I have a solution for you, but there is not a plug for a brake controller that would allow for a plug and play installation on the 2018 GMC Acadia Denali, so even if you've got the factory trailer connector you would need to hard wire any controller in.
For this reason I typically recommend using a wireless brake controller like the Curt Echo # C51180, which simply plugs into your 7 way trailer connector and uses gyroscopes to apply the brakes on your trailer in proportion to the braking... view full answer...
We have everything that you need to start towing with your 2020 GMC Acadia!
I recommend using the Draw-Tite Trailer Hitch # 76023 because it mounts behind the rear bumper and has a very clean look with the lower panel removed. Then for wiring I recommend pairing the T-One # 118276 with the Hopkins # HM40975 which gives you a plug and play wiring kit with both 4-Way and 7-Way connectors. I have linked installation videos of the trailer hitch and wiring on a 2019 Acadia that you can reference.
To... view full answer...
We can help you with selecting the items required to ready your 2013 GMC Acadia for flat towing behind your motorhome that does not have air brakes. In fact the linked article on flat towing is a great place to start since it covers each component, which include the tow bar, safety cables, a wiring/lighting solution, a high/low hitch adapter and both base plates and a braking system for the toad. Articles on these last two components are also linked.
You'll also want to check your GM... view full answer...
It sounds like you're looking for a way to power something in your dinghy vehicle, like a supplemental braking system. A system like the Blue Ox Patriot # BLU37TR requires that you install the Roadmaster 12V Outlet Kit # RM-9332, which connects directly to your battery to supply 12v power inside the vehicle when it is turned off- not with the key in the ACC position. There are some additional parts you would need to avoid draining your 2017 GMC Acadia's battery while it's being flat towed-... view full answer...
Cross bars are recommended when installing Thule Interstate Expandable Roof Rack Cargo Bag, item # TH869. The cross bars keep the bag from sliding forward and back on the vehicle roof during acceleration and braking and protect the vehicle roof from damage by keeping the bag stationary when installed. Make sure to clean the roof before installing the bag to keep dirt, between the bag and roof, to a minimum so the roof does not get scratched.
Cross bars for your 2009 GMC Acadia consist... view full answer...
If you are just wanting an adapter for your 2019 GMC Acadia then you can use the Tow Ready # 20036. This connects to your 4-Way and then you wire the 5th (blue) wire to your reverse light circuit.
For a more permanent option you can install the Hopkins # HM47900. This gives you a 5-Way that can also be used with most 4-Way connectors as well.
I have attached an installation video of the adapter for you to check out. The installation of the 5-Way will be similar so the video will be beneficial... view full answer...
We have the perfect trailer hitch that is confirmed to fit your 2023 GMC Acadia!
The Curt Trailer Hitch Receiver # C13293 has a bolt-on installation with no welding required. It has a gloss black powder coated finish that is over a protective base coat that offers superior rust resistance.
The trailer hitch has a maximum gross trailer weight up to 5,000 pounds and has a maximum tongue weight up to 750 pounds. I would recommend checking your vehicle's manual to find the proper towing... view full answer...
You're looking for the Tekonsha T-One # 118720, which will provide you with a 4 way plug to be used on your 2019 GMC Acadia and the Curt # C13293 hitch. This harness will tee into your existing wiring with a single plug, so it's super easy to install- I've attached a video of the installation process for you to have a look at, as well.
If you don't already have a ball mount and hitch ball, the etrailer Ball Mount Kit # 989900 provides you with 2 ball mounts that will allow you to cover... view full answer...
When installing a trailer hitch on your 2023 GMC Acadia for either towing a trailer or hauling a bike rack we have the perfect hitch for you.
We have two options on trailer hitches that are confirmed for your vehicle. We have The etrailer Trailer Hitch Receiver # e36AR and we have The Curt Hitch # C13293. Out of the two hitches I recommend choosing the etrailer hitch # e36AR over the Curt hitch because the etrailer hitch has a matte black powder coated finish and has an extra coating... view full answer...
