Keepers are basically metal prongs that are in the opening of the hook on the ends of the straps that act as a mechanism that helps secure the strap to the surface that they attach to. A lot of times when you are trying to use ratchet straps it is difficult to keep the hook of the strap from popping out of place when ratcheting. The keepers help prevent that by putting a little tension in the hook so it stays in place. See the picture to the right for more clarification.
We can offer you... view full answer...
Currently the ShockStrap E-Track Ratchet # 297-20ETBB are our only ratchet straps that are white in color. The Erickson Ratchet Tie-Down Straps # EM31353 are silver in color. view full answer...
Currently the Retractable Ratchet Strap # Q74FR is our longest at 27' long. This does use 2 flat hooks on each side of the ratchet and is rated for a safe working load of 3,300lbs per strap.
If you are looking for a more traditional ratchet strap the Strap # Q54FR has the smaller S-hooks on the ends of the strap. These are 12' straps with a 1" wide webbing having a safe working load of 500lbs. view full answer...
The straps on the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Oversize Spare Tire # BDW20363 are adjustable. The 2 straps that V out from the ratchet have a usable maximum length of 21" from the eyelet of the hook to the ratchet. The ratcheting strap has a maximum usable length of 24" from eyelet of hook to the ratchet mechanism.
For securing your Polaris RZR to the trailer I recommend using the Erickson Re-Tractable Ratchet Straps # 34414 as you will get better anchoring with this... view full answer...
From the point where the strap connects to the ratchet to the end of the strap is about 21-1/2 inches and from that same location to the end of the hook is about 24 inches. view full answer...
I do have a couple of options for you for the etrack mounting. We have the CargoBuckle G3 Retractable Ratchet Straps w/ E-Track Adapters - 2" x 6' - 833 lbs - Qty 2 # IMF18800-87 and the CargoBuckle Mini G3 Retractable Ratchet Straps w E-Track Adapters - 1"x6' - 466 lbs - Qty 2 # IMF103745-87.
Another option is to use the ratcheting strap you want, # EM34416, and then use an E-Track tie off ring # 59131 and hook onto it with one end of the strap.
Another option is a strap like # EM59136.... view full answer...
I went out to our warehouse and measured one of these etrailer E-Track Ratchet Straps # e29HR. The shorter strap is about 4.5' long including the ratchet portion. view full answer...
While there aren't any ratchet straps that fit directly in stake pockets of a trailer, we do have stake pocket tie-down anchors that you can use as a way to connect the ratchet straps; what you can use is the Stake Pocket Tie-Down Anchors # PK-SPTD.
Then for ratchet straps you can use something like the Bulldog Winch 13-Piece Ratcheting Vehicle Tie-Down Strap Set - 3,335 lbs # BDW20350. view full answer...
Currently we only carry the entire strap assemblies like your 1-1/2" x 7' ShockStrap Ratchet UTV Tie-Downs # 297-7RSBB-M or the 1-1/2" x 15' ShockStrap Ratchet Tie-Down Straps # 297-15RSDB with the length that you are looking for. view full answer...
I do have an option for you but Bulldog does not have a separate part for just the strap without the ratcheting mechanism that comes in the Bulldog Winch Combo Axle/Ratcheting Vehicle Tie-Down Straps part # BDW20230. To replace one of the straps from the kit you would need Bulldog Winch Combo Ratcheting Tie-Down Strap part # BDW20229. view full answer...
I checked with Kinedyne and the wheel net # 910 is a 2 inch strap but does not include a ratchet. The Erickson strap, # EM58522 does include the ratchet. view full answer...
I have a solution for you, and you can use ratchet straps to support your boat once you have it in the air. However, we do not recommend raising or lowering the boat with ratchet straps. The ratchet straps are rated for use as tie-downs, not as lifts. Additionally, there is no safe way to control the speed at which the boat is lowered with the ratchet straps.
Fulton High Performance Brake Winch # F143100. This winch is capable of handling up to 1,500 pounds and has a self-activating brake... view full answer...
I have an option that will work for you, but, the Erickson Ratcheting Tie-Down Straps # EM04418 were not designed to be bolted to the frame of a trailer. Instead, I would take a look at theRetractable Ratchet Straps for Thule TracRac Truck Bed Ladder Racks - Qty 2, Item # CBTH12 The ratchet of this product is designed to be bolted down. view full answer...
The CargoBuckle G3 Retractable Ratchet Tie-Down Straps # IMF18800 are our longest stainless steel bolt on straps at 6' long.
For a 2" wide x 10' long retractable strap we only have the Erickson Re-Tractable Ratchet Straps # EM34416. These are zinc coated for corrosion resistance and have vinyl coated S-hooks on both ends of the strap. view full answer...
No, unfortunately there is not an alternate replacement strap option other than the Replacement HideAway Cradle Ratchet Straps for Thule Bike Racks # TH536.
The Replacement HideAway Cradle Ratchet Straps for Thule Bike Racks # TH536 works with the Helium Pro (TH9042PRO and TH9043PRO), Apex XT (TH9024XT, TH9025XT, and TH9026XT), Camber (TH9056 and TH9058), and Range (TH9057). If you have a different rack, let me know because the correct replacements may be different in that case. view full answer...
Yes! We offer the Ratchet Straps for ARB Base Platform Racks # ARB28ZR. This comes with a pair of 1" wide 9' 10" long ratcheting straps which will attach to the dovetail track on the ARB Base Platform Rack. view full answer...
You can indeed use a different strap, other than # 18050, if you want to. It needs to be a rigid strap, one that doesn't stretch. A ratchet strap can work but you have to be careful not to overtighten it which could damage the vehicle or bike rack. I recommend ratchet strap # EM34423 because it retracts automatically and has coated hooks to protect the vehicle and bike rack. view full answer...