In order to use the Roadmaster Tracker Tow Bar part # RM-020 on a 1999 Chevrolet Tracker you'll need the Roadmaster Crossbar-Style Base Plate Kit part # 1012-1. I have attached a list of other parts you'll need as well below.
RoadMaster 68" Single Hook, Coiled Safety Cables part # RM-643
Tow Ready Tail Light Isolating Diode System part # TR118821 view full answer...
The Bestop Replacement Rear Window # B354-24 you were looking at is a replacement window for a top that does not fit your vehicle. I do show that Bestop Replace-A-Top - Black # B5136601 is confirmed to fit your 2003 Chevy Tracker, but this is the entire system and not just a replacement window. If you need just a replacement window for this kit then the part number is 353.24P and you can get it through Bestop. view full answer...
The base plates, # 1012-1, are XL style base plates for the 1999 Chevy Tracker and are compatible with the Roadmaster Explorer tow bar. To make the XL base plates drawbars removable, you may also need the Roadmaster Tow Bar Quick Disconnect Kit, # RM-201. view full answer...
The trailer wiring harness will not be affected by the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700, the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267, or the Roadmaster Brake-Lite Relay Kit for Towed Vehicles part # RM-88400 that you have on your 1999 Chevrolet Tracker. The diodes included with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit simply stop the backflow of power therefore you can install the Curt T-Connector Vehicle... view full answer...
I spoke with my contact at Curt and she stated that the adjustable tow bar 19745 has brackets on it that are universal. In other words, he could not say if it was a fit with Roadmaster base plates. Also, Roadmaster does not list an adapter for the Curt tow bar. Based on this information I cannot say whether or not the Curt tow bar is compatible with Roadmaster base plates.
What I recommend is to stay with a Roadmaster tow bar or at least a tow bar that Roadmaster does make an adapter for.... view full answer...
If you already have a Roadmaster Even Brake # RM-9400 and want to move it between 2 different vehicles then you would use the second vehicle kit # RM-98400. But if you do not have any braking system then you would not install RM-98400 and instead would get the Even Brake # RM-9400.
If you go with the Even Brake then a 12 volt power port, # RM-9332, is recommended because the one in the vehicle, if equipped, will not be active when the vehicle is being flat towed. view full answer...
The AirLift 1000 Rear Air Helper Springs # AL60793 that you referenced are a fit for all versions of the 2004 Chevrolet Tracker. In some instances certain specific versions of a vehicle may be an exclusion to the fit of certain items, but when this is the case we call it out specifically with an 'except' in the fit information.
Proper air bag installation requires leak-free air hose connections. We find the best results come from using a cutter that ensures perfectly square cuts, an item... view full answer...
The RoadMaster base plate kit for a 2000 Chevy Tracker is part # 1012-1 and these XL style brackets are compatible with RoadMaster Blackhaw tow bars. view full answer...
The RoadMaster Tail Light Wiring Kit with Bulbs, part # RM-155, will not work on a 2001 Chevrolet Tracker. There will not be enough room in the taillight housing to fit the extra bulb.
The tow bar wiring harness you will need for your 2001 Chevrolet Tracker is the RoadMaster Universal Hy-Power Diode Wiring Kit, part # RM-154. On your 2001 Chevrolet Tracker with the 3-wire system (separate brake and turn signals) this wiring kit will use the vehicles brake lights to function as both brake... view full answer...
The # SB324-167 plow you'd looked at is compatible with a 1998 Tracker, but the Custom Mounting Brackets are sold separately.
The specific install kit needed will depend on the number of doors the Tracker has. For a 2 door, use # SB397-050 or # SB397-083 for a 4 door.
If you click the provided link, you can see a product demonstration video. view full answer...
Yes, the Roadmaster XL base plate kit part # 1012-1 that you referenced is compatible with the Stowmaster 5000 tow bar part # RM-501 that you have. The removable arms of the base plate kit would easily attach to the crossbar of the tow bar.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight... view full answer...
The correct base plates for your two-door 1998 Chevrolet Tracker are the Roadmaster XL Base Plate Kit - Removable Arms # 118-15. We do not have a video showing an installation of these plates, but the kit comes with everything you'll need except for Loctite Red # LT37420, which you'll use on all bolts when mounting the bracket.
I've added a link to the instructions for you to take a look at; it's not a video, but it should provide you with a good idea of what the installation process... view full answer...
I checked with the hitch manufacturers and the only hitches for a 2002 Chevy Tracker mount at the rear of the vehicle as opposed to the front; there are no front-mounted hitches that fit this particular car.
The 2 inch rear-mount trailer hitch that fits an '02 Tracker is the Curt # C13517. view full answer...
Yes, the Roadmaster Even Brake, # RM-9400, is listed as a fit for your 1999 Chevy Tracker. A 12 volt outlet kit, # RM-9332, is also recommended for proper functioning of the braking system.
I have also included a link to the right to the braking systems we have recommended for your Tracker. view full answer...
Yes, the Tow Ready Tail Light Diode System # TR118821 referenced in your question will work great on your 1998 Chevy Geo Tracker. This is a combined diode system that will let you tap into the signal light circuits on your Tracker so they will accept those from the RV while being towed. It includes a 4-Way connector and extender loop to connect with a 4-Way on the RV.
I have attached a short video review along with the written installation manual that you can check out as well.
In order... view full answer...
I checked with Draw-Tite and trailer hitch # 41537 fits all styles of the 1999 to 2004 Chevy Tracker so that would include a 4-door 4-wheel drive model.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or... view full answer...
The Rampage Replacement Soft Top Fabric # RA98935 that you referenced is confirmed to fit all model Chevy Trackers from 1999-2003 so it should work well on your 2001 Tracker. view full answer...
There are 2 possible options for your 1998 Chevy Tracker. If you have the Suzuki Sidekick motor (that came in the 1998 Geo Tracker) then the part # 1007-2 is what you want, otherwise my contact at Roadmaster said that the kit # 1012-1, which fits a 1999 Chevy Tracker, looks like it is compatible. From the picture you sent in I'm pretty sure the part # 1007-2 is the one you want.
Either kit will fit with the Eagle 8000 Tow Bar system that you are currently using.
For a complete flat towing... view full answer...
I would first recommend to check your owners manual or check with Chevrolet regarding any guidelines or modifications that might be necessary to flat tow your 1999 Chevrolet Tracker. Some vehicles require modifications such as a drive line disconnect, transmission lube pump, freewheeling hubs or axle disconnects.
To use the Tow Ready Adjustable Tow Bar, part # 63180, on the Roadmaster XL base plates you will need to use the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, part # RM-025,... view full answer...
Go To Results