Tonneau covers like your OEM model 84203262 which covers your bed rails and stake pockets prevent using a ladder rack since there are no accessible mounting points to install one.
To add cargo carrying capacity to your Canyon we do have roof racks for the cab. For a quiet aero-style rack for a Crew cab with bare roof we have a great value rack from Rhino-Rack, their black Vortex system made of parts # RRVA126B-2, # RRRLKVA and # DK330. This rack gets you a 165-lb load rating and it costs... view full answer...
A bull bar will provide with some protection if you were to hit a dear. Currently, we do not have a bull bar that is compatible with your 2022 GMC Canyon, but historically they use the same mounting holes. You will most likely have to choose between on or the other. Personally, I would go with a front mounted trailer hitch. You can do more with the hitch when compared to the bull bar. We do have a front hitch receiver that is compatible with your vehicle, the Curt Front Mount Trailer Hitch... view full answer...
Good question, and no, you do not need to trim the front metal skid plate on your 2016 GMC Canyon to install the Draw-Tite front hitch that fits, which is the following part number:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65071
The only trimming that is needed on your '16 Canyon to install the # 65071 is a small 3-1/4" x 3" cut out of the lower air dam fascia. view full answer...
A good option for a ladder rack on your 2018 GMC Canyon with a 6 foot bed and the BAKFlip G2 Hard Tonneau Cover # BAK26125 is the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-783 because of its quality and functionality; it will allow you to carry ladders as well as a canoe or kayak.
You should note that due to how the BAKFlip G2 installs, ladder racks are going to potentially interfere with the weather strip of the cover (see accompanying photo), which means it may come... view full answer...
I confirmed with my contact at Firestone that the Sport-Rite Air Helper Springs # F2587 you referenced will work perfectly on your Diesel 2016 GMC Canyon.
These air springs feature a 3,000 pound load-leveling capacity and will install using the included brackets and hardware for a no-drill application. view full answer...
Yes, the Pop & Lock Custom Tailgate Lock # PAL8140 referenced in your question will fit and work great on your 2017 GMC Canyon that features the backup camera in the tailgate handle. There will not be any interference between the 2 components. I verified this with Pop & Lock.
If you don't happen to have existing power locks then you will just need to add the Switch Kit # PAL9520. If you have a Crew Cab model you will likely also need to add the Extension Harness # PL9510 to reach the required... view full answer...
I spoke with B&W and they said that the only function on the new MultiPro Tailgate that cannot be used with The B&W Tow & Stow # BWTS10037B is the step function. You will still be able to use the other functions of the tailgate without interfering with this mount but you would need to remove the Tow & Stow in order to use the step on the tailgate. view full answer...
To start you will need a base plate, I recommend the Blue Ox Base Plate Kit - Removable Arms # BLU93FR. It is a hidden and sturdy design to spread towing force evenly to prevent stress on the towed vehicle.
Next you will need a tow bar and safety cables, I recommend the Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000 lbs # BX7420. It is a non-binding tow bar that folds up and stores at the rear of your RV.
You will also need the Roadmaster Universal Hy-Power Diode... view full answer...
The Air Lift Ride Control Air Helper Springs, # AL59533 are confirmed to fit the 2019 GMC Canyon but cannot be used on a lifted vehicle.
I suggest the RoadActive Suspension Custom Leaf Spring Enhancement Kit, # RAS4617 as long as you still have the factory leaf springs in place. It has been confirmed to fit the factory springs, may or may not work with aftermarket springs, has not been tested. view full answer...
I have a solution for you, but a ladder rack may not be the answer. While we have the DeeZee Invis-A-Rack Folding Ladder Rack # DZ951601 for 6 foot beds or # DZ951551 for 5 foot beds, we do not have a tonneau cover that will work with this ladder rack.
In order to be able to install a tonneau cover and a ladder rack on a 2015 GMC Canyon, it is important to make sure that the installation of both items will not interfere with each other. You will want a low-profile tonneau cover that installs... view full answer...
I have emailed one of my contacts at Firestone, who assured me that the Firestone Ride-Rite Air Helper Springs, part # F2384 WILL carry over to the 2010 model GMC Canyon.
I have added a link below to the install instructions for the helper springs. view full answer...
For your 2016 GMC Canyon, the correct engine block heater will depend on which size engine you have. If you have the 2.5L I4 engine then you will want to use part # KH11484 but if you have the 3.6L V6 engine then you will want to use part # KH11811. If you are unsure of which engine you have there is an information sticker under the hood which will tell you which engine you have.
Both of the above engine block heaters come with a set of installation instructions. The instructions are generic... view full answer...
The Malone MegaSport Kayak Trailer # MPG535 has 86" wide crossbars so you will be able to lay both kayaks side-by-side and they will stick out 1" on either side.
The best kayak carrier for your application is the Malone MegaWing Fishing Kayak Carrier with Tie-Downs # MPG207 because you will be able to easily load up each kayak and it has a weight capacity of 150 lbs so it should be able to handle the size of your kayaks just fine. Obviously you'll need 1 set of this carrier per kayak.
We... view full answer...
Yes, the Curt High-Low Adapter for Tow Bars item # C59KR can be used with the Roadmaster Falcon All Terrain, Non-Binding Tow Bar item # RM-522. The high-low has a maximum weight capacity of 7,500 lbs. view full answer...
The base plate kit you need for your 2015 GMC Canyon so it's compatible with the Roadmaster StowMaster Tow Bar # RM-501 is the Roadmaster Crossbar-Style Base Plate Kit # RM-523182-4. This kit is directly compatible with the StowMaster but if you're missing the Quick Disconnect adapters or need to replace them you can find them as part # RM-222.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system,... view full answer...
Excellent questions, so I checked with the manufacturer, Aries Automotive, and your 2018 GMC Canyon Terrain is 100 percent compatible with the Pro Series Grille Guard you asked about, which is the following part:
- Aries Pro Series Grille Guard with Mesh LED Cover Plate # AAP4088
So this will fit your '18 Canyon Terrain and you are correct that your tow hooks will be kept on your truck. In regards to the light bar, there is an exact fit for this grille guard with the Aries Automotive... view full answer...
The K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair # KS3990 are a great solution and will fit your 2019 GMC Canyon very well. The # KS3990 uses heavy duty rubber ratcheting straps to secure the mirrors tightly on your Canyon's mirrors, this will help them stay on and reduce vibration very nicely so the view behind you isn't distorted.
I've linked a review video of these on a 2017 GMC Canyon for you to check out as well. view full answer...
The width of the bed isn't changing between the model years so you shouldn't have a problem with installing the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 on your new 2023 GMC Canyon. view full answer...
The best solution would be a mid-level ladder rack confirmed to fit the bed of your 2015 GMC Canyon like theYakima OutPost HD part # Y01152-58. view full answer...
The 1-1/4" or less you're referring to for the Pop And Lock # PAL9000 refers to the hole size that is left when your handle is removed, which you should be able to get an idea of by looking on the back/inside of the tonneau. However, I spoke with my tech contact over at Pop and Lock and he mentioned that ideally the handle is 1-1/8" and that a 1-1/4" handle might be too tight of a fit. Additionally, you'll want to make sure that your handle connects to cables and not rods, to allow for... view full answer...
Go To Results