Expert Answers about Mini Cooper

• What Is The Color Code Of The Roadmaster Flexo-Coil Wiring Kit?
• The video you watched for the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 was installed on a 2016 Mini Cooper, and the missing colors are likely due from a harness change from 2013-2016, which isn't all that uncommon. Instead, you're going to need to test your vehicle's harness with a circuit tester # PTW2993 for functionality and match the wires to the wire harness based on functionality. The wire code for # RM-15267 is as follows: -Green = Right Turn. -Red...
  view full answer...


• Can the Custer LED Amber Quad Flash Kit # CPL65A-STR be Surface Mounted
• The Custer LED Amber Quad Flash Kit, # CPL65A-STR, was not designed to be surface mounted. The sockets for the plug-in wiring harnesses protrude past the back of the light so they would not sit flat. The only surface mount flashing amber lights that we offer are magnetic lights like the Custer Adjustable Amber LED Emergency Light, # HF18A-MB. I have attached a link to all of our flashing warning lights for you to check out.
  view full answer...


• Difficulty of Hitch Installation on 2010 Mini Cooper S
• The light-duty Class I hitch we offer for the 2010 Mini Cooper S, Curt hitch # C11130, installs without drilling but will require heat shield modification (if it has a center exhaust) and will also require you to trim the rear valance. You will need to temporarily remove the bumper to provide access to the hitch mounting points. This Curt hitch comes complete with all installation hardware and the linked installation instructions detail the tools required, which include a torque wrench....
  view full answer...


• Should Install Bolts of the Swagman XTC2 Be Difficult to Thread In
• The screws on the XTC2 on the bottom of the rack should not be so difficult to thread in that it feels like you are tearing something up. Hopefully it's not too late, but you don't want to crossthread those bolts so back them off and try lining up the rack and screws better so that everything threads easier. Customers of ours have said that having a second set of hands can help greatly to stabilize the rack while the bolts are being threaded in.
  view full answer...


• How To Operate the Tail Lights of a 2008 Mini Cooper while Being Flat Towed Behind an RV
• For activating the tail lights of your 2008 Mini Cooper with your RV while the Mini is being flat-towed you will want to check out the FAQs I attached that detail how this is done. The process and installation will be the exact same as what you would need to do to install a diode kit on your vehicle. Basically, you will use a set of diodes installed in your vehicle to operate the tail lights of you vehicle with the tow bar wiring from your RV. This will not affect the functioning of your...
  view full answer...


• Installing the Curt Trailer Hitch Receiver # C11272 on a 2012 Mini Cooper Baker Street Edition
• The Curt Trailer Hitch Receiver # C11272 that you referenced is confirmed to fit your 2012 Mini Cooper Baker Street Edition. You will remove the rear bumper for the installation but you will not have to leave the backup light in your picture hanging. There is a small hole that you will need to cut in the fascia that is below your bumper though. I have attached a picture pointing out the estimated location. You will need to follow the instructions for that exact location. Keep in mind that...
  view full answer...


• Installing Safety Chains On Curt Trailer Hitch #11130 For 2007 Mini Cooper S
• There are 2 metal rings welded to the Curt Trailer Hitch, part # 11130, on each side of the receiver to attach safety chains. You will have to reach up behind the bumper fascia to connect the safety chains. For safety chains, we have 48 Inch Long Safety Chain, part # 2114-553-04. For quick links to attach the chains, we have the Safety Chain Quick Link, part # C82932. Instructions and a video installation of the Curt Trailer Hitch # 11130 are linked.
  view full answer...


• Can I Retain Spare Tire on 2013 Mini Cooper Coupe with Curt Trailer Hitch
• I spoke with my contact at Curt and he said Curt trailer hitch, part # C11272, will allow you to retain your spare tire under your 2013 Mini Cooper Couple with single exhaust. The spare can be removed with the hitch in place. Curt does require the use of Support Straps, # 18050, for all non-trailer loads including bike racks, cargo carriers and so forth. Failure to properly support these loads will void your hitch warranty from Curt. If you plan to do some light towing you may also be...
  view full answer...


• How the Curt Trailer Hitch Installs on a 2006 Mini Cooper and is Any Trimming or Cutting Needed
• The CURT Trailer Hitch, # 11126, will fit all model Mini Coopers EXCEPT the S series. You will not have to cut or trim any visible part of the bumper. The hitch will fit, more or less, around the stock parts on your 2006 Mini Cooper, but you may need to trim a small portion of the opening at the back of the vehicle for the fascia to fit back on the vehicle correctly once the hitch is installed, see instructions link. There are several specific steps that need to be taken to complete installation,...
  view full answer...


