The weight of the Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier # RRRMCB03 that you referenced is 48.5 lbs and would easily fit on the Rhino Rack roof rack you have installed on your 2016 Honda Fit part numbers # RRVA118B-2, # RRRLKVA, and # DK438 which has a weight capacity of 165 lbs. What you'll need to do is determine the weight capacity of your vehicle's roof and the weight of the bikes you plan to carry and be sure not to exceed the lowest rating between the roof rack and the... view full answer...
The best roof rack I can recommend for your 2019 Honda Fit is the Rhino Rack roof rack part numbers # RRVA118B-2, # RRRLKVA, and # DK438. I recommend this roof rack because it is easy to install, has aero shaped bars which will be very quiet, and has a much better price than the similar quality rack competitors available. I attached an install video for this rack on a similar 2016 Honda Fit for you to check out as well.
For a kayak carrier I then recommend the Yakima JayLow part # Y04073... view full answer...
We can get you set up with all the best parts to tow your jet ski with your 2019 Honda Fit so you can hit the water. Let's start with the trailer hitch and the best option in terms of quality and value is the Draw-Tite Trailer Hitch Receiver # 24920.
For wiring the best harness is the T-One Vehicle Wiring Harness # 118767 because we have found the Tekonsha brand to be the most reliable trailer wiring harnesses available. I highly recommend Dielectric Grease for Electrical Connectors #... view full answer...
I have a better solution for you, but yes the Curt hitch part #C11406 has been confirmed as a fit for your 2015 Honda Fit and would work with a Class I compatible bike rack.
Since Curt requires the use of a stabilizer strap with their hitches when used with a non-supported load like a bike rack a better solution would be the Draw Tite Hitch part# 24920 as it does not have the strap stipulation.
The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use,... view full answer...
Yes we do carry the Rhino Rack Vortex Roof Rack for your 2016 Honda Fit that has black bars with the part numbers # RRVA118B-2, # RRRLKVA, and # DK438. view full answer...
For your 2019 Honda Fit I recommend the Curt hitch part # C11406 over the Draw Tite # 24920 for a few reasons. The Curt has a shorter install time, is made in the USA, and according to our installers the Curt hitches have a bit tighter quality control so the hitch will most likely fit better than the Draw Tite.
I attached a picture of what the hitch looks like installed as well as a link to an install video for the hitch for you to check out as well. view full answer...
Consumers of aftermarket products are protected by the Federal Magnuson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question.
With a hitch on a Honda Fit you would not be able to carry 300 to 400 pounds. The hitches for the Fit are Class I hitches rated for a maximum of 200 pounds tongue... view full answer...
If you need to transport two pack-and-plays on your roof with dimensions of 13x13x33, I recommend the Yakima OffGrid Roof Cargo Basket - Steel - 75" Long x 49" Wide - 165 lbs # Y07139-09. The internal dimensions of the OffGrid are 68-3/4 inches long x (where curve starts) 42-3/4 inches wide x 5 inches deep. With these dimensions, you will be able to secure the pack-and-plays to the basket without any overhang as long as your vehicle can accommodate a bar spread of 50 inches. In order to... view full answer...
First thing you will need to carry kayaks on your 2012 Honda Fit is a roof rack. For that the Rhino Rack that consists of part numbers # RRVA126B-2, # RRRLKVA and # DK154 would be a great option.
J-carriers like the Thule Hull a Port part # TH834 would be a great option. You would need one carrier for each kayak. I attached a review video for this carrier for you to check out as well. view full answer...
Yes we have roof racks that fit your 2007 Honda Fit like the Inno Square Bar part numbers # INB127, # INSUT, and # INK219.
I also attached a link that has all of the roof racks we offer for your vehicle as well. view full answer...
The Rightline cargo bag # RL100S30 measures 48 inches long, 40 inches wide, and 19 inches tall. If the roof on your 2007 Honda Fit is large enough for these dimensions then you can use this bag.
For a smaller bag, 36 x 30 x 16, you can use # RL100S50.
For either bag I recommend using car clips # RL100600 so you will not have to route straps through the interior of the vehicle. I also recommend protective pad # RL100650 to not only protect the roof but to also prevent the bag from sliding... view full answer...
Roadmaster makes two different style of base plate kits that fit your 2019 Honda Fit. The crossbar style part # RM-521571-4 and the direct connect style part # RM-521571-5 that does not use a crossbar.
It's really a preference thing as they both work really well. The direct connect kit has one less thing to install when connecting since it does not require the crossbar and in general is a bit easier and simpler to use so it's what I prefer. The crossbar style is a style that Roadmaster... view full answer...
That would be dependent on the lock and hitch size, the etrailer Trailer Hitch Receiver Lock part # e98879 for 1-1/4" or part # e98880 for 2" which is what I recommend comes with two keys like most hitch pin locks. If you need extra keys we do offer a way to obtain them using the Replacement Keys for etrailer Hitch and Coupler Locks. That said, you'd need to order the lock first as you will need to know the key number to order more keys.
You can also just ask again when you know the part... view full answer...
The difference between the two Curt harnesses you mentioned is that the part # C59236 has a newer converter box which has a higher amperage rating than the older kit part # C56190KIT.
For that reason the part # C59236 would be the better option. view full answer...
The hitch I recommend for carrying a bike rack with your 2016 Honda Fit is the Draw Tite part # 24920 as unlike the Curt hitch for your vehicle # C11406 it does not require the use of a stabilizer strap when carrying a bike rack.
Carrying a bike rack in this hitch would not affect your transmission at all. This hitch also comes with everything you'd need to install too.
This would work well with a Thule bike rack like the Thule T2 part # TH23JV. view full answer...
All of the trailer hitches for the 2015 Honda Fit are Class I hitches which means they can only hold 2 bikes maximum. To carry 4 bikes you can use a combination of a hitch mount or trunk mount bike rack and a roof rack.
To limit the amount of parts needed and the cost I recommend using a combination of a trunk mount rack and roof rack. For a trunk mount rack that can hold up to 3 bikes the Yakima FullBack # Y02633 is a great option. I have linked a video review of this rack for you.
To... view full answer...
We have all the parts required for you to flat tow your 2020 Honda Fit, and I'll make a list like you were wanting to make it easy to order. What you need are the following:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521571-5
- Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar with LED Lights # RM-676
- Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
- Roadmaster FuseMaster Fuse Bypass # RM76511 and # RM76512
- Supplemental... view full answer...
First, for a trailer hitch, I recommend EcoHitch Trailer Hitch # 306-X7286 for your 2009 Honda Fit. This is a Class II trailer hitch with a 2-inch receiver.
The # TH9042PRO is my favorite hitch mounted bike carrier and you should not have any problems using it. I have linked a video review of this carrier for you.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005.... view full answer...
You would need to convert the 4-way # 119250KIT to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. view full answer...
Go To Results