Will the Bolt Trailer Coupler Lock Fit on a Demco Trailer Coupler?

Question

Question:

Will the Bolt Trailer Coupler Lock work on a Demco 2-5/16 trailer coupler?

asked by: Thomas A

1

Helpful Expert Reply:

Yes, the BOLT Trailer Coupler Lock # BL7032493 will fit with a Demco 2-5/16" trailer coupler. I have included an image below showing the lock used on a Demco coupler so you can see the fit with that style coupler.

expert reply by: Bud M

1

Bolt Coupler Lock On Demco Trailer Coupler
(click to enlarge)

Answer 1

To prevent any fitment issues with the lip of your coupler the best choice is a lock like the Reese Tow and Store Lock Kit #RP7014700. The ball will sit up inside the coupler and the latch bolt will wrap around the top of the coupler. It can fit…

view full answer...

Answer 2

I recommend going with the BOLT style locks. These locks will allow you to set any number of locks to the same key as your 2023 Chevrolet Silverado 2500. The BOLT Trailer Hitch Receiver Lock #BL7023582 will fit your 2-1/2" receiver and we have…

view full answer...

Answer 3

The best surround style trailer coupler lock we offer for the square style trailer couplers is the Fastway Universal Trailer Coupler Lock part #FA86-0015-318 because of the long u-bolt which will accommodate a much taller coupler head like those on…

view full answer...

Answer 4

If someone was willing to attack the BOLT Trailer Coupler Lock #BL7032493 with bolt cutters they were most likely pre-meditating stealing yours or someone else's trailer. What these devices are mainly designed for is stopping the opportunist…

view full answer...

Answer 5

There are two different size cone's with the BOLT Trailer Coupler Lock part #BL7032493. The small cone is for 1-7/8" and 2" trailer couplers whereas the large cone is for 2-5/16" trailer couplers. There are several different types…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Will the Bolt Trailer Coupler Lock Fit on a Demco Trailer Coupler?

Product Page this Question was Asked From

Continue Researching