• Is Adapter Needed to Install Thule AeroBlade Roof Rack on 2019 Mini Cooper
• I have good news for you - the Thule Short-Roof Adapter Kit for Traverse Roof-Rack Feet TH487 is NOT needed for you to install the Thule Roof Rack on your 2019 Mini Cooper hardtop with four doors. You have made a great choice with this roof rack as it is the one I would strongly recommend for your '19 Mini because of its combination of function, durability and style. The rack that fits your '19 Mini Cooper is made up of the following parts: - Thule WingBar Evo Crossbars # TH711220 (Black)...
  view full answer...


• Wiring Instructions for a 2005 Mini Cooper S Convertible
• You will need to hard wire your Mini Cooper S Convertible for trailer wiring. The Upgraded Circuit Protected Taillight Converter Hardwire Kit with 4 Pole End (Includes Testers), item # 119178KIT, is the correct wiring harness for your vehicle. You will need to access the tail light wiring behind the tail lights and use the included circuit tester to identify the left turn, right turn, stop and tail light wires. Once these wires are identified you will splice the yellow wire to the left...
  view full answer...


• Instruction Detail on the Roadmaster EZ2 Base Plates for a 2014 Mini Cooper
• The Roadmaster EZ2 base Plate Kit, # 521879-1A, are designed exclusively for the 2011-2014 Mini Cooper. The instructions for the base plates will show installation on a Mini that fall in between 2011-2014. The instructions go step-by-step and include pictures for the installer to reference during installation. If you look toward the bottom of this page there is a link for the installation instructions that you can review.
  view full answer...


• Does the Rear Bumper Have to be Removed When Installing a Hitch on a 2010 Mini Cooper
• Yes. When installing any of the available hitches, for your 2010 Mini Cooper, including the Curt Trailer Hitch, # C11160, you will need to temporarily remove the rear bumper. With the Curt hitch, you will also need to trim or modify the heat shield for installation. This hitch fits Mini Coopers with Single Exhaust except S and Works models. I have included a link to the instructions below. For wiring, I recommend the Curt Wiring, # C59236. This wiring harness is designed for your Mini...
  view full answer...


• How to Determine the Tail Light Wire Functions on a 2006 Mini Cooper S Convertible
• In order to determine the wiring functions behind the taillights of your 2006 Mini Cooper you will need to use a circuit tester like # PTW2993 if needed. You will have someone sit in the vehicle and run through the turn signal, brake, and running light functions while you test the wires. I know that on a 2005 model the wires are purple for running lights, black with green tracer is brake lights, and blue with green tracer for left turn signal. On the passenger side the blue with tan tracer...
  view full answer...


• Replacement for Pollak PA66-MD40 Connector
• Are you certain it is a Pollak PA66-ND40 as opposed to a Pollak PA66-MD40? The only reason I ask is we do have a replacement for the MD40, which is the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket # PK11893-11933 which we know has been a replacement for Sprinter RVs. I have been unable to find any type of reference to a ND40 connector.
  view full answer...


• Tow Dolly For 2004 Mini Cooper With Front Wheel Drive
• According to page 129 of the online owner's manual I looked up for a 2004 Mini Cooper, if it has front wheel drive, it cannot be flat towed as it will damage the transmission, so you will need a tow dolly. The best option for that is from Roadmaster: - Roadmaster Tow Dolly with Electric Brakes # RM-2050-1 The Roadmaster dolly will allow you to tow your Mini and is the best option because it allows for the tightest maneuverability for a dolly, and because its electric brakes give you complete...
  view full answer...


• Testing Flat Towing Diode Kit on 2006 Mini Cooper
• In a flat towing diode wiring setup such as with Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247 you can test the functionality of the installation on the toad by applying 12V power from a spare battery or even from the Mini's battery. You'll want to confirm which pin on the vehicle connector is grounded, either to the battery negative terminal or to a chassis ground. This should be the wire with the ring terminal. Then one at a time apply +12V power to the other pins...
  view full answer...


• What Is the Minimum Deck Height of the Gen-Y Hitch Aluminum Loading Ramp Set
• The minimum deck height for the Gen-Y Hitch Aluminum Loading Ramp Set part # GH54FR is 15". If they were used at a lower deck height the start of the ramp would not sit flush to the ground and it would have an upward pitch. This may or may not be an issue depending on the ground clearance of the item. I have attached a list of our other ramp options below.
  view full answer...


• Installation Instructions for 2015 Mini Cooper Curt Trailer Hitch
• If you check out the link I attached you will see install instructions for the Curt Hitch part # C11417 which has been confirmed as a fit for your 2015 Mini Cooper. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
  view full answer...


• Does Grille Need to be Trimmed to Mount Base Plate in 2008 Mini Cooper S Hardtop
• While it doesn't need to be drilled, the lower front grille of your 2008 Mini Cooper S Hardtop does need to be trimmed in order to install the base plates that fit (unless you have the Sport suspension), which are the following part number: - Roadmaster EZ Base Plate Kit # 521877-1 This is necessary in order to allow the arms to protrude so the tow bar has a place to attach. Along with the base plates, the rest of the flat tow set up for your '08 Mini Cooper S Hardtop consists of the...
  view full answer...