I have linked a video showing installation of Draw-Tite Max-Frame Trailer Hitch # 75528 on a 2010 Enclave; at the 3:30 mark there is a display of the receiver tube's height above ground when installed.
On this vehicle the top of the receiver tube will be approximately 17-3/4-inches above ground. The exact height will depend on the tire's tread depth and the cargo and passenger load in the vehicle.
If you need a 4-pole trailer wiring harness you can use # C56245 from Curt. view full answer...
The Sliding Storage Drawer for Malone MegaSport Kayak Trailer - 5.5 cu ft # MPG537 is made of molded plastic for durability and comes with stainless steel hardware, coated steel rollers, and sealed bearings. The overall dimensions are 48 inches long, 20 inches wide, and 10 inches tall. view full answer...
Yes, you can! To add a roof rack to the flush mount rails on your 2024 Buick Enclave, I recommend the roof rack by Yakima which includes the following parts:
Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
This aero bar roof rack system has a 165 lbs capacity and it does not extend past your roof rails. I have attached a couple of pictures below so you can have... view full answer...
Congrats on the new vehicle! The best hitch for a 2024 Buick Enclave is the Curt item # CU29FR. This hitch is custom fit and bolts to your Enclave with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight.
I really like the Curt hitch item # CU29FR because it installs behind your rear bumper cover and can be completely hidden when you are not towing.
I have attached a couple of pictures below along with... view full answer...
I went out to our warehouse to take a couple measurements on the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 that you referenced.
I measured a distance between the bolt holes on the left and right side brackets to be right at 43-1/4 inches, on center. The distance between the two bolt holes on the bracket is 2-1/4 inches, on center. I have attached an image with these dimensions labeled that you can also check out.
This Class III hitch is confirmed to fit the following vehicles:
2007... view full answer...
The CTEK MULTI US 7002 12-Volt Universal Battery Charger # CTEK56353 features two mounting holes placed at opposite corners of the charger. The distance between the two holes on center is right at 7-1/2 inches and the holes themselves are pretty small, with just a 0.157 inch diameter.
This is a really nice battery charger that features an 8-step system that constantly monitors and maintains the 12V battery charge. It is easy to use with its quick-disconnect system and the charger itself... view full answer...
The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30590 that you referenced has a total weight of just about 18 pounds. The Kenda tire by itself weighs 8 pounds and the galvanized steel wheel is 10 pounds. view full answer...
The Thule Motion XT Rooftop Cargo Box # TH629706 will fit your factory bars on your 2015 Buick Enclave if the width of the crossbars is under 3-1/2 inches and the height is less than 1-11/16 inches. Also, in order for you to open the rear hatch on your vehicle, there needs to be at least 47-1/2 inches between the center of the front crossbar and the line where the trunk and hatch meet. In order to ensure a fit, I recommend measuring the dimensions of your crossbars and the distance between... view full answer...
To add a set of crossbars to the flush rails on your 2024 Buick Enclave, I recommend the roof rack by Yakima which includes the following parts:
Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
This aero bar roof rack system has a 165 lbs capacity. It attaches directly to your flush rails without drilling. The 45-1/2" long x 5" wide x 3-1/2" tall and the 41-1/2"... view full answer...
The length of the arms on the Curt Premium 4 Bike Rack part # C18064 is 27-1/2" and the length of the arms on the Curt Premium 5 Bike Rack part # C18065 is 34-1/2. view full answer...
According to the online information I found for your 2011 Buick Enclave CXL with front-wheel-drive, the vehicle is rated for a maximum trailer weight of 2000-lbs unless it is equipped with the trailer towing package, in which case its towing capacity increases to 4500-lbs.
Both of the 2-inch hitches we offer for your Enclave have a 5000-lb towing capacity but since the vehicle is rated lower, that lower vehicle towing capacity becomes your actual working limit. The hitch I recommend is... view full answer...
The 150 pound capacity of the Swagman Roamer roof rack # S80510 is the capacity for the whole system assuming the weight is evenly distributed. You will also want to check the capacity of the roof. Whichever is lower, the roof or the roof rack, is the capacity you will need to go by. view full answer...
Yes, there is. You will need two separate wiring harness though since your 2011 Enclave does not have the towing package. The first one is the Curt Wiring Harness item # C56027. This harness is custom fit and plugs into existing wiring which is located either behind the driver's-side and passenger's-side tail lights or behind the rear bumper.
The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and... view full answer...
The Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Steel - 14" Wheels # HP54VR measures 7-3/4" at the top and then 9" at the bottom (see attached).
Our video team member goes over this as well in the linked review video. view full answer...
I sure the wiring harness is there and I get your frustration because even our installers have mentioned how difficult it is to find it. I have linked a video below for the item # 118270 4-way wiring harness. It uses the same connector as the item # 118271 you are looking to install in your Enclave. If you skip forward to the 1:35 point of the video you'll see the step.
If your 2017 Buick Enclave does not have the towing package you will still have the rectangle connector needed to attach... view full answer...
To install a hitch behind the bumper panel on a 2024 Buick Enclave, I recommend the etrailer Hitch item # e56YR. This hitch is custom fit and bolts to your Enclave with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight.
I have attached a couple of pictures below along with an installation video to help you get this hitch set up and show you what it looks like once installed.
If you are planning on towing... view full answer...
Go To Results