Any bike rack will require some degree of lifting to seat the bike within the carrier. A hitch mounted platform type rack is definitely the right choice when being concerned about lifting height; especially if you already have a hitch installed on your 2019 Honda Cr-v. This style will require lifting the bike to less height. I suggest the hule Helium Platform XT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount Item # TH53GC. At 43 lbs this carrier is itself a little lighter... view full answer...
I do have a way that you could possibly transport your motorcycle with your 2015 Honda CR-V but unfortunately all of the motorcycle carriers are fits for 2" receivers so you will need to use a trailer to move your motorcycle around. It is worth noting as well that the online version of your owner's manual states that the vehicle is only rated to tow 1,500 lbs and that the tongue weight should never exceed 10% of that (which means you have 150 lbs of tongue weight). Even if your 1-1/4" receiver... view full answer...
The InfiniteRule # 34061071-D hitch lock isn't available keyed alike, but we do offer a stainless steel locking hitch pin with the same 2-5/8 inch inside span dimension that is. I'd recommend the etrailer brand # e98882. On the linked product description page, simply choose '2' as the quantity and choose 'keyed alike' from the drop down menu, and you'll receive 2 keyed alike hitch locks.
I've linked you to a product demonstration video. view full answer...
Yes, we do have the second row and rear cargo area mats for your 2013 Honda CR-V. If your CR-V is the EX-L model then the front ones you have selected, # WT444021, will fit. If it is not an EX-L version then you will need # WT447371.
The second row liners are the same for both EX-L models and non-EX-L models, # WT444022.
And for the cargo area you can use # WT40524 for EX-L and non-EX-L models. I have linked a couple of review videos for some of these mats for you to view. view full answer...
I ran out the our warehouse, and pulled one of the Fulton Snap-Ring Swivel Marine Jacks, part # FTJ12000101 off the shelf. The caster does indeed swivel. The caster is welded to the interior pipe portion of the jack, which is free to swivel. view full answer...
According to Roadmaster, their # RM-521567-5 direct-connect base plates are compatible with your Falcon 5250 tow bar. Compared to the # RM-521567-4 which requires a crossbar, the # RM-521567-5 makes for a cleaner install that's easier to use.
To complete your flat towing system, you'll need safety cables like # RM-643 if you don't already have them, a taillight wiring harness like part # RM-15247 and a supplemental braking system like the Blue Ox Patriot # BLU37TR and possibly a high/low... view full answer...
The Draw-Tite Class I Trailer Hitch, part # 24792, has a 1-1/4 inch receiver. The receiver is welded to the cross tube and cannot be changed. However, Draw-Tite manufactures a Class III Trailer Hitch with a 2 inch receiver opening for the 2007 Honda CRV. It is part # 75547. view full answer...
We can help with a way to activate the taillights of your 2012 Honda CR-V when it's being flat towed but the supplemental braking kits like the InvisiBrake part # RM-8700 are not designed provide that function.
What you would need for that is the # RM-152-98146-7 which comes with everything needed to control the taillights of the CR-V with you tow vehicle. view full answer...
If the tow hook on your rear bumper is still present on your 2017 Honda CR-V the Draw Tite hitch part # 76128 will still fit. It attaches to the side frame rails and then the tow hook. If the section removed was not the tow hook you'd be good. view full answer...
I recommend using the CIPA Rearview Boat Mirror - Convex Glass - Windshield Mount # CM11119 because it has a smaller mirror face than a lot of the other available and comparable mirrors since it is 8" long by 2-1/2" wide. This mirror will mount on round or square tube windshield frames 7/8" and smaller.
I've linked our review video of this mirror as well as a picture that shows this mirror in use by one of our happy customers. I've also linked our entire selection of boat mirrors in the... view full answer...
