Trailer Hitch Receiver Confirmed to Fit a 2015 Audi SQ5
Question:
looking for a direct fit 2inch receiver hitch for my 2015 Audi SQ5 It would be used for pulling a 10foot trailer loaded might weigh up to 4000 lbs and also a 4 bike bike rack Ive seen different images of possible hitches and think the one you offer - P/N 75940 looks correct but there is also the response you made to another customer that the Curt C13136 fits their SQ5 and if you look at how the two would mount to the vehicle, their night and day different. With that, which is the right one? Thanks
asked by: Paul
Expert Reply:
The Curt # C13136 is for the Audi Q5 but isn't a fit for the SQ5 like you have. You're correct that the Draw-Tite, part # 75940, is what you need. It's confirmed to fit your 2015 Audi SQ5. I've attached a picture that a customer submitted of the htich on an SQ5 for you. I've also linked an install video on a Q5 but the process is same.
The wiring I recommend is part # 119250KIT. I've linked a video of this install on a different Audi model but keep in mind it's a universal part, so it won't be the exact same process. You'll need to test the wires of your Audi to find the correct circuits. The # 119250KIT includes a circuit tester and installs without splicing into your current wiring.
If you're going to be towing the trailer and carrying the bikes at the same time I recommend the Curt Multipurpose Ball Mount, part # D210. You need a hitch ball with a 1 inch diameter shank; Use # 19260 for a 1-7/8 inch, # 63845 for a 2 inch, or # 63847 for a 2-5/16 inch. If you're not carrying the bikes while towing then you can use a standard ball mount and matching hitch ball. I've linked our selection of ball mounts to fit a 2 inch receiver as well as an article to help you determine the proper rise or drop you need with your trailer.
I've also linked some other helpful articles on installing the hitch and towing.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Built-In Dual Hitch
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: How to Choose the Right Trailer Hitch Class
- Article: Where to Position the Trailer Axle?
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Q&A: Is the Aluminum A-Frame Trailer Tongue Toolbox 350970 Waterproof
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Article: Rooftop Cargo Carriers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations