Expert Answers about Chevrolet Tracker

• Flat Tow Wiring for a 2001 Chevy Tracker
• The wiring used for flat towing a vehicle is different than what you would use to tow a trailer with your 2001 Chevy Tracker so while I can definitely help you out with wiring, it will need to be a splice-in application instead of using the plug that you found. To match what you're wanting to do we have a few options. I like the idea of swapping the 6-Way on your RV over to a 7-Way simply because the 7-Way is a little more standard but it's up to you. For 7-Way RV connection you'll need...
  view full answer...


• Parts Needed to Flat Tow a 2001 Chevy Tracker Behind a Motor Home
• I found a copy of the owners manual online for the 2001 Chevy Tracker and found that you can flat tow it (see section 4-44 in the owners manual). There are specific procedures outlined in the manual that you will need to follow. There are at least 5 items you will need to flat tow the Tracker. First you will need base plates like # 1012-1. The base plates provide a safe and secure attachment point for the tow bar, which is the next item you will need. For a compatible tow bar I recommend...
  view full answer...


• Parts Needed to Flat Tow a 2000 Chevy Tracker Behind a Motor Home with an Aladdin Tow Bar
• You would need to use an adapter to use a Blue Ox Aladdin tow bar with the Roadmaster base plates, # 1021-1, because the 2 manufacturers attach differently. Use adapter # BX88178. Or the other option is to use Blue Ox base plates, # BX1636 to match the Aladdin tow bar. Since you already have the Aladdin tow bar which comes with safety cables, you should not need to add any. But if you do you can use # RM-643. You will also need a lighting solution and supplemental braking. For lighting...
  view full answer...


• Are the Roadmaster Quick Disconnects # RM-201 Necessary for the Roadmaster Tracker Tow Bar # RM-201
• If you want to easily hookup and disconnect the Roadmaster Tracker Tow Bar, # RM-020, from Roadmaster XL Base Plate Kit, # 1012-1, then I strongly recommend using the quick disconnects. This is the easiest method of hooking up and an disconnecting. It would seem easy enough to remove the pins holding the base plate draw bars or removing the pins for the tow bar arms, but those are points that will be subject to binding. After towing, it will not be very easy to remove either of those...
  view full answer...


• Parts Needed to Flat Tow a 2000 Chevy Tracker 4x4 Behind an RV
• I checked the owner's manual for the 2000 Chevy Tracker and you can flat tow 4x4 versions of the 2000 Chevy Tracker! See pages 4-44 and 4-45 in your manual for additional information. To flat tow the vehicle you will need base plates, a tow bar, safety cables, lighting, and supplemental braking. For base plates you can use Roadmaster XL base plates # 1012-1. With them you can use the Tracker tow bar # RM-020. But to make the base plate arms easily removable you will also need quick disconnects...
  view full answer...


• Parts Needed to Flat Tow a 2003 Chevy Tracker behind a Motor Home
• You will need to look up a 2003 Chevy Tracker because Geo ended in 1997. For a 2003 Chevy Tracker you can use the Demco kit # DM9518079. For a compatible tow bar I recommend the Demco Commander # DM9511012. It is rated for 6,000 pounds and also includes another item you will need, safety cables. I have included a link to the installation instructions for you to view. Next you will need a lighting solution. If you will not be towing the Tracker very often I recommend a magnetic kit like...
  view full answer...


• Parts Needed to Flat Tow a 2002 Chevy Tracker Behind a Motor Home
• Yes, the Roadmaster base plates, # 1012-1, will fit your 2002 Chevy Tracker and the tow bar, # RM-020, is compatible with the base plates. But you will also need quick disconnects, # RM-201, to make the tow bar easily removable from the vehicle. Before you go any further though you will want to consult the vehicle owners manual to make sure that you can flat tow the vehicle and if so if there are any special requirements. You will need just 3 other items to flat tow the vehicle if permissible...
  view full answer...


