Nerf Bars for a 2007 Hummer H2

Question

Question:

My bars are not welded on they are drilled factory bars i think see pics

asked by: Ron B

0

Expert Reply:

Judging by the sticker on your bars it does look like those are the factory bars. The Aries Round Nerf Bars # AA204075-2 will fit on your 2007 Hummer H2 just fine in place of the OEM bars. If you'd rather have the black bars then you'd need part # AA204075 instead.

If you're looking for replacement hardware you'll need to get that from General Motors as hardware will need to be a direct replacement. Nerf bars can use specific hardware per each manufacturer which is why it needs to be a direct replacement.

expert reply by: Jon G

0

OEM Sticker on 2007 Hummer H2 Nerf Bars
(click to enlarge)

OEM Nerf Bars for 2007 Hummer H2
(click to enlarge)

Answer 1

For your 2007 Hummer H2 I recommend installing a set of nerf bars like the Aries Round Nerf Bars #AA204075. This is going to make getting in and out of your Hummer much easier for wife and will run the length of the cab so you'll have…

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 3

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Answer 5

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 6

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 7

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 8

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Nerf Bars for a 2007 Hummer H2

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching