bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Thor


  • Recommended Tow Bar Compatible With Roadmaster D-Ring Adapter
  • The Adapter for Extended D-Ring Bumper Mounts to Roadmaster Tow Bars # RM65FR is only compatible with Roadmaster tow bars like the Falcon 2 # RM-520. There are no D-ring adapters available for the etrailer SD Non-Binding Tow Bar # e34ZR. The Falcon 2 would work well for your application, and would also require safety cables like # RM-643 since they are not included. Also, make sure you verify that your bumper is rated for flat towing. Even though you have D-ring attachments, it is possible...
    view full answer...

  • Recommended Rack For A 2022 Ford F-250 Super Duty Crew Cab Camper Shell
  • I recommend the Rhino-Rack Heavy-Duty Roof Rack for Camper Shells # Y01-130B for your 2022 Ford F-250 Super Duty Crew Cab. This adjustable camper rack system allows you to carry gear on camper shells, hard tonneau, or hardtop resin roofs without headliners. The rack has a weight capacity of 220 pounds and has a limited life time warranty. The bars have a stainless steel construction that has an anti-corrosion coating. If you ever want to haul kayaks with your truck you can install the...
    view full answer...

  • Replacement Hydraulic Brake Actuator For A DA-66 Actuator
  • Yes, the Demco Hydraulic Brake Actuator # DM72VR will be a good replacement for your older actuator DA-66. This actuator has a bolt-on installation and requires 2-1/2 inch x 4-1/2 inch grade-5 bolts which are not included. The actuator works with drum brakes and has a gross towing weight of 7,000 pounds with a maximum tongue weight of 700 pounds. I linked an installation video below on installing the Demco Hydraulic Brake Actuator. If you have any further questions please feel free to...
    view full answer...

  • Is Wiring of Kat's Circulating Tank Heater Adequate for Amperage Draw
  • I'm really sorry to hear about your vehicle catching on fire. I can't even imagine how stressful that would be. I ran this by a guy who was an electrician in a past life though and for the 12.5 amps that this heater draws 10 gauge wire would be more than adequate.10 gauge wire at 12 volts can pretty easily handle 30 amps so 12.5 amps would be no problem at all. He thought that there must have been a short that caused the fire. This could have been due to an issue with the heater potentially...
    view full answer...

  • B and W Turnoverball Gooseneck Hitch that Fits 2022 Ford F-350
  • We do have a B and W Turnoverball gooseneck hitch that fits your 2022 Ford F-350 with the part # BWGNRK1116. The B and W gooseneck hitches are widely considered to be the nicest around so this would fit and work great for you.
    view full answer...

  • Recommended Weight Distribution Hitch For A Jayco TrailI have a Jayco 17z dry weight around 3300 ,
  • No matter what all weight distribution hitches will make noise when in use. Some will make less noise than others but it will always be there. With you Jayco trailer weighing 3,300 pounds dry the tongue weight will be about 10% of the weight when loaded. I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0600. I like this weight distribution hitch over the others that we offer because they have integrated 2 point sway control that will limit side to side movement,...
    view full answer...

  • Troubleshooting Time Out Error LCI Level Up System
  • If the touch pad is showing "Retract Time Out Error" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert.
    view full answer...

  • Solution for Needing Replacement Roof Vent Lid for 1968 Forester Camper
  • I wish we could help but we don't carry the Luma Dome roof vents or their lids so we can't help with just that. Best option we have would be an all new roof vent like with the Ventline Ventadome part # V2029SP-28.
    view full answer...

  • 2013 Jeep Wrangler Base Plate Kit Fitment with Roadmaster Stowmaster Tow Bar
  • Thanks for the photo! It looks like your 2013 Jeep Wrangler has a standard bumper from the factory so you'll need the Roadmaster Crossbar-Style Base Plate Kit # RM-521448-4 to fit with your Roadmaster StowMaster Tow Bar # RM-501. I've attached an installation video of this base plate kit on a 2013 Wrangler for you to check out as well!
    view full answer...

  • Comparing Kuat Transfer 1-Bike Add-On Kits For V1 and V2 Bike Racks
  • The 1 Bike Add-On # KU57FR allows you to add an additional bike to the Kuat Transfer V2 Bike Racks 1-Bike # KU64FR, 2-Bike # KU84FR or 3-Bike # KU24FR racks. The 1-Bike Add-On TSAOB is for the previous V1 version of the Kuat Transfer. The mounting connections are different between these 2 racks as it was upgraded to be more robust with the V2.
    view full answer...

  • Will the Bolt Trailer Coupler Lock Fit on a Demco Trailer Coupler?
  • Yes, the BOLT Trailer Coupler Lock # BL7032493 will fit with a Demco 2-5/16" trailer coupler. I have included an image below showing the lock used on a Demco coupler so you can see the fit with that style coupler.
    view full answer...

