Expert Answers about GMC Sierra
- Will GM Cargo Management System Prevent Access TonnoPro Tonneau Cover Install on 2010 GMC Sierra
- The cargo management system is an optional track system mounted in the truck bed on the inside of the bedside up near the top. The presence or lack of this system will influence the fit of a tonneau cover because the system can interfere with the way some tonneau covers install on the truck.
However, the Access TonnoSport you have looked at, part # A22020289 will fit whether or not your truck came with the cargo management system. Either way, it'll fit perfectly.
view full answer... - Weld-on Bracket Compatibility with Extreme Off-Road Swing Up Jack
- The Extreme Off-Road Swing-Up Jack w/ Dual Wheels - Sidewind - 1,100 lbs - Zinc # ORJW500D does not have a weld on option. It likely can be retrofitted to work with a bolt thru weld on bracket like the Jack Mounting Bracket for Fulton Marine Jack - Weld-On # P9012-00.
view full answer... - Easiest Front Mount Trailer Hitch Receiver For a 2003 GMC Sierra 1500 SLT
- I recommend the Curt Front Mount Trailer Hitch Receiver # 31302 for your 2003 GMC Sierra 1500 SLT extended cab with the 6.5' bed. This is our easiest front receiver to install as the frame mounting brackets are separate from the receiver cross tube. I have linked an installation video below for you to see where the brackets mount.
I like using the WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL with the front mounted receiver as it makes it much easier when I...
view full answer... - Reese Universal Brackets and Base Rails for 2000 GMC Sierra
- The correct installation kit for your 2000 GMC Sierra, which includes the brackets, is the Reese Universal Installation Kit for 5th Wheel Trailer Hitches (No Base Rails) - 10 Bolt # RP30439. For this you'll need compatible base rails, the Reese Universal Base Rails for 5th Wheel Trailer Hitches # RP58058.
This kit can be purchased together as well, the Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt # RP30035. I've added links to video reviews for...
view full answer... - Compatibility of K-Source Extendable Towing Mirrors 62075-62076G With Factory Mirrors Not Heated
- The K-Source Custom Extendable Towing Mirrors - Electric/Heat w LED Signal - Textured Black - Pair # KS62075-76G will work on your 2005 GMC Sierra, but you will not gain the heat function. You will still have the electric adjustment and LED turn signal functions with the extendable mirror.
view full answer... - What Lippert Pin Boxes are Reese Goose Boxes Compatible With
- I was unable to find any reference to an LC20517 pin box but I can tell you that the Reese Goose Boxes do have specific mounting holes they use depending on the pin box they are replacing; if you take a look at the linked installation instructions you can see this.
In regards to the correct one for you, it will depend on what pin box model you have, which should be on a sticker on the pin box itself. If for some reason it is not you can always contact the manufacturer with the serial number...
view full answer... - Recommended SumoSprings For 2004 GMC Sierra 2500 HD Towing Travel Trailer
- For your 2004 GMC Sierra 2500 HD towing a travel trailer, the best option for SumoSprings to help with the sag you are getting are the black version, which is the following part number:
- SumoSprings Solo Custom Helper Springs # SSR-211-47
The black # SSR-211-47 have a 1,500 lb capacity (at 50 percent compression), which means when you are towing, they won't be as compressed as the lighter-duty springs, allowing more forgiveness in your ride and better overall stability.
The unloaded...
view full answer... - Gooseneck Pin Box Replacements For A Lippert Trailair Rota Flex 5th Wheel Pin Box
- The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs
Item # RP94720 will replace your Trailair Rota Flex Mount if it's a 1621.
The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert 1116/1716 - Manual Latch - 21K
Item # GY43FR will replace your Trailair Rota Flex Mount if it's a 1116.
There should be a sticker on the side or the top of the pin box that will have a model number and serial number for your pin box that...
view full answer... - Correct MagnaFlow Cat-Back Exhaust System for 2003 GMC Sierra with 6.0L V8 Short Bed Extended Cab
- I checked with Magnaflow and the MagnaFlow Stainless Steel Cat-Back Exhaust System part # MF15838 is correct for a 2003 GMC Sierra with 6.0L V8 Short Bed Extended Cab.
view full answer... - How To Select Pace Edwards Ladder Rack for 2014 GMC Sierra 1500
- The difference between these two part numbers is which vehicles they are designed to fit. The Pace Edwards Contractor Rig # 311-CR6007 fits 67-87 GM CK Series Pickups with 8ft bed as well as 74-96 Ford F-150 and Super Duty, while the # 311-CR3005 fit a wide variety of trucks with a 6-1/2ft bed.
These ladder racks do not include the bottom rail. They are attached to the truck with Pace Edward's Explorer rail. This rail fits with Pace Edwards tonneau covers Bedlocker, JackRabbit, and Full...
view full answer... - Derale Transmission Fluid Cooler For a 2006 GMC Sierra 2500HD With AN Transmission Lines
- To attach the Derale 19-Row, High-Performance, Stacked-Plate Cooler # D51978 you will need to get the correct fittings to match your AN fittings you added to your transmission lines.