• Parts Needed to Wire Lights on a 1999 Chevy Tracker for Towing Behind a Motorhome
• You can use a kit, like RoadMaster Part # RM-154, to wire your 1999 Chevy Tracker. With an amber turn signal vehicle, you can skip those bulbs and use the brake bulbs for both brake and turn functions. Essentially you ignore that the amber turn signals are there and wire the vehicle like you would a trailer. The amber turn signals will still function when you drive the Tracker, but not when it is towed. The second wiring diagram on the RM-154 page shows how you would wire your set up. I...
  view full answer...


• Blue Ox Parts Needed to Flat Tow a 2002 Chevy Tracker Behind a 2006 Winnebago Adventurer Motor Home
• There are 5 basic components that you will need to flat tow your 2002 Chevrolet Tracker behind your 2006 Winnebago Adventurer. You will need base plates, a tow bar, a wiring kit, safety cables and a supplemental braking system. You would only want a fuse bypass switch if your vehicle requires fuses to be pulled when flat towing. To determine this, I recommend checking your owners manual under the recreational towing section. From my research, I could not find any information that showed...
  view full answer...


• What Base Plates Are Needed For Towing A 2000 Chevy Tracker 4-Door 4WD
• The base plates that you will need for the 2000 Chevy Tracker 4-Door 4WD are the Roadmaster XL Base Plate Kit, # 1012-1. These base plates will not work on models that have a brushguard. These XL series brackets are compatible with the RoadMaster Falcon 2 Tow Bar, # RM-520. You will also need the RoadMaster 68 Inch Single Hook, Coiled Safety Cables, # RM-643, these safety cables will keep the vehicle attached to the tow vehicle in case the coupler becomes detached from the hitch ball. I...
  view full answer...


• Is a Base Plate Kit Available Without the Removable Arms for a 2001 Chevrolet Tracker
• All of the base plate kits we sell come with the removable arms. Base plate kits are made with a specific set of removable arms at the factory, so no set of arms is completely identical. The frame bracket mounts of the base plate kits are not available separately from the removable arms. With that being said, the Roadmaster XL Base Plate Kit, # 1012-1, is compatible with your 2001 Chevrolet Tracker and it will come with a set of removable arms that were designed to fit that kit. Keep...
  view full answer...


• Everything Needed to Allow Flat Towing of My 2000 Chevy Tracker 4 door Behind Motorhome
• You are headed in the right direction. The Roadmaster XL Base Plate Kit, item # 1012-1, will fit your 2000 Chevrolet Tracker, as long as you do not have the factory brush guard option on your vehicle. The RoadMaster Tracker Tow Bar, item # RM-020 will work nicely with the 2000 Tracker that should weigh in at less than 4,000 lbs. To connect the Tracker tow bar to the XL base plate kit and be able to remove the base plate draw bars you will also need the Roadmaster Tow Bar Quick Disconnect...
  view full answer...


• Parts Needed to Flat Tow a 1999 Chevy Tracker Behind an RV
• Base plates of one manufacturer can often be used with a tow bar from another manufacturer but you need adapters to do it. I recommend getting both the base plates and tow bar from the same manufacturer to avoid the adapters altogether. I recommend the Demco base plates # DM9518079 for you with a Demco tow bar like the Commander II # DM9511012. In addition to the base plates and compatible tow bar you will also need safety cables, lighting, and supplemental braking when flat towing the...
  view full answer...


• Repair Kits Needed for Older Roadmaster Sterling Tow Bar
• You've been doing some great research! I reached out to my contact at Roadmaster who said that the 2 kits you need to service your older Roadmaster Sterling tow bar are parts # RM-910003-40 and # RM-910003-30 like you referenced. These come with detailed instructions on how to take the tow bar apart and install all of the parts. He also said that when you take it apart you can clean the various parts with some Dawn dish soap to help keep them clean. The Bushing # RM-200029-00 you referenced...
  view full answer...