For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well.
We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer. view full answer...
For your 2006 Hummer H2 with factory roof rack you can use the Thule SUP Shuttle, # TH811XT, to carry your standup paddleboard. I have included a link to a video review for you.
This carrier has a 2 board maximum capacity and is rated for 110 pounds. It will accept a paddleboard up to 34 inches wide.
You could also use the Yakima SUPDawg, # Y04075, which can also hold up to 2 boards and has a 66 pound capacity. But, it can hold boards up to 36 inches wide. I have included a link to a... view full answer...
If you don't have tow bar lighting installed on your 2008 Hummer H2 yet you will need it as well since you don't have a way to activate the lights yet.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle... view full answer...
The Husky Liners mud flaps for your 2008 Hummer H2 part # HL57361 are square at the bottom like what the majority of the pictures show. The one picture that shows a flap installed on a vehicle is a typical photo and does not indicate the shape of them at all.
For a matching front pair you would want the part # HL56361. view full answer...
Either hitch pin hole of the B&W Tow and Stow Ball Mount part # BWTS10049B can be used in the hitch of your vehicle. Whichever one works for your towing application best will be perfectly fine. view full answer...
if the shape of the mirrors on your 2005 Hummer H2 are rectangular shaped and have a back that is mainly flat, and if the mirror glass is inset into the housing and has a lip that will allow the clips to attach to, the towing mirror I recommend is the K-Source Universal Towing Mirror, part # KS3891.
This mirror features a ratcheting system that creates a snug fit. It will fit mirrors that are 4-1/2 inches to 11-1/2 inches tall. Since these are sold individually, you would need to order... view full answer...
In order to tow your 2006 Hummer H2 using a tow bar, you will first need to install base plates. I recommend base plate kit # 2506-3. I did some research and found that the curb weight of your Hummer H2 is about 6,600 pounds. You will need a tow bar that can handle this much weight and is compatible with the MX style of base plates. I recommend the RoadMaster Blackhawk 2 All Terrain Tow Bar, # RM-422. This tow bar is capable of up to 10,000 pounds.
You will also need safety cables and... view full answer...
Starting with the brake controller itself I recommend the Tekonsha Prodigy P2 # 90885. This is an excellent proportional controller that features an easy-to-read digital display, continuous diagnostics that will alert you to any potential issues, and 3 boost level settings so you can fine tune the trailer braking. I have attached a short video demonstration on this unit that you can check out as well.
The 2008 Hummer H2 should have come equipped with a factory plug for a 7-Way connector.... view full answer...
I have the perfect solution for you!
The first thing you need to do is swap out your actuator and for that I recommend using the USA made HydraStar Electric Over Hydraulic Actuator for Drum Brakes # HBA-12 because this company makes very reliable equipment and they receive great reviews from our customers. From my information military trailers like your M105A use larger 1/4" brake lines so you should also need the Fitting # HS43-9035 to make this actuator compatible with your trailer brake... view full answer...
What you would want is the part # HM40975. This is a 7-way and 4-way that is confirmed to fit the round connector you have on your 2005 Hummer H2 and comes with a mounting bracket as well. view full answer...
The high beam and low beam headlights for your 2003 Hummer H2 are the same light bulb so they are dual filament. You can use # P239007NW which are DOT approved for on-road use. You can alternatively use # VX-H9007-R which are also dual filament. view full answer...
I have another option for you, but the TrailerMate Custom Wiring Adapter for Trailer Brake Controllers # TM75295 you were looking at is for 2013-2014 Ram 1500/2500/3500 trucks and did not replace the discontinued TM76284 for your 2006 Hummer H2.
Instead you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM # 3015-P which is confirmed to fir your 2006 Hummer H2, and will still work in Tekonsha, and Draw-Tite trailer brake controllers.
If you are also needing... view full answer...
I have another option for you, but the CIPA Custom Towing Mirror # CM11401 you were looking at was designed for select Ram trucks, and is not a confirmed fit for your 2006 Hummer H2.
Since there are no custom fit towing mirrors confirmed to fit your H2, I recommend the CIPA Universal Towing Mirrors # 7070-2 if you are looking for a pair of mirrors, or # 7070 if you are wanting a single mirror. I like these mirrors due to the textured rubber straps that hold the mirror secure to your factory... view full answer...
Yes, for your 2003 Hummer H2 with factory raised siderails the Surco Safari Rack 5.0 Rooftop Cargo # SPS4560-1101 has been confirmed as a fit. view full answer...
The most efficient transmission cooler we offer that is a Class IV would be the Derale 16-Row, High-Performance, Stacked-Plate Cooler # D51608. The dimensions of this cooler are 13 inches wide x 6-9/16 inches tall x 2 inches deep. You will need to measure the room you have in front of your radiator, but most likely this would work for you.
You will also need a few adapters. It is hard to say for certain what lines you do have, but you will need a Derale Snap-In Radiator Adapter Fitting... view full answer...
I do not recommend the use of the trailer hitch extender # he18 for use with a bike rack. Using a hitch extension reduces the the tongue weight capacity of the hitch by 50 percent. With a bike rack like the Yakima SwingDaddy and the rack loaded to its 120 pound capacity, the combined weight of the racks and bikes would be enough to exceed or come close to the maximum reduced tongue weight capacity. view full answer...
The Lippert 1621 and 1716 model pin boxes feature different enough mounting bolt patterns and designs that you won't be able to use your current Sidewinder (designed to replace the 1716) on your new trailer that is equipped with the Lippert 1621.
For your new trailer you can use the Reese Sidewinder # RP34FR or the Premium # RP61422 that features an enclosed air spring to absorb road shock and provide an extremely smooth ride. Both options have a 16,000 pound towing weight capacity and... view full answer...
Yes, if you have the Firestone Coil-Rite Air Helper Springs # F4108 kit in your 2003 Hummer H3 you would want a Replacement Air Spring # F6003. view full answer...
The Nighthawk tow bar part # RM-676 and the Invisibrake kit part # RM-8700 can be used to flat tow your 2008 Hummer H2 but you will need a new base plate kit which for that you'd want the part # 2506-3 and you'd be set. view full answer...
Yakima's spare tire carrier will accommodate tires up to 35 inches in diameter. According to my calculations, your tire comes in just under that at 34.36 inches.
The tire rack is pretty stout, I do not think stability will be a problem. As far as wind noise goes, the fairing included with the MegaWarrior Roof Basket will certainly lessen the wind noise. Mounting the tire as close to the rear of the basket as possible will help minimize wind noise as well.
Just make sure you do not exceed... view full answer...
Go To Results