Derale -6 AN Aluminum Fitting # D59006
Derale -8 AN Aluminum Fitting # D59008
Derale -10 AN Aluminum Fitting # D59010
Derale -12 AN Aluminum Fitting # D59012
You will be able to run the lines directly to the cooler and remove the lines that go into the radiator. I do recommend using a Edge Insight CS2 Comprehensive...
view full answer... - Replacement 7-Way Plug for 2009 GMC Sierra 2500
- There are no retaining clips and zip ties or duct tape may not hold the connector so the best option and what I recommend is to replace the factory 7-way of your 2009 GMC Sierra with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55774.
This will plug right into your truck's factory tow package port and give you a permanent solution so you won't have to worry about a loose connection.
view full answer... - Install Kit for a Reese 5th Wheel Trailer Hitch Part # RP30051 on a 2006 GMC Sierra 2500HD
- Yes, the Reese 5th Wheel Trailer Hitch part # RP30051 that you have can be installed on your 2006 GMC Sierra 2500HD using the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part # RP50064-58. This kit is a custom fit and will not require any drilling into the truck's frame.
I have attached a sample install video of this kit to give you a better idea of what is involved.
view full answer... - Westin Sportsman Grille Guard for 2011 GMC Sierra 2500 HD
- For your 2011 GMC Sierra 2500 HD you need the Westin Sportsman Grille Guard # 45-3660 as the part # 40-1245 you referenced fits older 2500 and 3500 HD models. The part that fits is only offered in stainless steel at this time because the black version, part 40-3665, is no longer available.
If you'd rather go with a black powder coat steel option then we do have the HDX model available as part # 57-3665. This is basically the Sportsman grille guard but with a beefier look.
view full answer... - Westin 6" Premier Nerf Bar Options for 2016 GMC Sierra 1500 SLE
- We do have the Premier series nerf bars for your 2016 GMC Sierra 1500 SLE. I'm not sure what size cab you mean when you say box cab but here is a list of the different fits for the different cab sizes:
Regular Cab
Black - # 22-6005-2005
Stainless Steel - # 22-6000-2005
Crew Cab (non-diesel)
Black - # 22-6045-2015
Stainless Steel - # 22-6040-2015
Double Cab
Black - # 22-6025-2015
Stainless Steel - # 22-6020-2015
view full answer... - Weight Distribution System for a 2106DS Micro Minnie Winnebago
- If the gross trailer weight (GTW) is over the 50% of your gross vehicle weight rating (GVWR), the use of a weight distribution system is recommended. In order to be sure you are choosing the correct weight distribution system, you will want to find the total tongue weight of your towing setup by adding the tongue weight of both your loaded and ready to tow trailer and any cargo stored behind the rear axle of the truck.
The average total tongue weight (TW) rating of a trailer is typically...
view full answer... - Will Firestone Airbags Work With a Gooseneck Trailer Hitch On a 2013 GMC Sierra 2500
- Yes, the Firestone Ride-Rite Air Helper Springs part # F2596 will work with the Hide-A-Goose Underbed Gooseneck Trailer Hitch part # 9465-56, the Curt Overbed Folding Ball Gooseneck Trailer Hitch part # C61301-52, or any other gooseneck hitch on your 2013 GMC Sierra 2500 for that matter. The brackets for the airbags install in place of the bump stops and the brackets for the gooseneck hitch install on the outside of the frame rail so these two will never interfere with one another.
I have...
view full answer... - Do Westin Nerf Bars 23-1955 Fit 2012 Sierra 2500 and 2008 Sierra Crew Cabs
- Yes, the Westin E-Series 3-inch black nerf bars # 23-1955 that you referenced do fit both of the trucks you mentioned. These steps fit the 2012 GMC Sierra 2500 Crew Cab; they also fit the 1500 and 3500 Crew Cabs. They also fit the 2008 Sierra Crew Cab, including the 1500, 2500 and 3500.
If you need a replacement installation bracket and hardware kit we do offer this, part # 23-195PK.
view full answer... - Can a 5th Wheel Install Kit be Installed on 2013 GMC Sierra w/Curt Gooseneck Hitch Already Installed
- In order to install a different 5th wheel or gooseneck installation kit in your 2013 GMC Sierra the old one, C611-605, would have to be completely removed.
The alternative is to keep the gooseneck hitch you have and use the X5 adapter, # C16220, and a hitch that fits in above the bed 5th wheel rails such as the Curt Q24, # C16546. I have linked a video review of this hitch for you.
view full answer... - Will Derale 16 Pass Electra-Cool Transmission Cooler Fit a 1999 GMC Sierra
- Transmission coolers are universal fit items, they are not vehicle specific. So long as you have the space needed to mount it, this cooler can be used on your 1999 Sierra. The overall dimensions for this unit are 15-3/4 inches by 11-1/2 inches by 5 inches.
You should have plenty of space in front of your radiator that you could mount a traditional transmission cooler like part # D13502 or part # D13504. There is enough airflow over front mounted transmission coolers that a fan is not necessary.
view full answer...
Go To Results