Expert Answers about Buick LeSabre

Recommended Replacement Tire for a 4.80 / 4.00-8 High Speed Tire 60 psi
Based on the pressure rating of your current tires, I recommend using the Kenda K371 Trailer Tire, # AM10002. This is a tubeless trailer tire that fits on 8" x 3-3/4" wheels with the Load Range B tire rating of 590 lbs. at 60 psi. which will work on your older style wheel. Our 8 inch tires are all rated to 65 mph. We also offer a Load Range C tire, # AM10004, with a maximum load rating of 745 lbs at 90 psi, but you likely have Load Range B tires if they have a 60 psi rating. It is best...
view full answer...

Recommended Trailer Hitch and Wiring for 2005 Buick LeSabre
It sounds like you might be looking for a complete kit to set up your 2005 Buick LeSabre to tow a trailer. Starting with the trailer hitch, the Curt Class II Trailer Hitch # C12044 that you were looking at is confirmed to fit and will work well on your LeSabre. This will provide you with a 1-1/4 inch receiver and it features a towing capacity of 3,500 pounds. I took a look at the online owner's manual for your Buick LeSabre and found that it has a maximum towing capacity of 1,000 pounds....
view full answer...

Will Coil-Rite Airbags Keep 2000 Buick LeSabre Factory Auto Level System from Running All the Time
The automatic leveling system on your 2000 Buick LeSabre running frequently when towing a trailer is a common occurrence. Adding suspension enhancement such as # F4105 should help provided the stock suspension is all in good working order. You will want to check the rear coil springs on the vehicle. If there is nothing in the middle of the coil springs then you can use kit # F4105. But if there is a strut or air shock in there you would not be able to use this kit. I do not recommend...
view full answer...

Weight Rating Limits Regarding Cargo Carriers
When using a cargo carrier like # C18145, you want to consider the trailer hitch tongue weight capacity as well as if the vehicle manufacturer gives a tongue weight capacity. If the manufacturer specifies a tongue weight rating capacity you will find it in your owners manual under the trailer towing section. If they do not specify a rating, then you will compare the cargo carrier and the trailer hitch receiver ratings and go with the lesser of the two as you max capacity.
view full answer...

Fit of Thule Speedway Trunk Mounted Bike Rack Part # TH961XT on 2003 Buick LeSabre
According to my contacts at Thule, the Thule Speedway 2 Bike Rack, part # TH961XTR will fit your 2003 Buick LeSabre. This rack is a great choice for vehicles that do not have a receiver hitch. The Speedway can accommodate up to two bikes weighing up to 30 lbs a piece.
view full answer...

Availability of Class III Hitch for 2001 Buick LeSabre
A Class II hitch like the # C12044 is going to be the only option for your 2001 Buick LeSabre. Most cars only have a Class I or Class II hitch available since they aren't typically used for towing. If you really want a higher rated hitch with a 2" receiver you would have to take the # E17 to a fabricator. They would be able to take the receiver and fashion a custom hitch for your vehicle.
view full answer...

Can Derale Transmission Cooler Fit 1961 Buick LeSabre
It's possible, though aftermarket transmission coolers are universal fits, so you do need to ensure that you have enough room in your 1961 Buick LeSabre to use the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/ Barb Inlets # D13503. This cooler measures 11" wide x 8-3/4" tall x 7/8" deep and uses a radiator adapter fits vehicles with 5/16" transmission lines.
view full answer...

Installation Video For the Trailer Wiring Harness part # C59496
I don't have a video that shows how to install the Trailer Wiring harness part # C59496 on your specific vehicle. But I do have a video that shows this product being installed on a similar vehicle that will give you the basic idea on how it installs. I also attached installation instructions.
view full answer...

Trunk Bike Rack Recommendation to Carry 1 Bike on a 2003 Buick LeSabre
For your 2003 Buick LeSabre, I recommend taking a look at the Thule OutWay 2 Bike Rack, # TH910XT. The OutWay has many great features such as locks, anti-sway cradles, adjustable arms and it uses Thule's vehicle specific FitDial system so you do not have to guess how to mount the bike rack to your truck. It is the easiest and fasted trunk rack to install because it uses only 2 retractable cables while others use 6 straps. I have attached a review video of this bike rack for you to check...
view full answer...

Available Trailer Hitch Receiver Sizes for 2000 Buick LaSabre
All of the trailer hitches we carry that have been determined to fit the 2000 Buick LeSabre are Class II hitches and have a 1-1/4 inch hitch receiver. We do not have a hitch for the 2000 LeSabre that has a 2 inch hitch receiver. If you are looking to do some light towing, I recommend the Draw-Tite Class II Frame Receiver Hitch # 36309. The recommended ball mount for this trailer hitch is # 36063. You will also want a hitch ball, like a 2 inch hitch ball # 19258 or a 1-7/8 inch hitch ball...
view full answer...

