The Class III # 75282 Draw-Tite Trailer Hitch that you are interested in does comes with the six bolts needed to secure the hitch to the existing weld nuts in the frame. All of our hitches are shipped with the necessary installation hardware.
If you click the provided link, you can view an install video. view full answer...
Replacement Wiring Harness # 118267 for your 2010 Nissan Frontier doesn't really have a gasket at the 7-Way lid. And for something to be considered waterproof it has to be able to be submerged under water for a certain amount of time and not let in any water. No trailer connector can make that claim! What I recommend to safeguard against corrosion from moisture is to use dielectric grease # LT37534 anywhere you have electrical connections.
The other option is to use a factory replacement... view full answer...
The Draw-Tite # 75282 does include all the necessary hardware and is confirmed to fit your 2016 Nissan Frontier. I've linked an install video for you.
If you're going to be towing a trailer you'll also need a ball mount, hitch ball, pin and clip, and trailer wiring.
A wiring harness that will fit your truck is # C56225. This will provide a 4-way trailer connector and installs by plugging in to a connector beneath the vehicle. Then connect the included jumper harness with relays into... view full answer...
The Draw-Tite # 75282, which is a confirmed fit for your 2018 Nissan Frontier, does not come with a bracket for a 7-way. What you want to use is Mounting Bracket and Installation Hardware # PK12711U; I've added links to a video review of this bracket as well as a link to a video of this hitch being installed on an '18 Frontier. view full answer...
No, the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10 Diameter - 5 on 4-1/2 Item # AKHD-545-35-EZ-K that you referenced comes as a single hub and drum assembly so you need to purchase 2 of them for each axle on your trailer.
Attached is an installation video that you can check out. view full answer...
Your Draw-Tite hitch # 75186 that fits your 1998 Nissan Frontier includes among its hardware items four fish wire tools, also called bolt leaders. These are supplied to make it easier to place the carriage bolts and bolt plates inside the frame rails on models with the 56-inch bed. They are typically not needed to install this hitch on the 75-inch bed model.
Page 2 of the linked instructions refers to these bolt leaders. view full answer...
Ordering the Wheel Masters Extendable Towing Mirror, part # WM6600 would provide you with one mirror. If you wanted one for the driver and one for the passenger side, you would need to order two of them. view full answer...
Yes, all of our hitches come with all the necessary mounting hardware. The drawbar, pin and clip and any accessories are sold separately.
I have linked instructions and a video installation of the Draw-Tite Trailer Hitch # 75282. view full answer...
The bolts that hold the head to the shank for the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0600 are 3/4-10 x 5” Grade 5 Bolts. If you're asking about the size of the hitch pin then that would be 5/8".
We do have the Replacement Hardware Kit # FA92-02-9600 which includes the hardware needed to connect the head to the shank, as well as a replacement hitch pin. view full answer...
I went to the warehouse to take a look at the Softride Tailgate Pad Bicycle Transporter # SR26461 and found it does not have a fleece underside. view full answer...
Just the round connector with the two harnesses coming out of it from the # HM43534 is not available. If you needed just that portion you'd still have to order the entire 7-way kit. view full answer...