabilizers part # UF39-941707 is 6,000 lbs which means it can support up to 6,000 lbs. So typically a camper weighs quite a bit more than that so you'd need to make sure you weren't supported the full weight of a camper on it.
This weighs a total of 115 lbs. view full answer...
The Roadmaster StowMaster Tow Bar item # RM-501 uses a crossbar style base plate. The correct one for your 2007 Jeep Wrangler is the Roadmaster item # 1429-1 if you have the standard factory bumper or item # 1430-1 if you have the Mopar or Warn bumper.
I have linked an installation video below for the first one to help you get it set up. I have also attached both sets of instructions.
Some other parts you will need to flat tow your 2007 Jeep Wrangler are listed here:
Battery Disconnect... view full answer...
The smallest most low profile 7-Way connector we have is the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter w/ 4-Way Vehicle End Plug item # HM47180. It measures just 2.9"w x 3.9"d x 6.9"h and weighs less than a 1 lbs.
I have linked a diagram below to show you the dimensions.
The Hopkins Endurance item # HM47180 includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use... view full answer...
To flat tow your 2021 Jeep Sahara Unlimited Altitude behind your 2023 Coachmen Encore 325SS class a RV you will need the following parts:
Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. This diode kit allows you to use your Jeep's tail lights and wiring system while... view full answer...
Westin tube steps, including # 20-3315 for your 2013 Jeep Wrangler, have a weight capacity of 300 pounds. The weak point is not the bars but where they attach to the vehicle because that is where the most force will be applied when stepping on the bar. I have included a link to a video showing an example installation of these bars for you. view full answer...
I spoke with Bestop and they let me know that the measurement from the top of the backrest to the top of the headrest on the Bestop TrailMax II Fold & Tumble # B3943515 is 17 1/2" and the headrest is adjustable up to 26".
They also added that the headrest measures 5 1/2" from top to bottom. view full answer...
My technical contact at RVS confirmed that their WiFi Wireles Hitch Backup Camera System # RVS-83112-WIFI is usable up to 50-feet away so it will be fine for your application. view full answer...
The Curt Front Mount Receiver, part # 31408 has a 3500 lb towing capacity, a 350 lb tongue weight capacity and can handle 9000 lb line pull when used with a winch. The receiver has plenty of capacity for handling the SnowSBear Plow.
I will include a link to the Receiver installation instructions as well as a product description video for the SnowSport Plow. You can find these links below. view full answer...
The etrailer Hitch Mounted Spare Tire Carrier - 2" Hitch item # e98ZR will hold your 37”x12.5”x17” spare provided that the trailer hitch on your vehicle is also capable of supporting the combined weight of the spare and the carrier. You will want to check the tongue weight capacity of your vehicle and hitch to ensure it can support a 121 lbs tire and the 15 lbs tire carrier. view full answer...
The MaxxTow Adjustable Ball Mount, Part # MT70068, has a distance from the center of the hitch pin hole to the upright of 8-1/8 inches. This part includes both a 1/2-inch pin and clip to secure the ball mount, and a 5/8-inch pin and clip to secure the shank in your 2 x 2 inch hitch receiver.
I have provided a link to a video review of this item and a drawing with several key measurements indicated.
Also I have included a link to our product page for all adjustable steel ball mounts with... view full answer...
The distance between the holes that the post fits through on the replacement quick disconnect crossbar part # 910021-00 is 28-1/2 inches. view full answer...
The distance from the center of the hitch pin hole to the rear of the bottom reinforcing gusset is 3-3/4 inches. The distance from the hitch pin hole and the top gusset is right at 4 inches.
I have edited a photo showing how the measurements relate to the # AMAC1 shank. view full answer...
The dimensions of the bumper mount adapters for Jeep Wranglers # RM-035-1 which is 1 inch and # RM-035 which is 3/4 inch is referring to the thickness of the shackle mounts. They have adapter pins which allow them to fit 1 inch and 7/8 inch diameter holes. view full answer...
Your 2014 Jeep Wrangler is not rated for towing a trailer that is as big as your hitch is rated for. Your hitch is rated for 7,500 lbs, but your vehicle is likely rated for 3,500 lbs or even less at 2,000 lbs depending on your engine, axle ratio, and transmission combination. The descriptions are listed in the owner's manual. Many hitches are independently tested and are rated for capacities that exceed the vehicle manufacturers capacities for the vehicle.
If you don't yet have a ball... view full answer...
The Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel # AM20305 can easily withstand 65 psi as long as you have a valve stem installed in it that is rated high enough like with the # AM20906. view full answer...
According to my Bestop Representative, their TrailMax II fold and tumble rear bench seat measures 33 inches wide, exactly. The seat is a bolt-on fit for Jeep CJ and Wrangler models from 1955 through 1995. view full answer...
The distance between the two tow bar connection points on the etrailer Invisible Base Plate Kit part # e98946 which is a fit for a 1997 - 2006 Jeep Wrangler with standard factory bumper is 24". This will then be compatible with many tow bars like the etrailer SD Non-Binding Tow Bar part # e34ZR. view full answer...