Replacement Hitch Pin and Lanyard for Yakima DoubleDown

Question

Question:

Im looking for a Yakima Doubledown 2 trailer hitch safety pin. Its a pin with a red knob and a metal leash that attaches to the bottom of the rack. Do you have that part? Thanks in advance,

asked by: Al M

0

Expert Reply:

Sounds like you are looking for the part # 889-0231 which is the replacement hitch pin and lanyard for the Yakima DoubleDown.

expert reply by: Jameson C

0

Answer 1

The correct replacement hitch pin for the Yakima DoubleDown Ace Bike Rack is the Replacement Hitch Pin for Yakima Hanging-Style Bike Carriers part #889-0231. Unfortunately, the design of the hitch pin is rather unique and specific to the actual rack…

view full answer...

Answer 2

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 3

If the Yakima RidgeBack Bike Rack was just purchased then most likely the wedge is not tightened correctly and you just need to redo that portion of the install process. However, if this is an older bike rack then most likely the cause of this is…

view full answer...

Answer 4

You can definitely make any modifications you'd like to your Yakima HoldUp EVO, part #Y02479. However, you should know that this will void your warranty, and so I cannot recommend it. If you choose to drill another hole and use the Replacement…

view full answer...

Answer 5

We offer replacement keys as well as locks and many other parts for bike racks like the Ridgeback 4 from Yakima, as well as racks from Thule and others. To choose the right key for your rack's lock you will need to remove the unlocked core from…

view full answer...

Answer 6

With the Yakima Supreme Getaway being discontinued in 2000, they could not confirm the fitment of the Replacement Hitch Pin for Yakima Hanging-Style Bike Carriers #889-0231. However, I did have one measured. It will have a diameter of 3/8 inches,…

view full answer...

Answer 7

If you look at page 3 of the attached installation instructions for the Yakima RidgeBack Bike Rack, part #Y02458, you can see a drawing that has a box with 1-1/4 inch in it. This bike rack is designed to fit a 1-1/4 inch hitch if it is a Class ll…

view full answer...

Answer 8

The correct replacement pin for a Yakima Ridgeback 4 is the part #889-0231.

view full answer...

Replacement Hitch Pin and Lanyard for Yakima DoubleDown

Product Page this Question was Asked From

Continue Researching