The MORryde RV Fridge Tray # MR69UR only latches into the closed position. Since the latches were placed on the front edge of the extendable tray they have no way to latch themselves when fully extended. If you wish to have a way to keep the tray extended I recommend having a small dowel rod cut to length which you can use to prevent the tray from sliding back in. view full answer...
While there aren't any specific jacks that fit your 2019 Winnebago View, or electric stabilizers for the front, the best option we can offer are stabilizing scissor jacks which you can put on the underside of your frame. These can be bolted or welded onto the frame, and the best option is the 6,500 lb pair:
- Ultra-Fab Ultra Scissor Jacks # UF48-979002
I have added a link below to a video review for you to check out as well if you'd like to take a look. view full answer...
The etrailer eDream Deluxe RV Mattress # e84FR is double-sided to allow you to choose between plush and firm sleeping surfaces. You can flip the mattress over for either side, depending on your personal preference. If you choose the "Plush" side you'd be getting a soft firmness level and for the "Firm" side a hard firmness level.
If you're looking for a more medium firmness you would want to get the # e94FR or # e97FR instead. view full answer...
There isn't a part number for the feet (or grommets) because they are not sold as replacement parts for the Camco RV Universal Fit Stovetop Silencer and Countertop # CAM43571.
So there isn't anything designed specifically as replacements for this cutting board, but if you don't want to buy a new one, what may work are the Camco Magic Chef Stove Grommets # CAM43614.
They are for a Magic Chef grate but could work out for what you need, and would be the closest that is available to replacements... view full answer...
Yes, you can use a 2-inch hitch extender when using the Swagman E-Spec # S94FR. The shortest 2-inch extender we carry is the Hitch Extender For 2" Trailer Hitch Receiver 7" # HE06. Added with the shank length of the E-Spec, it will give you a total length of 17-1/2 inches from the center of the hitch pinhole to the closest part of the rack (when folded up).
It is important to note that using a hitch extender will reduce the maximum weight capacity of your trailer hitch by 50%. view full answer...
Good questions, and the chatter you are hearing is really about moisture getting in and affecting the circuit boards, but I can tell you with all honesty that is not just a MaxxFan thing; it's something that can and will happen to RV vents, including Fan-Tastic vents. I haven't had dealings with Airxcel's customer team to give any feedback in that regard, but between the Fan-Tastic and MaxxAir, if it were up to me I would go with the MaxxFan:
- MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat,... view full answer...
There is not a standard air pressure for all ST205/75D15 trailer tires as the different load ranges will require different air pressure. They could also very well vary from manufacturer to manufacturer. However, the air pressure rating for a trailer tire will be listed on the sidewall as "max tire pressure". This is going to be the air pressure you need to fill the tires to while cold. There is however one exception to this rule, the Goodyear Endurance which uses a tire fill chart based... view full answer...
The Progressive Dynamics RV Power Control Center # PD4135K comes with an internal Charge Wizard like part # PD92201. The # PD4135K has an indicator light just like the Charge Wizard does, which displays the charging mode that the converter is in:
On: Boost Mode (14.4V) — Constantly monitors battery for voltage drop and quickly recharges battery or boosts power when needed.
Fast Flash: Normal Mode (13.6V) — Continually monitors power usage, provides good charging capability and reduces... view full answer...
The rung spacing on center is 12 inches for the Stromberg Carlson Exterior RV Ladder - Aluminum - 99-1/2" Tall - 250 lbs - Black # LA-401BA. view full answer...
The Peterson Magnetic Tow Lights - 4-Way Flat Connectors # PE26UR have a strong magnet. They don't have any weight rating or capacity rating. They have been tested at highway speeds with various weather conditions to stay firmly in place on your towed vehicle's exterior. You can remove them by hand, and they take a little strength to remove, but you do have to be purposeful for them to come loose.
I've attached an article on these style magnetic lights to assist. view full answer...
For starters, on a motorhome like your 2007 Winnebago Aspect there are usually two different VIN's, one for the chassis and one for the body. In regards to the body, the online trailer VIN decoders are not always an exact representation of the trailer. They are a good guide that can be helpful but there very well may be some discrepancies. With that being said, the 10th digit of a trailer VIN represents the year and the number "6" represents 2006.
However, that does not necessarily mean... view full answer...
I believe you are asking for a dual-handle tub and shower diverter faucet that has a D-spud outlet that lets you attach a handheld shower set (a hose leading up to the shower) and we do have those available. For example you could use the following if it is the style you are looking for:
- Phoenix Faucets Catalina RV Tub and Shower Diverter Faucet with D-Spud # PF223403
I have added links below to a video reviews of this part as well as a link to our entire selection of these in case you... view full answer...
The Blue Ox KarGard Towed Vehicle Protector # BX8870 will absolutely hold up in the Colorado crosswinds and there are a couple of reasons why.
The first is that the KarGard is designed from what is called polyethylene, which is a thermoplastic that allows it to be flexible and thus more aerodynamic as you drive. The other reason is how securely it attaches to your tow bar. The KarGard # BX8870 secures to your tow bar with U-bolts and a locking rod that will keep it firmly in place.
I... view full answer...
The weather guard on the Solera RV Window Awning Fabric and Roller, # LCV000335058, is the black section of material at end of fabric. This is what will be exposed when rolled up. view full answer...
A standard single cylinder deadbolt designed for a home should not be used on your RV because it likely will not fit as they are designed for doors of different thicknesses. The Valterra Deadbolt Lock for RVs - Single Cylinder - Stainless Steel - 5/8" Throw # L32CS3008 or 1" Throw # L32CS3108 are definitely what you want to use so long as your door measures 1-3/8" to 1-3/4" thick, which is what many RV doors are. There isn't really a comparison in general I can make due to the amount of... view full answer...
The Gustafson 12V RV Vanity Light w/ Shades # 277-000324 is just held in place with a few screws so you can mount it any direction you want. view full answer...
There was little info about that specific inverter I could find, other than it is a 130 watt inverter. The closest we have to that is a 200 watt pure sine wave inverter, the Go Power Industrial Pure Sine Wave Inverter - 200 Watt - 12V # 34282690.
This unit is 7-7/16" long x 5-15/16" wide x 2-11/16" tall, which should allow it to fit the same space as your current inverter. view full answer...
The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount, part # HLY64FR, is the HR1700 model. I have included a video review link below. view full answer...
Go To Results