The Roadmaster EZ Crossbar Style Base Plate Kit # 523149-1 is confirmed to fit your 2012 GMC Acadia Denali. This base plate does have removable arms allowing for a clean hidden appearance when not being flat towed. This will require a Quick Disconnect Crossbar Assembly # 910021-00 to connect to the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676. This is their best selling tow bar thanks to the accent lighting and clean looks with the integrated cable guides for the safety... view full answer...
A complete flat towing system consists of base plates, a compatible tow bar, safety cables, tow bar wiring, supplemental braking system and often times a high/low adapter to allow you to keep the tow bar level during towing.
Starting with the base plate, I recommend using the Roadmaster # RM-523189-4 which has removable arms that can be removed when you're not towing; a compatible tow bar with these base plates is the Roadmaster Falcon 2 # RM-520 which will install directly into the 2"... view full answer...
I checked with Roadmaster to determine the exact fuse bypass switches you will need for a 2012 GMC Acadia, and the part you mentioned, 76517, is correct. The switches you need are:
- Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles - 50-Amp FMX Fuse # RM-76517
- Quantity of 2 of Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse # RM76511
I have added links to videos and installation instructions for you to check out as well. view full answer...
We can help you ready your 2011 GMC Acadia AWD for being flat towed behind your motor home. A great article that covers all the needed items is linked for you.
I checked the GMC online owner's manual for your Acadia and on page 10-88 it indicates the AWD version can be flat towed. Be sure to follow all of the preparations steps outlined in the manual each time you tow.
Since you have a Blue Ox tow bar I suggest staying with Blue Ox baseplates as this avoids the added cost and complexity... view full answer...
That should be everything you need if both your 2008 GMC Acadia and 2003 Chevy Silverado are equipped with tow packages. You would order part # 90185 and vehicle specific wiring adapter # 3026-P and that would include everything for your Acadia. Then you would order part # 3015P and # 7686 to have a connection wire and bracket for your Silverado.
Please note, you will need to go through the set up process and adjust the power and boost settings when you switch vehicles as the two vehicles... view full answer...
For a complete towing setup for your 2017 GMC Acadia, you're going to need a base plate, a braking system, a tow bar, tow bar wiring, and a high-low adapter.
For a base plate, I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-523189-5. This base plate kit is simple to install, easy to use, and will provide your vehicle with a nice, clean look when not in use.
Following a base plate, you'll need a tow bar that is compatible with the base plate, and will be able to support the... view full answer...
Yes, you can tow your 2016 GMC Acadia. You will need 5 components however, to safely and correctly tow your GMC Acadia.
To start you will need a base plate kit, the Roadmaster EZ Crossbar Style Base Plate Kit # 523149-1 is an excellent choice that will feature Roadmaster's crossbar-style brackets to provide attachment points for the quick-disconnect crossbar on your tow bar.
Next, you will need a wiring kit, the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 will... view full answer...
If your 2009 GMC Acadia has a factory 7-way connector at the rear of the vehicle, you will need to use the Tekonsha Wire Replacement, part # 3026-P. This connector works with Tekonsha brake controllers, like the Prodigy P2 Brake Controller, part # 90885.
If your 2009 Acadia does not have a factory 7-way, you would not use the # 3026-P Teknonsha Wire. Instead, you would need to use the Brake Controller 7 and 4 Way Installation Kit, part # ETBC7.
To install the # 3026-P connector, one end... view full answer...
To determine the minimum crossbar length needed will really depend on how tall the Kayaks you have are.
For instance, if your kayaks were 14" tall, you'd need a minimum of 42" across your roof in which something like the:
-Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 with the legs # RRSX100, would work great.
This crossbar setup is confirmed to fit your 2019 GMC Acadia with factory roof rails, measures 46" wide, and has a maximum weight capacity of 165-lbs.
If you let me know what... view full answer...
The Electric Trailer Brake Kit - 10 inch - Left and Right Hand Assemblies - 3,500 pounds # AKEBRK-35 is the correct brake set up for your Kelsey Hayes 602027 and 602028 and even though your trailer is rated for 2,750 pounds the 3,500 pound brakes will work.
The driver's-side and passenger's-side electric brakes measure to be 10 inches by 2-1/4 inches. The brake pads are made of a durable friction material which provide an improved braking and longevity.
The brakes have an e-coated backing... view full answer...
Go To Results