Expert Answers about Chevrolet Avalanche
- Compatibility of 7-way to 5 or 4-way Trailer Connector with Integrated Resistors for Boat Trailer
- The 7-Way to 5-Way/4-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs # C35FR will work with your 2008 Chevy Avalanche. This adapter has load resistors to correct any lamp out errors from LED lights not pulling enough power to let the system know that incandescent bulbs are not burned out.
view full answer... - Extension for Rhino-Rack Sunseeker Roll-Out Awning
- We offer the Extension Piece for Rhino-Rack Sunseeker Roll-Out Awning # RR32111 which provides an additional 43 square feet of coverage for your campsite. The extension measures 78-3/4 long x 78-3/4 wide.
view full answer... - Compatibility of BOLT Lock Cylinder on 2007 Chevy Avalanche LT Toolbox
- I can help you find the right replacement lock cylinder for your 2007 Chevy Avalanche LT Toolbox.
If your current lock cylinder can be removed from your Avalanche's toolbox then you will need the Late Model GM Key Cylinder from BOLT # BL692915. Usually, if the lock is going to be able to be replaced it will have a thin nut on the back of the cylinder on the interior of the toolbox that can be loosened and removed. I've included an image to show you what I'm talking about.
If you happen...
view full answer... - Fitment Issues of Timbren Rear Suspension for Lifted Truck
- It does appear to have proper fit for the Timbren Rear Suspension Enhancement System # TGMRSB4S, that you would have to insert a spacer between the Timbren and the mount on your lifted 2002 Chevrolet Avalanche 2500 4x4.
The Spacer # A25723-90AH00 will allow you to acheive the correct geometry for your Avalanche. At this time we do not carry the correct hardware to go along with these so you will need to find bolts that are 1" longer than the included bolts in the kit.
view full answer... - Availability of Front Mounted Hitch for 2012 Chevy Avalanche 1500 z71
- I spoke with my contact at Curt and he said the reason they do not have a front mounted hitch for the 2012 Chevy Avalanche 1500 z71 model is because the suspension is set up different with a skid plate and extra stabilizer. If you were to removed these two parts it is possible you could install the front mounted hitch # C31069, however Curt hasn't tested this hitch with the z71 model so they cannot say for certain that it will work.
Drilling is required to install this hitch. I have included...
view full answer... - Compatibility of Curt Front Mounted Hitch on 2005 Chevy Avalanche 2500 LT
- The Curt Front Mount Trailer Hitch Receiver # 31108 is not a fit for your 2005 Chevy Avalanche 2500 according to my contact at Curt. You instead will want the Curt - Custom Fit - 2"# 31302 which is a fit.
view full answer... - Tire Chains for a 2004 Chevy Avalanche with 265/70-16 Tires
- The Titan Chains, # TC2324, will fit the 265/70-16 tire size on your 2004 Chevy Avalanche but will not fit either of the tire size options for the 2011 Volkswagen Routan. The Routan should have either 225/65-16 or 225/65-17 tires. The Titan chains fit any of the following sizes:
245/55-19
245/85-15
255/50-20
255/55-19
255/60-18
265/70-16
275/45-20
275/55-18
275/60-17
275/70-16
295/45-18
7.5-16
I will be happy to make recommendations for the Routan if you can verify which tire size it...
view full answer... - Which DeeZee Tailgate Assist Fits 2010 Chevy Avalanche
- We had a customer who was able to install the DeeZee Tailgate Assist part # DZ43102 on a 2010 Chevy Avalanche and it worked well for them. While it's not listed as a fit it would work well for you.
view full answer... - Will Alabama Chrome Mascot Hitch Cover # AMG100017 Fit Factory Trailer Hitch, 2010 Chevy Avalanche
- Your 2010 Chevy Avalanche comes from the factory with a 2 inch trailer hitch. Since you have a 2 inch trailer hitch receiver opening, you will be able to use the Alabama Chrome Mascot Emblem Hitch Cover, # AMG100017, or any other hitch cover designed to fit a 2 inch receiver. You may also be interested in Trailer Hitch Receiver Lock, # e98880, to secure the hitch cover or other accessories and to deter theft. I have included a link to a video review of this lock below.
view full answer... - Is there a Ladder Rack that Will Fit a 2006 Chevy Avalanche
- Because the Chevy Avalanche has a unique bed design, there are no ladder racks that will fit it. What you can do is add a roof rack, see link, and also use a trailer hitch, like # C13422 if needed, and use the Rhino-Rack T-Load, # RTL002, and achieve the same effect.