Yes. The Thule Fit Kit for Podium Style Foot Packs # THKIT3050 is fit for the tracks on your 2002 Honda CR-V and can be used to mount the Thule Podium (discontinued-formerly TH460) or Thule Rapid Podium # TH460R feet. If you also need crossbars for this rack, you can use the Thule WingBar Evo Crossbars # TH711420 to complete your roof rack. These are the most aerodynamic crossbars offered by Thule and will do a great job of eliminating most wind noise associated with roof racks. The WingBar... view full answer...
Unfortunately, Thule doesn't offer a 1 bike version of the # TH93202 EasyFold XT bike rack. For a 1-bike platform type rack, I recommend the RockyMounts HighNoon FC Solo Bike Rack # RKY87RR. TheRockyMounts HighNoon rack has a 60 lb capacity, so it's perfect for e-bikes, and although it lacks a ramp it's still fairly easy to get a bike on a platform type rack. Lift up the front wheel and place it in the cradle, raise the arm and ratchet it down loosely to hole the bike somewhat upright,... view full answer...
The Yakima StickUp, # Y02420, is stuck being a 2-bike rack. There is no add-on that will allow you to carry 4 bikes. Since you need to carry 4 bikes you have some options. You can go with a full time 4-bike rack or you can go with a 2-bike rack that does have an add-on feature that will allow you to carry 2 bikes when needed.
I will give you the best options for each of these racks based on similar functionality and other characteristics displayed by the StickUp.
For a strictly 4-bike... view full answer...
Curt offers a 2-inch Class III trailer hitch receiver for the 2014 Honda CR-V, part # C13119, which is one of several options available for your car. This 2-inch hitch is rated for 350-lbs tongue weight and 3,500-lbs gross trailer weight.
Please note that Curt requires use of a stabilizing strap for all non-trailer loads, such as bike and cargo carriers. Their strap # 18050 is an ideal solution. This simple and inexpensive cam-buckle support strap will help to stabilize any accessory... view full answer...
Universal hitch locks like the Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock # 63232 and the other similar lock shown on the linked page are not offered keyed-alike.
We do offer 2-inch hitch locks that can be ordered keyed alike but these are not anti-rattle types. These are shown on the other link. For example, etrailer # e98880 fits 2-inch hitches and can be ordered keyed-alike in any quantity you need. So too can their stainless steel lock # e98882.
Simply select the Keyed Alike... view full answer...
You would need to use a small extension to allow the Blue Ox Avail part # BX7420 to fold up when not in use. For that the part # BX88265 would be perfect. It can provide up 6-3/4" or 8-3/4" of extension and would work well as it is intended for use with tow bars. view full answer...
The etrailer class 3 hitch # e98848 will be a good fit for your 2024 Honda CR-V Hybrid Touring model. In all likelyhood, the hitch will interfere with the hands free liftgate sensor, and functionality will be very limited, or completely lost. There are relocation kits available thru Honda. We do not carry the relocation kits here at etrailer, you would need to obtain one directly from a dealership. view full answer...
We do carry the base plates for your 2006 Honda CRV that will work with the Roadmaster Sterling All-Terrain Non-Binding Towbar with 6 Wire Electrical, item # RM-576. Does your CRV have a brushguard or front bumper extra trim package? view full answer...
We have a great option for you in the Saris Bones EX 3 Bike Rack, # SA803. This is great for cars with spoilers due to their arched feet that act as an extra support for the straps that go up and over your spoiler.
We also have the Yakima Fullback 2 Bike Rack, # Y02634 and the three-bike version, # Y02633. This is a very sturdy and easy to use bike rack. It also comes with a cable lock for extra protection. The FullBack uses a hub setting to adjust the angle for installation.
My suggestion... view full answer...
The only running board kit to fit your 2020 Honda CR-V comes from Aries:
- AeroTread Running Boards w/ Custom Installation Kit # AA2051034
This kit unfortunately does not have a light kit that comes with it or that can be added so you'll be limited to a standard running board kit. view full answer...
Go To Results