According to Thule, there are some Sonic models that will fit the factory roof rack of your Buick Enclave without interfering with the full operation of the rear hatch. The Sonic Large, part # TH636 is a confirmed fit for your 2009 Buick Enclave.
Thule states that the longer, larger-capacity 22 cubic foot XXL Sonic models would extend to the rear far enough to interfere with the full opening of the rear hatch, although you will be able to open it partially. view full answer...
Yes, the Thule Passage 3, # TH911XT, is listed as a fit for your 2008 Buick Enclave. I have included a link to a video review of this rack for you.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical mens bike would) then I recommend using bike adapter bar # TH982XT. This will allow you to carry those bikes more level and will provide better ground clearance. I have to use these adapters and without them my wifes bike would be at... view full answer...
The Thule Rapid Podium Feet # TH460R are designed for fixed points on existing roof rails. It seems that the 2018 Buick Enclave doesn't have raised side rails. If your Buick does, we need to check and see if there is any fixed mounting points on the rails. If that is the case, I will find the system that will work with your Buick.
Until then, you can watch the installation video I've included! view full answer...
The Thule Motion 22 Rooftop Cargo Box, # TH629906, will fit the factory roof rack on your 2008 Buick Enclave. However, you will not be able to open the rear hatch all of the way without interfering with the box. The largest box that you can use would be the Motion 18 box, # TH629806.
The 18 cubic foot size Thule boxes will fit the factory roof rack AND will not interfere with the hatch. At only 5 cubic feet of space less than the 22 sizes this is a great option and you will save a few bucks. view full answer...
The correct Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers for a 2022 Thor Odyssey Entegra on Ford E-450 Chassis is part # 3034-P which will allow you to install any Tekonsha, Reese, or Draw-Tite electric trailer brake controller like the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. view full answer...
As long as your crossbar spread (center to center front to back distance between front and rear crossbar) can be adjusted to between 24 inches and 42 inches apart, the Yakima SkyBox 18 Rooftop Cargo Box # Y07336 will work great for you. The box will be compatible with the OEM crossbars on your 2017 Buick Enclave. This is a really nice cargo box.
You might also be interested in a Rightline door step, part # RL100660 that would install in the strikers of your car door to provide a safe... view full answer...
You are on the money with the parts you mentioned as each will fit your 2018 Buick Enclave, the trailer hitch and cargo carrier will work with your Enclave, and the lighting kit is also a fit for the cargo carrier. You will also need a hitch pin and clip or hitch lock for the cargo carrier, and you may need is a 4-flat wiring harness for the light kit if your Enclave does not have one.
To make it easy, here is a list of the parts for you:
- Curt Trailer Hitch Receiver # CU29FR
- Curt... view full answer...
The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier # TH665C that you referenced should work very well on your 2012 Buick Enclave as long as you have a hitch installed on your vehicle.
If you do not have a hitch I would recommend you go with a Draw-Tite Trailer Hitch # 75528. This is a Class III hitch with a 2 inch opening that would work very well for you. We found then when this hitch is installed there is a distance of 5 inches from the center of the hitch pin out to the... view full answer...
The Rhino-Rack 2500 Roof Rack is compatible with the 2009 Buick Enclave CX as long as it has the the flush mounted roof rails that run front to back. Roof rack manufacturers do not test their products on every trim package of every vehicle, but they will list requirements that the vehicle must have for their roof rack to fit, such as the flush mounted side rails on your Enclave.
For a complete roof rack, you will want the following parts:
54" Crossbars # RRVA137B-2
Leg Kit # RRRLKVA
Custom... view full answer...
When folded, this carrier #e98874 has a distance of 9-1/2 inches from the hitch pin hole to the closest portion of the carrier.
To determine if it will work with your hitch, you will need to measure the distance from the hitch pin hole in the receiver on your hitch to the furthest point of the rear bumper. If this distance is less than 5 inches, the carrier will fold. In fact, I would probably want to allow at least 3/4 of an inch for safety. view full answer...
Yes, the Thule OutWay 3 Bike Carrier # TH56BV is confirmed by Thule to fit your 2010 Buick Enclave.
If you will be carrying women's, children's, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT, for greater ground clearance and to carry the bike more level. I have linked a video of the adapter as well. view full answer...
I have a solution for you, but the Carpod Walled Cargo Carrier # M2200-01-02 does not extend far enough out from the trailer hitch to fit well on your 2011 Buick Enclave. The trailer hitches we've installed on the Enclave required 5 inches of distance between the center of the hitch pin hole and the closest part of the carrier in order to clear the bumper. The # M2200-01-02 offers only 4 inches, meaning it would not work on your vehicle.
Instead, the Carpod Walled, Folding Cargo Carrier... view full answer...
The K-Source Replacement Side Mirror part # KS62108G for driver or part # KS62107G for passenger is a fit for a 2016 Buick Enclave will retain the following features: power remote capability, heated glass, and turn signal. If you have any other factory built-in mirror features these will be lost. We do not have any replacement side mirrors with built-in puddle lamps unfortunately. view full answer...
Yes, you can use a 4-diode tow bar wiring kit such as # 38955 on your 2016 Buick Enclave. It also appears that fuses have to be pulled to flat tow your Enclave. Consult the vehicle owner's manual to confirm. To make this process as easy as flipping a switch I recommend fuse bypasses # RM-76517 and # RM76514. view full answer...
Yes, I checked with Yakima and the RocketBox Pro 14 cargo box # Y07192 will fit the factory roof rack on your 2011 Buick Enclave. TO determine if there will be any rear hatch interference you will need to take a measurement on the vehicle. Measure from the center of the front crossbar all the way back to the gap between the roof and the hatch. If that measurement is greater than 44-1/2 inches then there will not be rear hatch interference. I have linked a video review of the cargo box for you. view full answer...
The Thule Passage trunk mount bike rack will fit both your 2010 Buick Enclave and 2012 Chevy Impala. I have included a link to a video review of the rack for you.
You might not have to use an adapter bar, # TH982XT, for a girls bike unless it has a step through frame that drops low down to the pedal hub. Or if you do not mind having the bike not level. I do recommend the adapter bar because it will allow you to carry the bike more level which will provide better ground clearance. I have... view full answer...
The SportRack Vista XL Cargo Box # SR7018 will work with a crossbar spread of 25-7/8, 27-7/8, and 29-7/8 inches.
You can measure the center to center measurement of your crossbars to make sure it has the correct spread to work with the roof box. If the crossbars can be moved on your 2014 Enclave, you may be able to adjust them to match one of the mentioned measurements. view full answer...
The 30x50 Flint Hill Goods Cargo Carrier w/ 48" Ramp # FHG77ZR will fit on your 2016 Buick Enclave. The measurement between the center of the pinhole to the closest part of the Flint Hill Goods carrier is 14 inches. However, you probably will not be able to use it in the folded position. If you are using a compatible hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 or the Curt Trailer Hitch Receiver # 13424, you need at least 5 inches from the center pinhole of the shaft... view full answer...
Yes, the 7-Way Round RV Style Trailer Connector - Trailer Side # A7WCB will match and plug into the 7-way on your 2020 Buick Enclave. view full answer...
The Husky Liners Universal-Fit Mudflaps, part # HL56261, are intended for either front or rear wheel applications. As a universal-fit product their installation and exact fit will vary by year, make and model of vehicle. Please note that this part consists of two flaps, so if you wish to install them on both front and rear wheels you will need 2 sets.
Tools required for installation include a drill (with 1/8- and 1/4-inch bits), center punch, hammer, short Phillips screwdriver and grease... view full answer...
Go To Results