The tap you want to use for installing the Curt Trailer Hitch Receiver # 13555 on your 2011 Honda CR-V is 10x1.25mm as the bolts that come with the hitch are M10x1.25.
Attached is an installation video of this hitch on a 2011 CR-V for you to check out. If you let me know what you plan on using the hitch for I'd be more than happy to make a recommendation for you! view full answer...
You get covers for both the driver's seat AND passenger's seat with the Covercraft SeatSaver Custom Seat Covers # SS2497PCCT.
These front seat covers are confirmed to fit your 2015 Honda CR-V. view full answer...
Yes, the Draw-Tite Trailer Hitch # 76128 that fits your 2018 Honda CR-V does include the fish wire (pull wire) that you asked about. If you take a look at the cut out of the linked installation instructions you can see the fish wire is included, as well as the other hardware that comes with the hitch.
This hitch is a great choice for your '18 CR-V because it is strong, with a 4,500 lb towing capacity and whopping 675 lb tongue weight capacity, as well as highly durable, which is evidenced... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75547 which is a fit for your 2007 Honda CR-V does not come with a trailer wiring harness for lights. This will need to be purchased separately, I recommend the T-One Vehicle Wiring Harness part # 118427 because it is plug and play which you can see in the attached install video and it is our most reliable option we have for you.
I have attached an install video for you as well of the trailer hitch. If you don't already have a ball... view full answer...
You cannot order a specific key number with the Camco Cam Lock # CAM44353 and it does not use the standard CH751 that is so common, it will be keyed uniquely. view full answer...
I checked the parts breakdown in the instructions for Draw-Tite trailer hitch # 24792 and it does indicate that two 7/16 inch pull wires are included. I have linked those instructions and a video showing an example installation for you. view full answer...
The Draw-Tite, part # 24792, is a 1-1/4 inch hitch opening. You will need draw bar part # 3593 and must only be used in the rise position on your CR-V. The draw bar has a 3/4 inch shank diameter so you could use part # 19256 as your ball. Using these parts, your maximum tongue weight is 200 pounds and maximum trailer weight is 2,000 pounds. If your CR-V has lower ratings, you must abide by those.
I have included a link to the instructions for the hitch and draw bar. view full answer...
Yes, trailer hitch # 24790 does include the installation hardware for installation on your 2000 Honda CR-V. I have included a picture showing the hardware. I have also included a link to the installation instructions to the right for you.
If you are planning on doing any towing with the hitch, first consult the vehicle owners manual for the CR-V towing capacities. For a ball mount use # 3590. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118336. view full answer...
The Replacement Attachment Tab Assemblies for Blue Ox Baseplates - Short Front/Short Back, # BLU57XR comes in a quantity of 2 tabs with 2 spring pins. view full answer...
At the beginning of the installation video (linked below) for the Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-152, it states in conjunction with the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit, # RM-146-7. These are two separate components that work together. They are not packaged together as # RM-15267 or, each is able to be purchased separately as they can be matched with other options as well. These are not each vehicle specific. view full answer...
Yes, you will receive the installation instructions for the Curt Trailer Hitch Receiver # C13397 so that you can install it on your 2019 Honda CR-V.
We do have the installation video of this on a 2019 model like you mentioned. I have attached that as well as a link to the written instructions to this page for you to check out.
If you let me know what you plan on using this hitch for I can make some recommendations for you. view full answer...
Thanks for reaching out!
The Demco SBS Stay-IN-Play DUO # SM99251 uses 16 gauge wire for those systems. I confirmed this with my contact at Demco.
We have a variety of options available by the foot here on our site:
Single Wire - # 16-1-1
3-Wire - # SWC6422-1
4-Wire - # DW03240-1
I recommend using 16 Gauge Butt Connectors # DW05744-10 for the most secure connection. view full answer...
The hardware pictured on the product page for Curt Trailer Hitch, # 13535, for the 2004 Honda CR-V, is included with the hitch.
You will receive:
2 fish wire tools
2 hex flange nuts
4 carriage bolts
4 spacers
4 large hex flange nuts
1 U-bolt
I have included a link to the installation details and a video installation below. view full answer...
Thank you for the compliments on the install videos. I too think that our install and video team do a great job at providing people with excellent instructions.
The SMI Air Force One Supplemental Braking System for Motor Homes with Air Brakes # SM99243 that you are interested in does come with all of the butt connectors that you will need for installation, but they are basic ones and not the heat shrink version. The Deka Heat Shrink Butt Connector that is mentioned in the video (at the... view full answer...
The Swagman # S64705 Race Ready roof bike rack does indeed include a lock and 2 keys. The ratcheting hook that holds the bike upright is lockable, as you can see in the photo I put together for you.
I've linked to a demonstration video featuring the Race Ready bike rack. view full answer...
The crossbar style of Roadmaster base plate kits like the part # RM-521567-4 do not actually come with a crossbar but instead attach to tow bars that have crossbars like the Roadmaster Falcon 2 part # RM-520.
Or if you prefer not to use the crossbar attachment you can use a Direct Connect base plate kit like the part # RM-521567-5 which bypasses the crossbar attachment of the tow bar. The Falcon 2 can also be used with this but just without the crossbar. view full answer...
Roadmaster EZ5 Base Plate Kit # RM-521567-5 consists of the main base plate assembly that bolts on to the CR-V and the removable twist-lock arms that connect to a compatible tow bar like the Falcon All Terrain # RM-522. Lighting/wiring components for the towed vehicle are not included with the kit but you can see such items using the linked page.
Wiring/lighting kit options for your CR-V include custom-fit plug-in harnesses like the Hopkins # HM56304, magnetic light kits like # TL21RK... view full answer...
The Roadmaster StowMaster and StowMaster All-Terrain Combo Kit # RM-9252 does include coiled safety cables. The linked video illustrates. The safety cable set on its own is part # RM-643. view full answer...
Yes, all of our trailer hitches come with all of the hardware needed to install them. For your 2020 Honda CR-V I highly recommend going with the etrailer Trailer Hitch # e98848 because it's the only option that has a matte black finish. This not only matches the trim style of your vehicle but it actually does a better job of protecting the trailer hitch than the glossy black finish does on the other hitches available. I have attached an installation video for you to check out.
If your... view full answer...
The bolts that come with the Curt Trailer Hitch # 13555 on your 2008 Honda CR-V are M10 - 1.25 x 30 hex bolts. We actually have replacement hardware available as part # RHK on our site. Simply go to the product page and then select the manufacturer from the drop down menu and input the part 13555 into the hitch number box.
I have attached the installation instructions as well as a video that you can reference. view full answer...
Go To Results