Is the Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR Compatible with a 2016 Buick Enclave?
Question:
I have a 2016 Buick Enclave, Will the Flint Hill Goods 30x50 Wheelchair Carrier w/ 48inch Long Ramp - 2inch Hitches - 500 lbs # FHG77ZR fit on this SUV and will the CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On - 2inch x 6foot - 1,167 lbs - Qty 2 # IMF18800 bolt on to this carrier? Thanks for your help
asked by: Michael D
Expert Reply:
The 30x50 Flint Hill Goods Cargo Carrier w/ 48" Ramp # FHG77ZR will fit on your 2016 Buick Enclave. The measurement between the center of the pinhole to the closest part of the Flint Hill Goods carrier is 14 inches. However, you probably will not be able to use it in the folded position. If you are using a compatible hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 or the Curt Trailer Hitch Receiver # 13424, you need at least 5 inches from the center pinhole of the shaft to the closest part of your carrier. The Flint Hill Goods Carrier has only 4-3/4 inches for that length.
As far as the CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On # IMF18800, the straps will be able to bolt onto the Flint Hill Goods carrier. Drilling is required.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
CargoBuckle G3 Retractable Ratchet Tie-Down Straps - Bolt On - 2" x 6' - 1,167 lbs - Qty 2
- Ratchet Straps
- Trailer
- Truck Bed
- S-Hooks
- 2 Straps
- Retractable
- 6 - 10 Feet Long
- 1-1/8 - 2 Inch Wide
- 2001 - 3500 lbs
- CargoBuckle
more information >
Product Page this Question was Asked From
Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch
- Hitch Cargo Carrier
- Carrier with Ramp
- Wheelchair Carrier
- Folding Carrier
- 30 Inch Wide
- Heavy Duty
- Fits 2 Inch Hitch
- 50 Inch Long
- Steel
- Flint Hill Goods
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How Much Does The Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 60" Ramp # FHG99ZR Weigh?
- Q&A: Flint Hill Goods 30" x 50" Wheelchair Carrier - What Size Is The Main Bolt For The Shank?
- Q&A: Trailer Hitch for a 2005 Freightliner MT45
- Q&A: Why is the Flint Hill Goods 30x50 Wheelchair Carrier Not RV Approved
- Q&A: Trailer Hitch Recommendation for a P30 Service Body Truck
- Q&A: Why is There So Much Play On The Ball in My Adjustable Coupler?
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Carry Bikes While Towing a Travel Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Hitch Receiver Sizes
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Best Air Bag Suspension (2023)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)