Or, you could use a universal roof rack single bar, # DTA968, the hitch, and T-Load, which would be more economical than a complete roof rack.
view full answer... - Will the K-Source Towing Mirrors part # KS80900 fit a 2013 Chevrolet Avalanche
- Yes, the K-Source Towing Mirrors part # KS80900 that you referenced are confirmed to fit your 2013 Chevy Avalanche and would work well.
Check out the installation video I attached for these mirrors as well to give you an idea on how they would install.
view full answer... - Will the Yakima FrontLoader Wheel Mount Bike Carrier # Y02103 Fit on a 2010 Toyota FJ Cruiser
- I checked fits with both Yakima and Thule and there is not a bike rack that attaches directly to the factory cross bars on your FJ Cruiser at this time. You could use the Yakima Roof Rack, parts # Y00409, # Y03536 and # Y33TR to install the FrontLoader bike carrier on the roof of your vehicle.
view full answer... - 2010 Chevy Avalanche Truck Bed Expander Compatibility with 4x8 Sheets of Plywood
- The Fold Down Truck Bed Expander - Black # BX4004-02 has a minimum width of 48 inches and a maximum width of 64 inches. The bed length on your Avalanche from my research with the tailgate down would be about 7 foot 3 inches long, so the plywood will not fit with the extender up. If you are only hauling plywood occasionally and want to use the extender for other loads, then you can leave the extender folded to the tailgate for your plywood sheets which will slightly hang past the gate.
view full answer... - Replacement Option for a Titan Aero 6000 Surge Brake Actuator
- I do have some good replacement options for you although you'd have to drill a few new holes for mounting as none will line up with what you have now as the model is discontinued and there are no direct replacements. I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator part # 099-175-20. This coupler is for disc brakes, has a 7,500 lb capacity, designed for a 2" hitch ball, and has an electric lockout actuator.
view full answer... - Does Curt Front Hitch for 2010 Chevy Avalanche Require Modifying Bumper
- The Curt hitch part # C31012 that you referenced does fit your 2010 Chevy Avalanche LTZ and does not require trimming the bumper. You do have to either remove the air dam or trim it but the bumper is not modified in any way.
view full answer... - Weight Distribution System with Sway Control for a 2002 Chevrolet Avalanche Z71 and Camping Trailer
- The Curt 17022 is an older system that doesn't include the built-in grease zerk fittings found on the newer Curt # C17062 system. These systems are very similar in all other capacities.
When looking for the best weight distribution system for your trailer, you want to account for the loaded tongue weight of your trailer as well as any cargo weight behind the rear axle of your Avalanche. The tongue weight is typically 10-15% of the loaded tongue weight of your trailer.
It is very likely...
view full answer... - Westin Sportsman Grille Guards for 2007 Chevrolet Avalanche
- Westin makes a full-coverage stainless-steel grille guard to fit your 2007 Chevrolet Avalanche and that item is # 45-2110. It is also offered in black finish as part # 40-2115. Both kits include the required mounting brackets and hardware for no-drill installation.
All such products for your vehicle appear on the linked page.
The referenced Westin Sportsman Grille Guard # 45-1390 is designed to fit only the Ford F-150 pickup for model years 2004 and 2005. This product does not fit your...
view full answer... - San Francisco Giants Hitch Cover OHCC2124 Fit on 2009 Chevy Avalanche
- The San Francisco Giants Hitch Cover, part # OHCC2124 will fit the 2 inch receiver on your 2009 Avalanche.
The cover includes a plastic clip that will hold the cover in place during normal circumstances, but if you drive off road or travel on bad pavement frequently I'd recommend going with a pin and clip like # PC3 or a hitch lock like part # e98882 to hold the hitch cover in place.
Since hitch covers are frequently stolen, the locking hitch pin is what I'd recommend. If you go that...
view full answer... - Snow Chain Compatibility with 265/65-18 Tires on 2013 Chevy Avalanche
- The Konig Self-Tensioning Snow Tire Chains - Diamond Pattern - D Link - XG12 Pro - Size 267 # TH01594267 you asked from are a great choice for the 265/65-18 tires. You will not put chains on all 4 tires, but only on the rear wheels. These are Class S compatible chains for minimal clearances like your truck. They require 12 mm or 0.47 inches clearance so no contact is made with other components.
I've attached a couple of videos to further assist.
view full answer... - Air Spring Options For 2004 Chevy Avalanche 1500
- So we do have an option for air suspension kits for your 2004 Chevy Avalanche 1500 (so long as it does not have the AutoRide auto-leveling), but I checked directly with the manufacturers and there are no standard air bags that fit your truck. What does fit are air bags that install inside your truck's coil springs; so while they don't fit the same way as air bags on the axle, these springs do provide a great deal of added suspension support.
Like standard air bags, the air bags that fit...
view full answer...
Go To Results