The Rhino-Rack MountainTrail Rooftop Bike Carrier - Fork Mount # RBC035 is not recommended to go through a touch car wash. I recommend removing the bike rack prior to the wash which will only take a minute or two. It probably would not need to be removed on a touchless car wash but your warranty would not cover car wash damage. view full answer...
With the Thule Doubletrack Pro XT Bike Rack for 1-1/4" and 2" Hitches - Hitch Mount # TH92BJ or any other accessory, it is recommended to remove the carrier prior to going through a car wash. The manufacturer's warranty will not cover any damages incurred if you have the bike carrier installed while using an automated car wash. If it's a touchless car wash the risk is lower, but if it's a car wash with brushes then the risk is very high something would happen. view full answer...
If the car wash is a touchless car wash you'd probably be fine to leave on a roof bike rack like the RockyMounts BrassKnuckles # RKY1201 but if it's a car wash with brushes I would not recommend leaving it on. view full answer...
With the Thule Doubletrack Pro XT Bike Rack for 1-1/4" and 2" Hitches - Hitch Mount # TH92BJ or any other accessory, it is recommended to remove the carrier prior to going through a car wash. The manufacturer's warranty will not cover any damages incurred if you have the bike carrier installed while using an automated car wash. view full answer...
The Rhino-Rack Vortex Aero Crossbar System part # RRVA150B-2, part # RRRLKVA, and part # DK150 which is a fit for a 2010 Ford F150 can be left installed on the vehicle while driving through an automated car wash. However, the automated car wash must be touch-less. If the automated car wash is not touch-less then you would simply need to remove the roof rack which is very simple, just a few bolts per side. That said, this will apply to all roof racks so it is just something you must be caution... view full answer...
Any time you wash a vehicle I would recommend you remove the roof rack so that you can clean the vehicle under the feet as well as the feet of the rack. However, we realize that many people will just leave the rack on the car.
If it's a brushless car wash you could leave the rack on.
Keeping the pads clean under the roof rack is important to prevent any type of scratching of the paint there. view full answer...
The K-Source Custom Extendable Towing Mirrors # KS62135-36G that you referenced will easily be able to withstand an automatic car wash so there's nothing to worry about there. It does have detents so when folding and unfolding you'll know where to stop the mirror. view full answer...
Yes the Yakima BedRock HD Truck Bed Rack # Y01160-58 that you referenced can be left installed when the vehicle is ran through an automatic car wash. view full answer...
The # 38185-332 SM Arnold wash mop you'd looked at would be an excellent choice for those hard to reach places on your vehicle. The soft microfiber is very absorbent and won't scratch your vehicle (be sure to keep it well rinsed off).
I've linked to a product description video for you. view full answer...
For your 2017 Ford C-Max with a naked roof the roof rack I recommend is the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK357 because it installs easily, gives you aero shaped bars which minimizes wind noise, and would work great for the pop up tent application you mentioned. It also would be just fine to get through a car wash. view full answer...
The Pace Edwards Switchblade Retractable Hard Tonneau Cover part # 311-SWCA27A58 is safe to take in the car wash but please keep in mind a touch less is the way to go and Pace Edwards does not recommend waxing the cover so that step should be skipped. With the high pressures of a car wash I suspect there would be water penetration that isn't typical of the cover during normal rain events. The instructions are linked below page 6 and 7 discuss care and maintenance while page 8 covers warranty.
To... view full answer...
The BAKFlip G2 Hard Tonneau Cover # BAK26207 referenced in your question is confirmed to fit your 2017 Ram 1500 with a 5-1/2 foot bed as long as it does not have the Ram Boxes.
I spoke with my contact at BAK regarding this cover and he stated that it does have a weight capacity of 300 pounds when evenly distributed. He also says that while many people do it, they do not recommend taking the cover through a car wash. This has less to do with any water force and more to do with harmful... view full answer...
Yes you can fold the K-Source extendable tow mirrors part # KS62076G in when at a carwash like you asked about.
The best priced set that has electric and driver side heat is the part # KS62075-76GE or for fully manual part # KS62073-74G. view full answer...
Sounds like you are looking for the Truxedo Pro Tex Protectant Spray part # TX1704511 which we carry and offer for online purchase.
Your soft Truxedo tonneau will do just fine with rain and being ran through a car wash. It was designed to withstand water and rain. view full answer...
Yes, you can leave a roof rack on your 2019 Hyundai Santa Fe installed for as long as you like. However, I would only use touchless car washes with the rack installed as there is a possibility that a non-touchless car wash could potentially cause damage. In regards to the panoramic roof, so long as it does not extend up above the roof line you should be fine but please keep in mind this can be very noisy.
For your 2019 Hyundai Santa Fe, I recommend the Rhino-Rack RVP Roof Rack for Fixed... view full answer...
The Chevy Bowtie LED Lighted Trailer Hitch Cover # RP86530 referenced in your question features a corrosion resistant plastic construction but because it also connects to the 4-Way wiring connector on your truck I do recommend removing the cover before going in for a car wash.
This isn't necessarily related to the cover being waterproof or not but is more of a precaution that you will want to take with any electrical connection when there is going to be exposure to a lot of water. This... view full answer...
The best way to ensure the graphics on your new trailer stay crisp and sharp is to make sure you always have a good coat of wax on the trailer. This coat of wax is going to act as a protectant which will shield the graphics/decals whether they be paint or vinyl from the sun's damaging UV rays which is what cases them to fade over time.
The best wax we offer for the above purpose is going to be the Griot's Garage Liquid Gloss Poly Wax part # 34910969. I recommend you apply a good coat... view full answer...
For your 2018 Nissan Titan XD I recommend the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers # RRVA180B-RRRLT600.
The kit comes with 4 quick mount legs that mount in the track system of your XR tonneau and create mounting points for the crossbars.The bars are 71" long so you'll have plenty of room to mount up some bikes or any other gear you're taking with you. Like most roof racks the bars do have a slot on top for accessories to be mounted,... view full answer...
The part number you mentioned is the Subaru/Thule Aeroblade crossbar so for a replacement rubber strip you would need the part # TH69JH. view full answer...