  • Recommendation For Hauling Two Mobility Scooters
  • While there aren't any cargo carriers that would fit two mobility scooters or even be able to handle the weight of two, you do still have the option of using a trailer like the Detail K2 Mighty Multi Utility Trailer # K2MMT4X6. The loading gate isn't the best for a mobility scooter so I recommend getting some loading ramps # 288-07474-2 as well. You can use some tie-down straps like # EM04418 to secure your scooters to the trailer.
    view full answer...

  • Recommended Weight Distribution System for 5K Forest River Shamrock Trailer
  • I recommend going with the Blue Ox TrackPro Weight Distribution w/ Sway Control part # BLU47FR on your 5,000 lb trailer. This system is rated for up to 8,000 lbs so it will give you more room for error whether you want to upgrade trailers down the road or add more weight to your existing. It has integrated sway control so it will help with passing trucks or windy passes. It comes with a shank that will allow for a rise up to 6-1/2" and a drop down to 1-1/2". In order to see what your rise/drop...
    view full answer...

  • Is There a Tool Needed to Install Rubber Top Lip Wiper Seal for RV Slide Out - Press On
  • I do have an option for you but there isn't really a specific tool needed for the Rubber Top Lip Wiper Seal for RV Slide Out part # SR23VR. It features a simple press-on installation so there will be no tool needed for this. That said, I could see how removal would be a bit more challenging, if you just simply pulled up on the top of the seal you would likely tear it so it might help to use a pry tool and lift up at the bottom of the seal where it's pressed onto the flange. In which case,...
    view full answer...

  • How To Wire Firestone Air Command Compressor System With or Without Yellow Wire
  • The Air Command Compressor System part # F2610 can be wired in one of two ways. The first way would be to just attach the red wire to the positive battery terminal and the black wire to the negative battery terminal. This would allow the system to be powered on whenever you wake it up with the app. The other way would be to also attach the red wire to the positive battery terminal and the black wire to the negative battery terminal but also hook up the yellow wire to a keyed ignition source....
    view full answer...

  • Is There an Underbed 5th Wheel Hitch for a 2021 Ram 2500 with RamBox
  • I do have an option for you but we don't offer any underbed mounting solutions for a 2021 Ram 2500 with RamBox. Instead, I recommend the B&W Patriot 5th Wheel Trailer Hitch part # BWRVK3255 with the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part # BWRVK2602. This is an excellent setup that will provide you with a quality hitch and a mostly bolt-on install kit. It will work great with the Curt Turning Point when used with the Custom Wedge for B&W Fifth Wheels...
    view full answer...

  • How to Transport a 65LB E-Bike and a 55LB Recumbent E-Trike
  • I do have a solution for you as previously Hollywood Racks used to have an adapter which could be installed on some of their bike racks which would allow you to also carry a trike with a standard bike. This product was discontinued in 2021 and I do not see any other manufacturer with a product that will work with your bikes. The solution I have for you is to tow a small Utility Trailer # K2MMT4X6 when you need to transport your bikes. This trailer has a 4' wide by 6' long bed and a 3' long...
    view full answer...

  • Can a 2008 Mitsubishi Lancer Be Flat-Towed
  • I checked out the owner's manual for a 2008 Mitsubishi Lancer and according to this, the vehicle can only be transported on a tow dolly. The only models we offer a tow dolly for are front wheel drive as these can be towed from the front with the front wheels off the ground. The other models will either need to have the rear wheels or all wheels off the ground. I recommend checking out page 6-23 if you need further clarification. For a tow dolly, I recommend the Roadmaster Tow Dolly with...
    view full answer...

  • Will The Base Rail Kit From A 2015 Ford F-250 Fit A 2015 Ford F-350 Dually
  • The frame brackets for the base rails are different between a 2017 F-250 and 2015 F-350 so the only component of your base rail kit you could possibly reuse would be just the outboard rails. That being said not all rails will match all brackets so you could run into fitment issues if you purchase just new brackets and try to reuse the outboard rails. The hardware could've also changed between the models as well so it's best to just get a whole new kit just to ensure you have everything...
    view full answer...

  • Parts Needed to Install 7-Way and Brake Controller on 2006 Dodge Dakota
  • The first thing you need to install is a 4-way on your 2006 Dodge Dakota which for that you'd want the Tekonsha part # 118323 and you'd be set. Then to convert the 4-way to a 7-way you'd need the part # ETBC7 which also comes with everything needed to install a brake controller like our very popular P2 part # 90885. The # ETBC7 will also allow you to have a 4-way as well.
    view full answer...