The Replacement Rubber Shim for TracRac TracONE Fixed Truck Bed Ladder Racks # TARX-11034-3 is a quantity of 1. This is a 16" long and 2-1/2" wide rubber shim that fits all TracRac TracONE systems. view full answer...
The Draw-Tite, part # 24792, is a 1-1/4 inch hitch opening. You will need draw bar part # 3593 and must only be used in the rise position on your CR-V. The draw bar has a 3/4 inch shank diameter so you could use part # 19256 as your ball. Using these parts, your maximum tongue weight is 200 pounds and maximum trailer weight is 2,000 pounds. If your CR-V has lower ratings, you must abide by those.
I have included a link to the instructions for the hitch and draw bar. view full answer...
The Replacement Hardware for Reese 16K Fifth Wheel Head Assembly and Head Support # 30583 kit Contains: 1 Cotter Pin, 2 Rubber Bumpers, 4 Locknuts 1/2"-13 , 4 Hex Bolt 1/2"-13 x 4-1/2" GR5, 2 Nuts 8-32, 4 Spring Clips, 2 Machine Screws 8-32 x 1" & 4 Pull Pins.
The rubber bumpers can be placed at different locations on Reese models. They are typically located in the rear most holes, since the head is tilted toward it when coupling and these prevent the head from contacting the hitch body. view full answer...
Yes, for the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05, these will be completely new cameras that you will install on your 2021 Rockwood 5th wheel trailer as opposed to simply mounting your current cameras into the markers. The Vision S requires minimal drilling and comes with complete mounting hardware for installation on your 5th wheel trailer. view full answer...
The Replacement Attachment Tab Assemblies for Blue Ox Baseplates - Short Front/Short Back, # BLU57XR comes in a quantity of 2 tabs with 2 spring pins. view full answer...
Aside from any additional wiring you may need to reach your power source (if there isn't one already near where the arms install), the Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759404 comes with everything you need to convert your A&E/Dometic manual awning to a power awning. view full answer...
The Roadmaster Direct-Connect Base Plate Kit part # RM-521424-5 which is for a 2002 Jeep Wrangler is a complete kit. It's not offered without the removable arms. The arms are actually not all the same so you'll need to make sure you use the set that came with the base plate kit only. This isn't something we do but rather all that's offered from the manufacturer.
If you're looking for a compatible tow bar, I recommend the Roadmaster Falcon All Terrain, Non-Binding Tow Bar part # RM-522... view full answer...
According to Hydrastar, their # HS481-8067 vented Electric Over Hydraulic Actuator system does indeed include a charger for the battery used by the break away system. The charger would connect to the 12-volt trailer connector feed from the tow vehicle.
Since your # 90885 Tekonsha Prodigy P2 brake controller is EOH actuator compatible, you won't need to use the adapter module that's included with the kit.
I've linked to the installation instructions as well as to a product description... view full answer...
The Replacement Step, Motor, and Control for Kwikee RV Electric Steps part # LC3747452 comes with the Replacement Control Unit for Kwikee Electric RV Steps part # LC379146. Therefore, you'd need to use the included control unit and not an existing. There is also the option of the Kwikee Electric RV Step Complete Assembly part # LC3747453 which is a complete unit that comes with step, motor, control unit, door magnet, and switch. view full answer...
Yes. The Taskmaster Arc modular wheel is the wheel used on the Provider ST225/75R15 Radial Trailer Tire w/ 15" Black Mod Wheel # TA37VR and it includes plastic valve stems.
In regards to balancing, tire and wheel combinations come with an effort made during installation to match the high and low sides for a rather rudimentary balancing. However, trailer tires don't necessarily need to be balanced since their primary function is to carry weight; since they're not used in steering as vehicle... view full answer...
Taskmaster tire and wheel combo # AM30620 does come mounted already. Trailer tire and wheel manufacturers do a type of balancing where they match the heavy sot in the tire with the light spot in the wheel. Trailer tires don't really need to be balanced beyond that but you could have them balanced further at a local tire shop.
The tire and wheel combos are ready to bolt onto a hub using lug nuts (not included). For a lug nut that you can use with tire and wheel combo # AM30620 use 1/2 inch... view full answer...
The Dexter E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 includes equalizers and hardware for both sides of a tandem axle system. I have attached a photo showing what is included in the kit.
If you have a triple axle set-up, you will want # K71-656-00 for a kit with 5-5/8 inch equalizers. view full answer...
The Optronics # MC66RB Trailer Clearance/Side Marker Light does indeed include bulbs.
Optronics also offers a similar LED lamp, part # MCL31RB. LED lamps draw a fraction of the power of incandescent bulbs, and will last considerably longer. view full answer...
The Bestop Supertop you mentioned, part # B5146415 is a confirmed fit for your 1982 FJ40 Land Cruiser. The package includes the top, the bows/supports, zip-out windows, all necessary hardware and a rear tailgate bar that allows easy access to the rear cargo area. Soft doors aren't included.
You might also consider Bestop's vinyl window cleaner, part # B11203 as glass window cleaner can cause the vinyl to scratch and yellow over time.
If you click the provided link, you can see everything... view full answer...
The Buffalo Tools Sportsman Series Generator # BTGEN4000LPC is designed for low pressure propane gas and comes with a low pressure regulator. view full answer...
Usually, trailer tires are not balanced with weights like car tires because if the trailer weight changes the change in weight can cause the weights to vibrate off. So what trailer tire and wheel manufacturers will do is line up the heavy spot in the wheel with the light spot on the tire to achieve some balancing.
We lack the equipment to balance tires here so if you want them to be balanced further you can have a local tire shop balance them for a nominal fee. view full answer...
The CIPA Dual-View Clip-On Towing Mirror that you referenced includes a single mirror.
To have mirrors for both sides of your vehicle you will want to order 2 of the # 11953 mirrors. view full answer...
So the reason the part # D15660 is the most expensive is because it comes with everything needed to install as a engine oil cooler kit since it has multiple fittings as well as the sandwich adapter. This is basically the complete kit.
Next up is the # D15960 which setup to be a transmission cooler and comes with the fittings needed for this application which is considerably less than as an engine oil cooler.
Finally the # D15860 comes with minimal fittings and adapters and would require... view full answer...