The Stealth Hitches Hidden Rack Receiver item # 391SUOB20 you selected will not fit your 2020 Subaru Legacy. The closest equivalent hitch receiver that is compatible with your 2020 Legacy is the EcoHitch Hidden Trailer Hitch Receiver item # EH36RR. This is a custom fit hitch with a concealed cross tube that has a 300 lbs max tongue weight and a 3500 lbs towing capacity. view full answer...
I spoke with my contact at Draw-Tite and yes, Trailer Hitch, #75673, will fit a 2015 Subaru Legacy with dual exhaust. You will just need to temporarily lower the exhaust system on both sides on the vehicle by removing the two rubber isolators from the muffler hangers and one below rear axle. Spraying the hangers will allow for easier removal. view full answer...
The Draw Tite Hitch part # 36493 that you referenced is also a 1-1/4 inch hitch so your Thule Roadway part number 912XT that is designed for a 1-1/4 inch hitch would work well in it.
I attached an install video for the hitch for you to check out as well. view full answer...
I have great news! I double-checked with Rhino-Rack and confirmed that the following roof rack will fit your 2017 Subaru Legacy with a bare roof:
- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long # RRVA126B-2
- Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points # RRRLKVA
- Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK416
With this roof rack setup, you receive up to 165 pounds of maximum weight... view full answer...
Yes! The Malone AirFlow2 roof rack # MPG215 will fit the factory side rails on your 2004 Subaru Legacy GT Wagon. The roof rack will clamp to the side rails. I have linked a video showing how it works.
Your order could ship for free. You can see shipping options after adding items to the cart or by contacting our customer service team. view full answer...
The ball cams for the older NV and the NV 2.0 are not interchangeable, so there isn't a way to utilize the ball cam for the 2.0 in your older NV. So if you wanted to utilize the very handy foot lever feature you would need a different bike rack. Each of the Kuat options do have the foot lever so you can go with any of the following:
- Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Metallic Black # NV22B or Gunmetal Gray # NV22G
- Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 2" Hitches -... view full answer...
I have another solution for you but the Thule Passage 3 Bike Carrier # TH911XT will not fit your 2021 Subaru Legacy.
As an alternative you can use the Yakima HangOut 3 Bike Rack # Y02638 which is essentially the Yakima version of the Passage. This fits your Legacy and is compatible with a child's bike if you use an adapter bar like part # Y02531 which is the case for any hanging-style rack and a child's bike.
If you wanted something a little nicer you can jump up to the Yakima FullBack... view full answer...
The hitch you have is actually a Draw-Tite hitch # 75673 for your 2018 Subaru Legacy. It looks like in your picture the distance from the center of the hitch pin hole to clear the rear bumper is about 6 inches. That is consistent with what we have found when installing the hitch (see video link).
When folded up the Kuat Transfer # KU74FR measures 6 inches from the center of the hitch pin hole to the nearest part of the rack so it will not extend out far enough to clear the rear bumper... view full answer...
Yes! The Rhino-Rack Nautic Roof Kayak Carrier w/ Tie-Downs # RR571 is compatible with the Rhino-Rack 2500 Roof Rack DS126B and the DK Fit Kit # DK416 on your 2017 Subaru Legacy. Since the Nautic Kayak Carrier fits square crossbars up to 3-7/8" wide x 1-3/8" tall, you are good to go! view full answer...
Curt trailer hitch # C12290 will fit the 2018 Subaru Legacy. We know this because the larger Class III hitch, # 13390, fits both the 2017 and 2018 Legacy and the smaller Class II, # C12290, installs in the same way as the Class III. I couldn't say why Curt lists it the way that they do.
But given the option I would go with the Class III, # 13390, since it is a more capable and sturdy hitch that will afford you many accessory options.
If you are going to use a hitch for an accessory such... view full answer...
Yes, you can use the Inno XS200 feet, # INXS200, on a 2015 to 2017 Subaru Legacy sedan. In addition to the feet you will also need the bars, # INXB115-2, and the custom fit kit, # INK439. I have linked a video showing the features of this style of Inno roof rack on a different vehicle. view full answer...
Since the wheel on the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel # AM31242 is a lug centric wheel, it won't matter that the pilot diameter of the wheel doesn't match with the hub since the lugs will center the wheel. This wheel has the 5 on 4-1/2" bolt pattern and 1/2" studs that will work with the hubs on your trailer. view full answer...
After confirming with Draw-Tite, I can tell you the Draw-Tite Trailer Hitch # 36284 is a compatible fit for your 2000 Subaru Legacy Wagon. It is a custom fit for your vehicle and features bolt-on installation with no welding required. It is a 1-1/4-inch trailer hitch with a max GTW of 3500 lbs and a max tongue weight of 300 lbs.
I have provided a link to the installation instructions for this hitch as well as a video showing a typical installation.
If you need a drawbar for this hitch,... view full answer...
Yes, the Titan Chain Diagonal Cable Chains # TC339DC is a confirmed fit for your 225/55R17 tires that are on your 2015 Subaru Legacy. These Titan Chains are Class S rated chains that are designed for vehicles with restricted wheel well clearance.
When purchasing tire chains it is always a good idea to consult your owner's manual. The manual will offer more information and a listing of any restrictions on the use of tire chains for your vehicle. view full answer...
I have a great hitch receiver that I highly recommend.. It is the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7384. EcoHitch has the best hitch receivers for concealability and ground clearance. The Ecohitch has a 300 lbs tongue weight capacity which will be more than enough to carry your two 70 lbs e-bikes and you won't have to worry about them being to low to the ground. This hitch receiver is compatible with Thule EasyFold XT Bike Rack for 2 Electric Bikes item # TH903202 and... view full answer...
You can absolutely use the Kuat Sherpa 2.0 bike rack with your 2012 Subaru Legacy, and all you need is the right trailer hitch in order to do so. For that, what you will need is a hitch from Draw-Tite:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 75673
This hitch is a confirmed fit for your '12 Legacy and will allow you to easily carry the Sherpa 2.0. This is an awesome choice for a bike rack and one of my personal favorites as well because not only is it one of the easiest bike racks... view full answer...
You can replace the threaded pin and clip for your Swagman XTC2 TILT Bike Rack for 2 Bikes # S64671 with part # P5902 or you can upgrade to the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 to ensure that no one can take of with your bike rack. view full answer...
I am happy to alleviate any clearance concerns about the RockyMounts Westslope 2 bike rack part # RKY10222 on a 2014 Subaru Forester with the Curt Hitch part # C13144. The Curt Trailer Hitch Receiver part # C13144 installed on a 2014 Subaru Forester measures 3-1/2" from the hitch pin hole to outermost part of the bumper. The shank of the bike rack measures 5" from the shank hitch pin hole to the closest part of the rack when folded up so you will have about 1-1/2" of clearance from the... view full answer...
You're on the right track with the right fit, but the MagnaFlow Heavy Metal Loaded # MF99034HM is not for use in the state of California.
You would instead want to use the # MF38134 which also has a 2" inlet and an oval body; this is a universal fit catalytic converter so it may require some slight modifications to your existing tail pipe length, but this has the same MagnaFlow quality as the cat you were looking at and specs that will fit on your vehicle. view full answer...
No Worries! The Thule Vertex Two Bike Rack, part # TH9028 or the 4 bike model, part # TH9029 and the Thule locking hitch pin, part # THSTL2 work perfectly with the Draw-Tite Class II Hitch, part # 36284.
I have provided links to some product demonstration videos that you might find helpful, as well as an instruction link for the Draw-Tite # 36284. view full answer...
Go To Results