The Gorilla-Lift Replacement Roller Assembly, part # GMNR925, consists of two each of the rollers, pins and clips along with four washers. The rollers themselves are machined from a high-density hard thermoplastic compound similar to nylon. The dimensions of the rollers and other parts are noted on the photo provided. view full answer...
While the MaxxFan vent assemblies # MA00-06401K and # MA00-07500K are not made in the USA, the Ventline and Fantastic Vent assemblies are.
The Fan-Tastic Roof Vent # FV802250 (manual lift) and # FV807350 (powered lift) are both 14 x 14 inches and tinted with a 12v fan, just like the two MaxxFan assemblies you referenced.
We also offer similar Ventline products, including the E-Z Lift Roof Vent # V3094-603-00 (manual) and # V2119-603-00 (powered). Both of these vent assemblies are also... view full answer...
The Adco All Climate Olefin RV Cover # AD97ZR, is Adco's top of the line storage cover. The top is constructed of Olefin making it one of the strongest top panels you will find on a cover. Along with the triple polypropylene sides water will bead on contact with the cover.
I recommend the Adco cover over the Classic Accessories Polypro Pro III, like # 052963731637, because of the Tyvek top. The Adco top is stronger and than the top on the Polypro Pro.
If you were looking at the review... view full answer...
The 30 amp SmartPlug RV and Marine Power Inlet and Connector, # SM67FR that you linked to is made from highly polished Marine-Grade 316 Stainless Steel. The electrical pins are nickel-plated brass for maximum conductivity with the internal electrics being fully encased in thermal epoxy. This makes them 100% weatherproof.
There is also a durable plastic option in three colors, # SM77FR for white, # SM27FR for black and # SM87FR for gray. All are Made in the USA. Please note the linked... view full answer...
The Titan Chain Alloy Snow Tire Chains # TC2219SCAM that you referenced are made of manganese nickel alloy which is incredibly strong. As long as you install these chains correctly, use them properly, and don't exceed their speed rating of 30 miles per hour you would not have to worry about them coming apart on you. We sell a lot of chains and haven't had any issues with these chains so I would recommend them for you.
I attached a review video for you to check out as well.
Lastly, you... view full answer...
The Erickson Lever Action Industrial Cargo Bar # 08907, you were looking at, is a galvanized steel bar with hard rubber composite material for the foot pad.
I have linked it to this page for your viewing and purchasing convenience. view full answer...
The Buyers Products Truck Bed Ladder Rack part # 3371501680 is made overseas but we do have made in USA options like the Thule TracRac TracONE Truck Bed Ladder Rack part # TH27000XTB which is what I recommend for an alternate. view full answer...
Replacement Velcro strip # A60270 does not have an adhesive back. It fits into a channel on the side rails on Access Tonnosport and Vanish tonneau covers. If you can tell me which tonneau cover model you have I can determine if we have the replacement Velcro or hook and loop strip for it. view full answer...
The upright steel portion of the guideposts on the CE Smith Post-Style Guide-Ons for Boat Trailers # CE27636 is only around 39 inches. The remaining height consists of just the outer layer PVC pipe that slides over the steel posts. With this in mind, you should be able to easily cut down the height on these guide-ons and just replace the top cap once the desired height is reached.
Just keep in mind that doing this will void the warranty of the product. view full answer...
The Titan Chain Alloy Snow Tire Chains # TC2321 are made in China. If you're looking for a USA made tire chain you could use something like the pewag Tire Chains # PWE2228S. However, you will need to make sure these work with your current tire size and check your owner's manual for any other restrictions. Unlike the Titan Chain tire chains these are not class S compatible. view full answer...
The Curt D-ring, # J-705, is raw steel. It is not zinc plated or galvanized. It is meant to be welded onto another steel surface. Welding zinc or galvanized steel does have challenges and can produce toxic fumes so going with a raw steel component is the way to avoid that. view full answer...
I would be happy to shed light on this for you; Bearing Kit # BK1-150 is manufactured by TruRyde. It contains inner and outer bearing L44649, inner and outer race L44610 as well as grease seal 10-60.
I've added links to a couple video reviews of this kit for you to take a look at. view full answer...
The Optronics LED Trailer License Plate Light with Bracket # LPL56CB uses 20 gauge wire. This thin wire is all that is needed to power the led light as it only draws 0.045 amps at 12.8 volts. view full answer...
The Curt # C31083 weighs 47 lbs; it's country of origin is the United States of America. The Draw-Tite # 65067 weighs in at 37 pounds and is not made in the USA.
Each of these hitches are confirmed fits for your 2016 Ford F-150, and each has a 2 inch receiver capable of being used with a snowplow, winch, or other accessory. I've also added a photo showing what the Curt receiver looks like on a Ford truck. view full answer...
STX is a appearance package which is an optional package on the Ford F-150. The STX is not a trim level, the STX can only be added to the XL trim level. According to my research the STX package started in 2003.
However, the K-Source Snap & Zap Custom Towing Mirrors # KS81800 are a confirmed fit for your 2006 Ford F-150. Snap these custom-fit towing mirrors over your vehicle's existing mirrors for an expanded field of vision. Built-in mounting clips grab the inside edges of your factory... view full answer...
The Lippert Components Standard Baggage Door Mounting Plate # LC227099 that you referenced is made of plastic. If you wanted a metal version you'd instead want the # 295-000016. view full answer...
The washer and nut included with the Brophy Hitch Ball, part # SC30-C are not stainless steel as the hitch ball is.
We do not offer a stainless hitch ball nut or washer. You may be able to find them at a local hardware store. The shank on this hitch ball is 1-inch diameter and the shank has fine threads(14 threads per inch). view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75506 which is a fit for a 2007 Ford F-150 is made in Mexico. If you are looking for a USA option, the Curt Trailer Hitch Receiver part # C13360 is the way to go. If you need a trailer connector to go along with the trailer hitch, the Curt T-Connector Vehicle Wiring Harness part # C56031 is plug-n-play. view full answer...
Go To Results