The shipping weight of the Draw-Tite # 36501 Class II hitch is 28 lbs which would be about 25 lbs minus the shipping packaging.
Purchase of the hitch includes all necessary installation hardware. The hitch uses four 1/2-13 x 1.75 grade 8 carriage bolts and four grade 8 1/2-13 hex nuts. You'll also need four .250 x 1.00 x 3.00 inch square hole spacers and four 1/2 inch conical toothed washers. The conical toothed washers and spacers are specialty hardware that you're unlikely to find locally.
You... view full answer...
You mentioned that you do not have a hitch, but there is a very good retractable trunk-mounted rack option for your 2010 Ford Escape Hybrid.
I recommend going with the Thule OutWay 3-Bike Rack, # TH56BV, which has anti-sway cradles that secure your bikes at three points, No-Sway cages which prevent the bikes from contacting each other or your Escape, and a weight capacity of 99 lbs. The OutWay also has 2 retractable cables to secure the rack to your car, with ratcheting knobs to adjust... view full answer...
Yes. The etrailer Trailer Hitch Receiver # E98866 does come with everything you would need to install it, from the mounting hardware down to detailed, step by step instructions. If you've got some basic hand tools, you can likely install this yourself by following along with the installation video I've linked to this answer. If you'd rather not, you should be able to have any local auto repair shop install this for a fee.
If you're going to be towing with this hitch you'll also need trailer... view full answer...
The Draw-Tite Class II Trailer Hitch, item # 36501, for the 2011 Ford Escape does not include the wiring harness for the vehicle.
For trailer lighting you will need the Tow Ready Custom Fit Vehicle Wiring, item # 118551, for your 2011 Ford Escape. I have posted installation instructions and an install video for you to review.
You may also want to consider the following items to complete your Class II towing setup.
Draw-Tite Ball Mount, item # 36051
Hitch Ball, item # 19258
Hitch Ball,... view full answer...
The Falcon tow bar, # RM-522, has a channel to run the safety cables through so you will want to use straight safety cables like the 64 inch Single Hook, Straight Safety Cables, # RM-645. Safety cables are not included and must be purchased separately.
We also have a towing combo kit, # RM-9243-1, that includes the safety cables and accessories needed for the RM-522 Falcon tow bar. Let me know if you need further assistance. view full answer...
The ceiling garnash won't include screws but there is an installation kit for trailer roof vents. The kit # 344270KITW includes sealant, Butyl tape, and all screws needed for installation. The sealant can be painted 72 hours after setup.
The types of screws included are sheet metal screws (30 count) and round-head wood screws (8 count).
Garnishes are only available in white. view full answer...
In terms of cost, the MagnaFlow systems are 100 percent stainless steel. High grade stainless steel cost more than lesser quality stainless steel used in systems like those you can get in auto parts stores. I had one of these systems installed on my 2006 Pontiac Grand Prix GXP and it was awesome. Plus the systems have a lifetime warranty, they are not going to rust out like factory systems would, and in my case they brought up the vehicle value a little. The slight boost in power and fuel... view full answer...
The K-Source Universal Towing Mirror part # KS3891 is only for one side of the vehicle, drivers or passengers. For the pair you would want part # KS3891-2 as this kit comes with two mirrors one for each side of the vehicle. view full answer...
The trailer suspension leaf springs that we carry, including # SP-178275 are sold individually. When replacing springs though you will always want to replace all of them at the same time.
This spring is rated for 750 pounds by itself. For a pair used on a single axle they are rated for 1,500 pounds. I have linked a video of this spring and a link to our help article on slipper spring suspension. view full answer...
Yes, the Curt Trailer Hitch Receiver, part # 12060, includes a ball mount, pin and clip.
If you need wiring and your 2008 Ford Escape came with a factory tow package, you will need Tow Package Wiring Harness, part # 118251. If your Escape did not come with a tow package, you will need T-One Vehicle Wiring Harness, part # 118551.
To complete your towing setup, you may be interested in the following items:
1-7/8 Inch Hitch Ball, part # 19256
2 Inch Hitch Ball, part # 19258
I have linked... view full answer...
Actually, the DC inflator is built into the AirBedz # 341030 mattress as shown in the video I've linked for you. The inflator is pulled out and recharged as shown at the 1:10 minute mark in the video. view full answer...
Yes. When you select a Replacement Hardware Kit # RHK it does come with all of the hardware needed-including the fish wire if those are required to install some of the bolts. It looks like the Curt # C13186 has 3 bolts that require fish-wire so that is included in the # RHK. view full answer...
The trailer wiring harness is not included with the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75782. This is because the hitch can be used on 2013 to 2016 Ford Escapes and the vehicles may have different requirements for wiring harnesses.
The trailer wiring harness I recommend for your 2016 Escape is part # 118566. Because your Escape has separate wiring (brake and turn signals are sent along separate wires. A powered converter module is required to safeguard the vehicle's wiring... view full answer...
The fuse that is included with the trailer wiring harness # 118426 is a 10 amp fuse. I have included a link to the installation instructions and a video showing a typical installation for you. I have also included a link to an FAQ article with tips on routing the power wire to the vehicle battery. view full answer...
According to the installation instructions for the Curt Trailer Hitch Receiver # C13186 there are six 7/16" fishwires included to help get the bolts in place to mount the hitch. I've attached a short video below that will walk you through the installation. view full answer...
The etrailer Trailer Hitch # e89YR that fits your 2022 Ford Escape does come with fish wire, as well as all other hardware needed for installation including the instructions. view full answer...
Go To Results