Replacement Leaf Spring Needed with One Open End on a Bayliner Trailer
Question:
Im wanting to replace some old leaf springs on my Bayliner trailer. The center of bolt to bolt is 26-1/2. The height or D on your measurements is 5, compressed, not jacked up. The leaf width is 1-5/8. It currently has three leafs but if more leafs will work, Im game for whatever you suggest. The current spring has a closed circle on one end and a c-shape on the other end. The axle is a 5-lug. I couldnt find exacts, but Im guessing it is a 2000+ lb load trailer. Which spring do you suggest?
asked by: Chris H
Expert Reply:
It sounds like the 4-Leaf Slipper Spring w/ Open Eye End # e33SR could be what you are looking for. Over time leaf springs can stretch so this one being 1/4" shorter than your current leaf spring is most likely correct.
This leaf spring is rated for a 4,300 lb axle and comes with 4 leafs. The amount of leafs isn't really important since you are simply looking for the weight capacity to be right at or slightly more than what your axle is rated for.
The only real issue that I see is this leaf spring has a 1-3/4" width as opposed to the 1-5/8" width that you mentioned so you may want to measure again just to be sure. I am pretty confident though that this is the leaf spring for you.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- Open Eye
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Dacromet
- etrailer
more information >
Continue Researching
- Q&A: Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Q&A: Installation of Slipper Spring with Open Eye End
- Search Results: winch post
- Search Results: trailer winch stand
- Search Results: trailer winch post
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Shop: CE Smith Keel Roller Assembly for 3" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair
- Q&A: 2,000 lb Axle Leaf Spring Recommendation for Trailer that has 26-1/4 inch Long Springs
- Q&A: Should a Nylon Bushing Be Used With the Open Eye End Of Slipper Spring # e33SR
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Search Results: leaf springs
- Search Results: slipper spring bushing
- Search Results: 26.5 inch leaf springs
- Search Results: slipper spring bracket
- Video: Review of etrailer Trailer Leaf Spring Suspension - 4 Leaf Slipper Open Eye 4300 lbs Axle - e24SR
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE14016G Review
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-040275 Review
- Q&A: Hanger Kits to Use with 1-3/4 inch Wide Slipper Leaf Springs for Trailer
- Q&A: Which Way Do Slipper Springs Face on a Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 115706S Review
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation