For your 2020 Toyota C-HR both the Curt hitch # C11490 and the # C11567 are a confirmed fit and are essentially the same thing. To find an installer in your area the best solution would be to check with local mechanics to you with a good reputation and allow them to install the hitch. view full answer...
For your 2022 Toyota C-HR we have the Draw Tite hitch part # DR94FR as a confirmed fit. The Curt you mentioned is not a fit and would not work. If you need trailer wiring too the Tekonsha part # 118756 is the best option as it's most reliable and easiest install. view full answer...
If you're looking for the easiest hitch to install on your 2019 Toyota CH-R, then the Curt # C11567 is your best option. Installing this hitch is actually pretty straight forward:
To gain access to the mounting points, you'll begin by removing two underbody panels on the rear of the vehicle. From there. remove the fascia clips holding the lower bumper fascia to the rear bumper body panel.
With the panels out of the way, remove the bumper beam assembly. Once removed, use a hammer to... view full answer...
I have the perfect solution for you in the Saris SuperClamp EX 2 # SA4025F, which will fit in the 1-1/4" hitch receiver in your 2019 Toyota C-HR. This rack weighs in at 35-lbs, so it's one of the lightest racks on the market, and it will tilt away from your rear cargo area, as well as fold up when it's not in use. This rack comes with a hitch lock and locks for the bikes, so everything will always be secure. This is also a wheel mounting rack, so you won't have to worry about using a frame... view full answer...
Your 2019 Toyota C-HR is only compatible with Class I hitch receivers. This will limit you to carrying just two bikes. The hitch receiver that I recommend is the one you attached to your question, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4", part # C11490. I like this hitch receiver because once it is installed you can only see the receiver opening. This hitch receiver has a maximum tongue weight of 200 lbs and a maximum gross trailer weight of 2,000 lbs.
If you are... view full answer...
For your 2021 Toyota C-HR the two hitches are basically the same which is very interesting but the difference between them is very subtle which allows the # C11490 to fit all models of the 2018 to 2021 Toyota C-HR whereas the # C11567 happens to also fit the 2019 through 2021 Toyota Corolla hatchbacks as well as the C-HR models. So honestly Curt probably should have just the one part number but they have both. view full answer...
Curt trailer hitch # C11567 is a confirmed fit for the 2018 Toyota C-HR. There is no drilling required for installation. I have included a video of this hitch being installed on a 2018 Toyota C-HR. I hope this will help.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. I have linked the... view full answer...
The trick to picking out a roof rack fairing is to go with the length of fairing that best matches the distance between the feet of the roof rack.
If that distance is closer to 48 inches you'd want the part # INA262 or if it's closer to 40 inches you'd want the # INA261. view full answer...
Yes as long as you have a hitch installed on your 2019 Toyota C-HR like the # C11567 the Swagman XTC2 part # S64670 will fit and work really well. view full answer...
Although we do not do trailer hitch installations in Florida (or at any location outside of our Missouri headquarters) you only need to find a local qualified mechanic who should be able to do this type of installation fairly easily.
I do recommend just calling and asking if they have any type of experience with this. If you need a recommendation for a hitch and bike rack I'd be happy to help if you let me know the year, make and model of your car. view full answer...
Go To Results