Judging by the sticker on your bars it does look like those are the factory bars. The Aries Round Nerf Bars # AA204075-2 will fit on your 2007 Hummer H2 just fine in place of the OEM bars. If you'd rather have the black bars then you'd need part # AA204075 instead.
If you're looking for replacement hardware you'll need to get that from General Motors as hardware will need to be a direct replacement. Nerf bars can use specific hardware per each manufacturer which is why it needs to be a... view full answer...
The 24x60 etrailer Cargo Carrier # e98874- gives you 19-1/2 inches from hitch pin hole to carrier.
This is a folding carrier. However, you are not going to have enough clearance on your 2005 Hummer H2 to use the folding feature. The spare tire is going to get in the way. But the folding carriers give you more clearance than non-folding ones do so that's the benefit. This carrier is rated for 500 pounds and has a tilting feature. view full answer...
The Curt Trailer Hitch Mounted Spare Tire Carrier # c31006 will hold your spare provided that the trailer hitch on the front of your vehicle is also capable of supporting the combined weight of the spare and the carrier. A 36 inch tires with stock h2 rims will be fine.
Per Curt, the weight capacity of the carrier is whatever the tongue weight capacity of the trailer hitch is in this case. Included is a video resource to reference as well. view full answer...
You will be able to install the 20x60 Folding Cargo Carrier for 2 inch Trailer Hitches, item # C18151, in the receiver hitch of your 2006 Hummer H2 with no problems but you will need to measure to be sure the carrier will fold up once it is installed in the hitch.
Measure from the center of your hitch pin hole to the farthest back part of the Hummer, whether it be the bumper or a rear mounted spare tire. If this measurement is less than 6 inches then the cargo carrier will fold up without... view full answer...
The Flash E Series Adjustable 2-Ball Mount, part # FA42-00-2800 will work just fine with a 2x2 inch Class III receiver on your Hummer H2.
The Ball Mount has a 8000 lb capacity when used with the 2 inch ball, or 10,000 lbs when used with the 2-5/16 ball, although your maximum capacity will be limited by the manufacturers stated towing capacity. view full answer...
I checked with Timbren and they have confirmed that the Timbren Rear Suspension Enhancement System # TGMRH2 that you referenced is compatible with your 2005 Hummer H2 with auto-leveling air ride suspension.
I attached installation instructions and an FAQ on Timbrens for you to check out. view full answer...
They absolutely do! I verified for you that the Aries nerf bars do indeed fit your 2003 Hummer H2, and are available in both a black powder coat and polished stainless steel:
- Black Powder Coated Steel: Aries Round Nerf Bars # AA204075
- Polished Stainless Steel: Aries Round Nerf Bars # AA204075-2
These Aries nerf bars are a nice choice as they will do the job of making it easier to get in and out of your Hummer while also providing it with a unique, more rugged overall aesthetic. view full answer...
Yes, I was able to confirm through my contact at Kuat that the 7 inch long straps on the Kuat Grip Ski and Snowboard Carrier # GRR4B will provide enough length to fit around the 4 inch wide by 2-1/8 tall OEM roof crossbars of your 2003 Hummer H2. The straps will actually fit up to 4-1/4 wide by 2-1/2 tall crossbars, so you're good to go!
There is also a T-Channel Mount Kit # GRDMK available that lets you attach the Kuat Grip carrier using t-bolts on crossbars with t-channels as an alternative... view full answer...
The Timbren # TTRA1032 is a great help to a trailer. For your small trailer you will want the Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs # TTRA1702. It sounds like this is exactly what you are seeking. view full answer...
Firestone Level-Rite Air Helper Springs and Shock Absorber Kit F1003 does NOT fit your 2003 Hummer H2 but all suspension enhancement products for this vehicle can be seen on the linked page. The front axle kit we have comes from Timbren and it a set of rubber jounce springs designed to support your front suspension when it is under load, such as when using a snow plow on the vehicle, kit # TGMFK25S.
This no-drill kits includes rubber springs that provide progressive resistance when under... view full answer...
To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts:
- 60" JetStream Crossbars # Y00426
- SkyLine Towers # Y53TR
- Landing Pad 4 # Y00224
This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed.
The Pioneer Platform # RR85ZW... view full answer...
Yes, the Timbren kit part # TGMRH2 is a fit for your 2008 Hummer H2 with factory air suspension and will work well to give you more suspension support. view full answer...
So first, your 2004 Hummer H2 does have to be stock to use the Superchips Flashpaq F5 Performance Tuner - GM - Gas/Diesel # SU2845.
If yours isn't, you'll need to take it to a GM dealer to have them return it to stock. As for returns, once something is used, it cannot b returned. And insofar as if the # SU2845 will be beneficial to your '04 Hummer, yes, it absolutely will.
It has numerous tunes, including performance, that allow you to get the most out of your Hummer. view full answer...
To connect the Redarc Tow-Pro Elite item # RED63RR to your 2003 H2 you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # 3015-P.
This harness plugs directly into the Redarc wiring adapter that comes with item # RED63RR and also to the port underneath your Hummer H2's dash.
The port is only available on the H2 models with the factory 7-Way and without the factory tow package. view full answer...
Yes, the Tekonsha Wire Replacement for GM Vehicles, part # 3015-P,and the Tekonsha Prodigy P2 Proportional Brake Controller, will work on 2003-2007 Hummer H2, so it would work on your vehicle.
Even though the title says it will fit 2003-2006 GM vehicles there are a few 2007 GM vehicles, such as the Hummer H2 and the 2007 classic body style GM trucks, that it will work on.
I included a video below of the brake controller and wiring harness being installed on a similar 2007 vehicle as... view full answer...
If the hitch on your 2007 H2 is a 2-inch size then you can use an adapter/extender like the Curt Hitch Extender # C45796. However, you need to be aware that use of any extender will reduce your hitch's tongue weight and towing weight ratings by 50-percent.
This loss of hitch capacity results from the change in the geometry of the forces on the hitch. In the same way that slipping a length of pipe over a tire iron gives you more leverage to loosen a stubborn lug nut, using an extender... view full answer...
The 2005 Hummer H2 is related to the 2005 Chevy Tahoe and K Source mirrors # KS62075-76G do fit the Tahoe. But they are not a confirmed fit for the Hummer H2. None of the manufacturers we carry have a confirmed fit for the Hummer H2.
The safe bet is to use a universal towing mirror. I have included a link to the universal mirrors that we carry to the right. The most popular option is # KS3891. I have linked a video showing how the universal mirror installs. view full answer...
According to the Thule Fit Guide, the Thlue Flat Top Ski and Snowboard Carrier, part # TH7326 should fit just fine onto the factory cross bars. I have added a link to the installation instructions below. If your cross bars measure 2 inches by 4 inches, the THXADAPT7 bolt kit will probably be needed. view full answer...
We have not yet tested the Curt Roof Mounted Cargo Basket part # C18115-117 on a 2006 Hummer H2 with a factory roof rack therefore, in order to determine compatibility you would need to do a bit of measuring on your Hummer. For starters, the Curt cargo basket works with crossbars that are spaced between 22 and 50 inches apart on center and do not exceed 3" wide x 1-5/8" tall. Therefore, as long as the factory roof rack on your H2 fits these two criteria then it will work well for you. Unfortunately,... view full answer...
Go To Results