Expert Answers about Chevrolet Cavalier

What Size Drill Bit is Needed to Install Class I Curt Hitch on a 2004 Chevy Cavalier
Curt recommends using a 7/16" drill bit to install the Class I Hitch Receiver # C11109 on your 2004 Chevy Cavalier. The hardware used to secure the hitch in those locations will be 7/16-14 bolts that are provided as part of the installation hardware with the hitch. Attached is an installation video of this hitch on a 2003 Cavalier for you to check out. If you let me know what you plan on using the hitch for I'd be more than happy to make any additional recommendations that may be necessary.
view full answer...

SportRack Roof Rack Recommendation for a 2005 Chevy Cavalier 4-Door
I checked with SportRack and the SportRack Frontier Semi-Custom Roof Rack for Naked Roofs # SR1005 that you referenced is confirmed to fit the 4-door Chevy Cavaliers like yours. This rack attaches to the door jambs of your vehicle so it does not matter if you do not have a rain gutter.
view full answer...

How to Get the CIPA Replacement Mirrors # CM27339 in Red
We don't offer the CIPA Replacement Mirrors # CM27339 in red, but if you took the mirror to a body shop they could easily paint it to match the red of your vehicle.
view full answer...

Recommended Roof Rack for 2000 Chevrolet Cavalier
The SportRack system, # SR1005, which you reference, is designed to fit your 2000 Chevrolet Cavalier. This is an economically priced, removable roof rack that clamps to your Cavalier's naked roof. I have included a video review of this roof rack system for you to check out. To carry your snowboards on the roof rack you will want the Thule Carrier for 4 Snowboards, # TH7325. The carrier attaches with universal mounting hardware to accommodate your crossbars and it has heavy-duty locks that...
view full answer...

Hitch Recommendation for a 1998 Chevy Cavalier Z24 Convertible
We do not currently(October 2023) have a hitch that will fit your 1998 Chevy Cavalier Z24 convertible. If you are wanting a hitch for a bike rack, you can use a trunk mounted bike rack like the Malone Runway Trunk Bike Rack for 2 Bikes - Adjustable Arms # MAL84RR. I attached a review video for you to check out.
view full answer...

Will I Have to Drill into the Frame of My 2003 Chevy Cavalier to Install Curt Hitch # C11109
In order to install this Curt Trailer Hitch # C11109 on your 2003 Chevy Cavalier, you will only need to use a drill to enlarge some existing holes. You will have to temporarily lower your exhaust, but the exhaust will be reinstalled when the installation is complete. You will also need to trim the heat shield. I attached the instructions in a link below for you to check out also. You may also be interested in purchasing the following: Sportframe Drawbar 2-1/8 inch Rise or 2-3/4 inch...
view full answer...

Could a 1999 Chevy Cavalier Carry 2 Ladders on the Roof with a Roof Rack
The Sportrack ladder rack part # SR1005 is a semi-custom roof rack confirmed as a fit for your 1999 Chevy Cavalier that has the potential to carry a couple of ladders as long as the weight of the two is less than what the owners manual of your vehicle states is the roof capacity. For straps to secure the ladder to the rack you could use the part # RTD3 which comes with two straps.
view full answer...

Parts Needed to Flat Tow a 2004 Chevy Cavalier
Yes, as long as you have a Roadmaster XL Base Plate Kit # 3116-1 then you could flat tow your 2004 Chevy Cavalier with a RoadMaster Tracker Tow Bar # RM-020. To complete your towing setup you may also need the following products: Roadmaster Tow Bar Quick Disconnects # RM-201. These will allow you to quickly and easily attach and disconnect the tow bar from the base plate kit. RoadMaster 68 inch Single Hook, Coiled Safety Cables # RM-643. These are coiled so that you can just wrap them...
view full answer...

What Do I Need to Use Hitch C11109 with my 2004 Chevy Cavalier
The hitch, # C11109, includes all the mounting hardware you need to install the hitch to your 2004 Chevy Cavalier. In order to tow a trailer, you also need to purchase a drawbar, and the ball itself that sits on the drawbar. The drawbar for this hitch is part # 3592. This bar includes a hitch pin and clip. Your drawbar requires a ball with a shank diameter of 3/4 inch. I have added a page link that will show you all the balls that would fit your drawbar. You need to select the ball diameter...
view full answer...

