For your Hyundai Kona EV, you can use the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class I - 2" # DT52GR.
For a bike rack, my recommendation for you is the Swagman Chinook Bike Rack for 2 Bikes # S64683. I've attached a video to show you the installation and features like the locking hooks and the folding feature when not in use. view full answer...
We only carry one spare tire mounted bike rack that has the ability to offset to the side for vehicles likes yours where the spare of the vehicle is not mounted in the center.
For that you'd need the Thule Spare Me part # TH963PRO.
I really wish we had a way to make your Surco bike rack fit better, but having the bike extend past the vehicle is not really a safe route. view full answer...
For your 2014 Honda CR-V the hitch I would recommend is the Draw Tite part # 75742 that you referenced. Reason being that with this hitch you don't have to use a stabilizer strap with non-supported loads like bike racks which is what Curt recommends. I attached an install video for this hitch for you to check out as well.
For trailer wiring you'd then want the Tekonsha part # 118561 that is also a confirmed fit.
Since you wanted to do some towing you might be interested in etrailer ball... view full answer...
Draw Tite does not require you to use stabilizer straps with their hitches when you are carrying a non-supported load like a bike rack so fo ryour 2008 Honda CR-V the hitch you would want is the Draw Tite part # 75547 which is a confirmed fit.
If you were looking for a 4 bike platform rack the Hollywood Racks part # HR1400Z would be a great option. view full answer...
Yes! I am happy to say we have a few different options available for your 2013 Jayco Melbourne on a Ford E-450 chassis. For great quality mats that will fit the contours, of your vehicle, I recommend WeatherTech brand mats. WeatherTech mats are a great economical option that will keep your cab protected from anything you drag into the vehicle. Here are the options we carry:
- WeatherTech All-Weather Front Floor Mats - Black # WTW51
- WeatherTech All-Weather Front Floor Mats - Tan # WTW51TN
-... view full answer...
Your Freelfree Overdrive Lure II Tandem kayak will indeed fit on your existing roof rack. According to what I've managed to look up, the kayak weighs up to 115 lbs, which is well within the capabilities of the Yakima Jetstream roof rack you mentioned.
I have the perfect carrier for you. The Yakima BigCatch # Y04091 would work great for you. Due to the width of your kayak, using a j-style carrier like the Thule # TH834 Hull-A-Port wouldn't be a good choice, but the BigCatch would allow... view full answer...
We have a great rack for you!
It's the Saris Freedom, part # SA4412B. It secures bikes by the frame and can handle up to 60 pounds per bike. The threaded hitch pin prevents sway with an anti-rattle bolt, which is a must when travelling on the highway. The tightening down is by use of knobs and ratchet straps, making it a very easy setup.
I've linked to a video review of this rack for you to look at. view full answer...
I suggest the Yakima HighRoad Roof Bike Rack # Y02114. I like that it is a wheel mount carrier, so no frame contact and no need to remove the wheel like with other styles and the integrated TorqueRight knob prevents the wheel hoop from being over- or under-tightened.
I've attached a link to a video reviewing this product. view full answer...
Yes the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13397 is confirmed to fit your 2020 Honda CR-V Hybrid. There are plenty of customer reviews for this product, none of which claim that there are any fitment issues with the hybrid model. This hitch receiver offers a simple bolt-on installation process, requiring no welding. I have attached a detailed installation video for you.
If you will be towing a trailer at some point then you will need a trailer wiring kit. I recommend... view full answer...
The Roadmaster Direct-Connect Base Plate Kit, # RM-521567-5 that you linked to is confirmed to fit the 2012 Honda CR-V. But the Roadmaster Falcon 2 Tow Bar, # RM-525 is compatible for Blue Ox vehicle-specific base plates. So please confirm the tow bar you have prior to ordering base plates and use the Blue Ox Base Plate Kit, # BX2258 if you do have the tow bar for Blue Ox base plates. These are direct connect style so no need for a crossbar to be used with the tow bar. Note that there... view full answer...
While not necessarily intended for carrying surfboards the Rhino Rack Kayak Carrier part # S512 could be used to carry a board if needed.
A better option for you might be the LockRack carrier part # LR54FR which can easily carry a kayak or a surfboard. view full answer...
I have a great trunk mounted bike rack I can recommend for your 2009 Honda CR-V but Thule actually does not list any of their racks as fits for your vehicle. The trunk rack I recommend the highest though is the Yakima Fullback part # Y02634 as this is a very robust rack, has a wide pad where the rack touches the vehicle paint which allows the weight of the bikes to be evenly distributed, is very adjustable which makes loading/unloading bikes and install and uninstall of the rack very easy,... view full answer...
I took a look at the owner's manual for your 2018 Honda CR-V and it does say you need to use cables, and on the front tires only so you should definitely follow that guideline so as not to cause any unnecessary damage.
With that in mind I recommend the Titan Chain Diagonal Alloy Cable Snow Tire Chains # TC729DC because they have a diagonal cross pattern that will increase your traction and are easily installed with the included rubber tensioners.
These chains will fit tires that are... view full answer...
Yes, we have the etrailer hitch part # e98848 that fits your 2021 Honda CR-V Hybrid and would work great. It has solid towing capacities and also is mostly hidden. We've had several customers with Hybrid models report back to us how well the hitch fit. view full answer...
I attached an install video for the Roadmaster InvisiBrake part # RM-8700 that shows it being installed on a 2013 Honda CR-V just like yours. This will cover exactly how to install this product in your vehicle.
To power this unit you will need to run the power wire up to the positive post of the vehicle battery. I can't recommend you power it with the brake controller wiring of your vehicle.
For a much less invasive braking unit you would instead want the Patriot part # BLU37TR. This... view full answer...
The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36597 you were looking at is confirmed to fit your 2020 Honda CR-V EXL since it is not a Hybrid version, and will work perfectly with your Yakima LiteRider 2 bike rack with one bike.
You are correct that the # 36597 has a maximum tongue weight rating of 350lbs which is more than enough for one bike and a your bike rack.
I included a video of the # 36597 being installed for you to take a look at. view full answer...
It sounds like you may have forgotten to install one of the two included fuses of the Curt Harness part # C56158. The larger fuse that goes in the red fuse holder powers the entire converter so without it the lights wouldn't function. You can test the box to make sure it is not the problem.
What you will want to do is test the wires going into the box of the converter box for voltage with a circuit tester like the # PTW2993 to see if there is voltage going into the box when the taillight... view full answer...
I can certainly help you out with that. First off, the Thule Hullavator # TH898 requires crossbars that hang over the edge of your vehicle's roof by at least 4" on each side. Second, the Hullavator also weighs 40lbs, so you will need a roof and a roof rack with a weight capacity to handle the 40lb carrier along with your kayak. It looks like your roof can hold up to 165lbs but you will want to check your owner's manual to verify.
Since you have the touring model, you likely have flush... view full answer...
For a set of tire chains that will fit the 225/65-17 tires on your 2013 Honda CR-V and that are great for snow and/or ice I recommend the Konig XG12 chains # TH01594245. These chains have a diamond pattern to cover a good portion of the tire tread and the steel plates in the centers are great for grip/breaking up ice. view full answer...
Go To Results