Yes, since the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 is designed to work with 2" trailer hitches and the Roadmaster Anti-Rattle Hitch Extender for Tow Bars # RM-071-1075 is a 2" hitch accessory, the two will be compatible. view full answer...
Hey Scott,
With the majority of dual hitch receivers being specifically for flat towing or not being compatible with weight distribution hitches you'd have to use a Gen-Y stacked receiver like the Gen-Y # 325-GH-624 (2-1/2" trailer hitch) or # 325-GH-1724 (3" trailer hitch). This would have the capability to handle to workload from the trailer as well as create enough space to mount a bike rack or any other hitch mounted accessory that you need to haul. Most other adapters also reduce... view full answer...
The hitch from the "More Information" link is the same Curt Trailer Hitch Receiver # 13440. It is true that it won't fit if you have the factory hitch in place. However, Curt has confirmed it will fit if you remove the OEM hitch from the vehicle. Since you're looking for a hitch I'm assuming you want to replace the factory hitch on your 2006 Sequoia so removing the old one shouldn't be an issue. view full answer...
Hey Chris,
Yes, the trailer hitches you're seeing (listed below) are a confirmed fit for all models of the Kia Sportage from 2023 - 2024.
Draw-Tite Max-Frame Trailer Hitch Receiver # DT22MR
Curt Trailer Hitch Receiver # C94WR
etrailer Trailer Hitch Receiver # e38KR
Of the three I recommend the I recommend the Curt # C94WR. It's a bit slimmer than the Draw-Tite and will have less potential to hold onto dirt and debris that could end up corroding the paint. view full answer...
Hi Nancy,
The EcoHitch Hidden Trailer Hitch Receiver # EH35VR is going to be the only compatible trailer hitch that can accommodate a full size tire. This trailer hitch has a 5,000lbs gross towing capacity and 750lb tongue weight capacity, but you should still doublecheck the vehicle's capacity in the owner's manual. I've attached a short video below where Ryan will walk you through the installation process. view full answer...
Hi Marcus; thanks for the question and while we have a trailer hitch fit for your 2013 BMW X5 with the M-Sport package, I checked with Draw-Tite and their hitch is not a fit. Instead, what you will need is the Curt Trailer Hitch Receiver # 13077.
I checked with Curt and this hitch is a fit for all models, and we have also had customers successfully install the # 13077 on their M-Sport models. view full answer...
Hey Jerry,
There was a design change in 2022 models that made 2022 - 2024 models require a different trailer hitch so you'd need the etrailer Trailer Hitch Receiver # e27KR for a 2023 instead. view full answer...
Hi Wayne,
The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers # TLE1536 is designed only to be used with TorkLift SuperHitch trailer hitch receivers and would not be a fit with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-623. You would need the TorkLift SuperHitch Original Trailer Hitch Receiver # TLF1002 on your 2015 F-350 in order to use the # TLE1536. view full answer...
Yes it sure does; the Curt Trailer Hitch Receiver # C12030 does fit a 2015 Hyundai Tucson.
Also wanted to note that if you have this hitch and plan on transferring it from an '11 to a '15 Tucson that hardware cannot be reused as it is unsafe to use again. So if you do happen to need new hardware you can get that with Replacement Hardware Kit for Trailer Hitches # RHK. view full answer...
Hey there Ted; thanks for writing in, and there's actually just a single hitch that fits your 2017 Audi A3 e-tron, from Stealth Hitches. The correct part number for your Audi is the following:
- Stealth Hitches Hidden Rack Receiver # SH64ZR
The # SH64ZR is designed specifically for accessories only and not trailer towing, so it's perfect for your application. I really like the Stealth Hitches options as well because they ensure your Audi completely maintains its factory look when you... view full answer...
Hey Cameron, I recommend checking out the Multi-Fit Motorhome Trailer Hitch # 5350. This is a multi fit trailer hitch that will fit chassis 24" to 46" wide so it'll work perfect with your 43" wide chassis.
This hitch is compatible with a weight distribution system, has a max weight capacity of 5,000 lbs, and has a max tongue weight capacity of 500 lbs. view full answer...
The EcoHitch Hidden Trailer Hitch Receiver # 306-X7311 will fit your 2015 VW Jetta Sedan with the TDI engine. There is not going to be a difference between your TDI and the other Jetta models for this receiver.
The 4-Way # 118572 will allow you to connect to small trailers you might need to tow. And it will allow you to run Auxiliary Lights # C53201 should you have a hitch mounted bike rack or other accessory rack which could impair the view of your Jetta's tail lights. view full answer...
Hey Sal, yes I can guarantee that the etrailer Trailer Hitch Receiver # e27KR will fit your 2024 Honda Pilot. We have actually installed this very hitch on a 2024 Honda Pilot which I've attached to this answer, for you to check out. view full answer...
Hi Chuck,
While we do have a trailer hitch that fits your 2024 Mazda 3 hatchback, I checked with EcoHitch and their # EH23VR is only a fit for the sedan. What I recommend instead is the Curt Trailer Hitch Receiver # C98BR. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR is the same thing as the 76527 hitch you already have so If it didn't fit it's not going to work.
Instead, I'd recommend going with the Curt Trailer Hitch Receiver # C76WR which we have listed as a fit for your 2024 Ford Bronco. view full answer...
Hi David!
The only hitch receiver size available on aftermarket hitches that fit your 2023 Volkswagen ID 4 use a 2" receiver. I know Thule can be a bit restricting when it comes to what they allow to be used with their bike racks so if you can let me know what rack you have and/or send in some photos I can see if we have a way to make your bike rack compatible with a 2" hitch that won't void the warranty, otherwise you'll have to use an adapter like the Trailer Hitch Receiver Adapter #... view full answer...
Hey Paul, thanks for reaching out!
The EcoHitch Hidden Trailer Hitch Receiver # EH66SR that fits your 2024 Ford Mustang Mach-E weighs about 41-1/2 lbs. view full answer...
Yes, the Draw-Tite Front Mount Trailer Hitch Receiver # DT44HR will fit your 2024 GMC Sierra 1500 with the 3.0L Duramax diesel with the max trailering package. view full answer...
Hey Dave, check out the Curt Trailer Hitch Receiver # C11091. This hitch is confirmed to fit your Volkswagen Passat, has a class I opening, a max towing capacity of 2,000 lbs, and a max tongue weight capacity of 200 lbs. view full answer...
No, there is not a Toyota Prius trailer hitch that will also fit your 2015 Lexus CT 200h. The Curt Trailer Hitch Receiver # C11276 for the Toyota Prius will fit the following model years:
2010 - 2015 Toyota Prius
2012 - 2015 Toyota Prius Plug-in Hybrid
2012 - 2017 Toyota Prius v
If you are in need of a hitch for your 2015 Lexus CT 200h you will need the Curt Class 1 Hitch # C11200. You will find our install video linked below. view full answer...