Is Drilling or Modification Needed to Install Draw-Tite Trailer Hitch # C11109, 2000 Chevy Cavalier
To install the Curt Trailer Hitch, # C11109, to your 2000 Chevy Cavalier, you will need to temporarily lower the exhaust to get the hitch into position but then put it back after the hitch is installed. The only drilling that may be required is to enlarge some existing holes needed for installation. It will also require you to trim the heat shield. I have included a link to the installation details for reference. If you plan on doing some towing, the recommended ball mount is # C45519...
view full answer...

Is AxleTek Idler Hub Available Without The Race
The # AKIHUB-440-2-G-2K idler hub is a casting that has a machine finish. This 2,000 lb hub has a galvanized finish and has a 4 on 4 wheel bolt pattern. This hub comes with the race already pressed in place and the bearings, seal, grease cap and lug nuts included. We do not carry the hub as a separate item.
view full answer...

Parts Needed to Flat Tow a 1999 Chevy Cavalier
For your 1999 Chevy Cavalier you would need to start with a base plate kit to provide the connection point for the tow bar. For that you would need the Blue Ox kit part # BX1620. (excludes Z24 model.) In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520 that you referenced. For safety cables you can use # RM-643. The coiled design...
view full answer...

Will the SportRack Semi-Custom Roof Rack # SR1005 Fit a 2-Door 2003 Chevy Cavalier?
Yes, the SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 45-1/2" Long # SR1005 will fit both 2-door and 4-door models of the 2003 Chevrolet Cavalier.
view full answer...

Trailer Hitch for 2002 Chevy Cavalier LS
The hitch that fits for your 2002 Cavalier LS is the Curt Trailer Hitch Receiver # C11109. If you were planning on using the hitch for light duty towing, you'd need the following items to complete your towing set-up: Trailer wiring harness, part # 18252 Ball mount, part # 3592 1-7/8 inch ball mount, part # 19256 or 2 inch ball mount # 19258
view full answer...

Adapter to Use Blue Ox Aventa II Tow Bar w/Roadmaster Base Plates, 1998 Chevy Cavalier Convertible
To use your Blue Ox Aventa II tow bar with the Roadmaster base plates, # 175-3, you can use the adapter that you referenced, # RM-032. It is compatible with the tow bar and the XL style base plates from Roadmaster. I have included a link to a video review of the adapter and a helpful link to our series of FAQ articles on flat towing for you.
view full answer...

Can You Use a Blue Ox Base Plate Kit with a Valley Tow Bar
Yes, you can use Valley Tow Bars with a Blue Ox Base Plate like the Blue Ox Base Plate Kit # BX1647. You will need a Blue Ox Base Plates Adapter # BX8833 in order to adapt your Valley tow bar to the # BX1647. I attached an FAQ article on flat towing that you should find informative also.
view full answer...

Availability of Bearing Buddy Grease Seal part # BB60001
We do carry the grease seal part # BB60001 that you referenced. It has an inner diameter of 1.375 inch and 1.980 inch.
view full answer...

Replacement Installation Hardware for a Curt Trailer Hitch on a 2005 Chevy Cavalier
To replace the hardware for trailer hitch # C11109 you will need Replacement Hardware Kit for Trailer Hitches Item # RHK. Enter the hitch number and manufacturer where indicated on the RHK to get the proper hardware. Once you add it to your cart you can see shipping options. I have also included a link to a video showing an example installation of the hitch for you.
view full answer...

Parts Needed to Flat Tow 2003 Chevy Cavalier with Roadmaster Base Plate Kit
The base plate kit part # 3116-1 is correct for your 2003 Chevy Cavalier as well as everything else but the tow bar. The Curt bar cannot connect to Roadmaster base plate kits so you'd instead want the # RM-501 for a similar option. This will work great with the safety cables # RM-643, the lighting # RM-152-98146-7 and the Brake Buddy # HM39494.
view full answer...

Hitch Recommendation for a 2000 Chevy Cavalier
For your 2000 Chevy Cavalier I would recommend you get a Curt Trailer Hitch # C11109. I attached an installation video for this product for you to check out also. You may be interested in the following products to complete your towing setup: Trailer Wiring Kit # 18252 Ball Mount # 3592 1-7/8 in Hitch Ball 19256 2 inch Hitch Ball 19258
view full answer...