Parts Needed to Carry a Motorized Chair with a 2005 Buick LeSabre
Out of the available trailer hitch receiver options for your 2005 Buick LeSabre I recommend installing the Draw-Tite Trailer Hitch Receiver # 36309 which is a Class II with a 1-1/4 inch hitch receiver. It does have a Tongue Weight (TW) rating of 300 lbs but you will be limited by the maximum TW rating of your LeSabre. I looked at the online version of your owner's manual and it stated that the max weight capacity of a trailer that your LeSabre can haul is 1,000 lbs and that the TW should...
view full answer...

Replacement Hardware for Draw-Tite Trailer Hitch on 2003 Buick LeSabre
We do have installation hardware available for the Draw-Tite Trailer Hitch Receiver # 36309. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. In this case you will enter 36309 in the "Hitch Item Number" field and then choose Draw-Tite under "Manufacturer." I attached an installation video for your reference.
view full answer...

Do I Modify My Auto Level Housing to Install a Draw-Tite Hitch # 36309 on my 2000 Buick Le Sabre
In order to install this Draw-Tite Receiver Hitch, part # 36309, you will need to remove the rearmost fastener which secures the load leveling control housing to the frame rail and discard it. You will then trim the load leveling control housing around where the previously removed fastener was. See the picture to the right for further clarification. Some other items you may need: Draw Bar # 36063 Ball # 19258 or 19256 Trailer Wiring # 119176KIT
view full answer...

Recommended Trailer Wiring Harness for a 2001 Buick LeSabre Limited
Since there isn't currently a plug and play option vehicle wiring harness for your 2001 Buick LeSabre Limited, I recommend the trailer wiring harness, part # C59496. This kit comes with a wiring harness, install kit, circuit tester, quick splice connectors and integrated 4-pole connector.
view full answer...

Availability of Plug-and-Play Trailer Wiring Harness for 2001 Buick LeSabre
There isn't a plug and play option available for the 2001 Buick LeSabre, most likely due to the age of the vehicle and the fact that it's not frequently used to tow. However, there is an available hardwire option. You can use part # C59496, which would wire directly into the wiring harness that feeds your taillights. The best place to tap into your taillight wiring is directly behind the taillight assemblies. Use the included tester to probe the wires feeding the taillights. Have a helper...
view full answer...

Recommended Trunk-Mounted Three-Bike Rack for 2003 Buick LeSabre
The trunk-mounted three-bike rack I recommend for your 2003 Buick LeSabre is the Thule Passage # TH911XT. It fits on your car with the use of six attachment straps, and features anti-sway cradles which are cushioned and prevent contact between bikes and between your bikes and the vehicle. The Passage also has arms which folds down for easy storage when you aren't using it, and has a total weight capacity of 105 lbs. When using a hanging rack like the Thule Passage, it's possible you'll...
view full answer...

How to Install the Hopkins Heavy-Duty ArcticGuard Snow and Ice Windshield Cover
Yes, the Hopkins Heavy-Duty ArcticGuard Snow and Ice Windshield Cover part # HM17529 will fit your 2005 Buick LeSabre and will do an excellent job of keeping the snow and ice off of your windshield. As you can see from the sample install video, the process is very simple. Just throw the cover over the windshield and secure it inside the vehicle using the included hooks. You can then tighten the cover with the straps for a better fit. The hardest part will be just throwing the cover over...
view full answer...

Replacement Axle for a 1994 Aliner Trailer
You can order axles to your specifications from a tractor or trailer supply store. Or you can try a Timbren Axle-less system. I have included a link to the Axle-less systems, which are like torsion axles, to the right. We do not carry any regular torsion axles. Please note that raising the height of a trailer will also raise its center of gravity making it more susceptible to sway.
view full answer...

Best Trailer Hitch Receiver for a 1999 Buick LeSabre
We currently only have one trailer hitch receiver for your 1999 Buick LeSabre which is the Draw-Tite Trailer Hitch Receiver part # 36216. This option will give you a Class II hitch with a 1-1/4" receiver tube opening. I have attached an installation video on a similar 1997 Buick LeSabre for you as well. If you can tell me what you will be using the hitch for I would be glad to offer some additional recommendations for you as well.
view full answer...

Plug and Play Trailer Wiring Harness for 2001 Buick LeSabre
There isn't a plug and play option available for the 2001 Buick LeSabre, most likely due to the age of the vehicle and the fact that it's not frequently used to tow. However, there is an available hardwire option that'll work great for you. You can use part # C59496, which would wire directly into the wiring harnesses that feed your taillights. The best place to tap into your taillight wiring is directly behind the taillight assemblies. Use the included tester to probe the wires feeding...
view full answer...