Pop & Lock tailgate lock # PAL6100 does indeed fit your 2006 Honda Ridgeline. It will fit models with or without the factory backup camera.
I would say that either black, # PAL6100, or silver, # PAL6102, would look the best on your blue and gray Ridgeline. I have linked a couple of videos on these tailgate locks for you. The video I have linked would be pretty much identical to your 2006.
The lock prevents the handle from opening up far enough to release the latches holding the tailgate... view full answer...
At the widest point of the roller # CE29334 the bell measures 4 inches in diameter and at the narrowest portion in the center it measures 1-1/2 inches. view full answer...
The 2020 Honda Ridgeline has many model Tonneau covers that fit the composite bed/box. My recommendation is the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK48602 which offers a clean matte finish that matches your truck's OEM molding color really well. This installs to the composite bed without clamps and instead uses bolts. You will remove the 4 upper tie down hooks and reuse the 8 torx bolts so you will need a T50 Torx driver. There is a supplemental installation... view full answer...
I confirmed with the manufacturer that both Aries Grille Guards we carry for the 2021 Honda Ridgeline # AA6057 and # AA6057-2 will interfere with forward facing cameras and front censors. Although, Aries suggested that you might be able to take it to a Honda dealer to have them turn off the censors if wanted. With that being said, almost all grill guards (regardless of brand or model) will most likely interfere with front cameras and sensors. view full answer...
Yes, the K-Source universal tow mirrors part # KS3990 that you referenced do fit your 2019 Honda Ridgeline. These are a universal fit style of mirror but they were so well designed we have have found they fit the type of mirrors on your Ridgeline well.
I attached a review video for these mirrors on a similar 2019 Honda CR-V for you to check out as well to see how they install and perform. view full answer...
The only option for towing mirrors on your 2022 Honda Ridgeline are universal mirrors like the K-Source Universal Towing Mirror # KS3891-2. Unfortunately, there are no custom fit mirrors available. This is designed to fit most mirrors that are 4-1/2" tall to 11-1/2" tall. They require a lip or gap between the factory mirror and the glass. As long as the mirrors on your Ridgeline have this design these will fit.
The # KS3891-2 has a 7-3/4" tall x 5-1/8" wide mirror face and uses rubber... view full answer...
It looks like you have the Pop & Lock Custom Tailgate Lock # PAL8600. This kit includes the:
- Electrical Lock assembly and Slide Bolt
- Locking Bolt Linkage
- Zip Ties
- Long and Short Wire Harness
I do not see anything about a tension spring. It is possible that it is a part already present on the handle of your Ridgeline. If that is the case, we would not have the part. If it is one of the items in the # PAL8600 kit, we do not have replacement parts and a new # PAL8600 would be needed. view full answer...
To install the Curt front mount hitch # 33328 on a 2012 Honda Ridgeline, trimming of front air dam or fascia may be required. The instructions that I have linked for you shows what needs to be trimmed. I have also included a picture that shows what needs to be trimmed. view full answer...
Physically the Convert-A-Ball Ball Mount for 2" Hitches # AMSC2 would fit into various Gen-Y Rebel stacked receivers, but Gen-Y only recommends using their own ball mounts to avoid any issues with capacity. The # AMSC2 would sit so far out of the receiver that you're now adding more leverage and lessening the capacity to an unknown number.
If you look at any Rebel stacked receiver, such as the # GY92FR, you'll notice that the shank they use is much shorter than a traditional ball mount... view full answer...
For your 2023 Honda Ridgeline I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR. The main unit of this brake controller will install behind the dash so only the control knob will be visible in the vehicle. This gives it a nice clean look that won't take up space or be in the way. The knob controls the braking power and also acts as the manual override. It also uses colored LED signals for diagnostics. Since you have the tow package, you will also need the # 331-TPH-017 and... view full answer...
The connector pictured is not the correct one for the black module of the Tekonsha T-One Wiring Harness # 118778 to install into.
The correct one will be located behind the access door in the driver side of the rear cargo area in your 2019 Honda Ridgeline, and can be seen in the included picture as the 12-pin grey connector. You will find it in the center of cubby and it will not be connected to anything.
I went ahead and included a link to the written instructions for you to take a look at. view full answer...
The front to back bolt hole spacing on the Draw-Tite trailer hitch receiver, part # 41930, is approximately 18-1/4 inches from the front hole to the center hole and around 20-3/4 inches from the front hole to rear hole.
This hitch is confirmed to fit your 2002 Chevrolet Suburban. It's a custom designed product specifically for the 2001 to 2006 Suburban, 2006 to 2006 GMC Yukon XL, and the 2000 New Body Suburban that has amber turn signals. view full answer...
The recommended tow mirrors for your 2012 Honda Ridgeline are the CIPA universal mirrors part # CM11952-2. This will fit your vehicle well and are very stable too so you'll have a clear view behind you. view full answer...
The Curt Trailer Wiring Harness that you referenced, part # C56175, is not recommended for use with vehicles that have LED lights (but is compatible with trailers that have LEDs). This harness requires you to cut and splice wiring to install it.
I can offer you an easier solution that will not require any cutting of wires. TowReady T-One 4-Pole Trailer Wiring Harness # 118400 is a plug-and-play harness that simply plugs inline to your tail light assemblies without the need to cut or splice... view full answer...
The wiring harness you have in your glovebox is also for a trailer brake controller, it has a plug which matches the one under your dash therefore all you would have to do is splice on the universal wiring harness that comes with the brake controller. The other option is to use a completely custom harness like the ones you mentioned which don't require any splicing, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3070-P which will then work great with an option... view full answer...
Can you back the bolt out of the weld nut or does the weld nut continue to turn with it effectively preventing it from getting removed? This situations get a little tricky and they are very situational but typically it requires getting the old weld nut out of the way and then using an access hole in the frame to fish wire a new carriage bolt and block in it's place.
I attached a link to this page for what to do in your situation for you to check out. view full answer...
For your 2019 Honda Ridgeline the trailer wiring harness I recommend is the Tekonsha part # 118288 if you need a 7-way or part # 118778 for if you need a 4-way. These are the best wiring harness solutions as the Tekonsha brand is the most reliable option currently available due to their higher quality converter boxes.
If your trailer has a 7-way and brakes you'll need a brake controller to activate them for that our best option is the P3 # 90195. This is a proportional brake controller... view full answer...
The length of the male plastic piece of the Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers # EX1024 is 1-1/2 inches. This is the correct replacement tie-down for the Solid Fold 2.0 Series 83-xxx covers.
I have added a link below to a video review for you to check out as well. view full answer...
The Extang Solid Fold 2.0 Hard Tonneau Cover part # EX83590 will absolutely allow your trunk lid to open all the way on the 2019 Honda Ridgeline because it does not add rails inside of the bed like the other tonneau cover options. The Extang Trifecta 2.0 does not add rails in the bed either so it allows you to open your trunk lid all the way as well so it is also a good option but it is a soft cover.
Since it sounds like you are looking for a hard tonneau cover the Solid Fold # EX83590... view full answer...
Go To Results