If you don't have a roof on your Polaris Ranger I suggest using the Malone Rack Pads # MPG314 to wrap around your roll cage. Then get the load extender # Y01149 to hold up the rear of the kayak. IF you do have a roof I suggest getting something like these saddle style carrier # RR581 and drill a hole in your roof and put the T-Slot through the hole and tighten it down. view full answer...
The Classic Accessories ATV-UTV Seat Cover Set for the Polaris Ranger that you referenced, part # 052963783773, is a confirmed fit for your 2013 Polaris Ranger 500 as long as it is not the XP or HD model. This washable black fabric/pvc cover set includes two seat covers and two headrest covers. view full answer...
For your tires, I recommend going with the Erickson Wheel Net, # 77314. This wheel net will accommodate your front and rear tires and they will have more than enough capacity to hold your RZR to the E-track system on your trailer.
Another items that we've found very helpful when loading ATVs and UTVs is the Erickson E-Chock, # EM09162-2. I typically try to park the UTV in the same spot over the axles to make sure I have the correct weight distribution on the trailer and these chocks make... view full answer...
RV makers don't keep track of items such as the door railings that they install on their trailers but since the Lend-a-Hand Extra Large Folding Grab Handle # AM-533 can fold in either direction it should work great for your Grand Design 385TH toy hauler. The distance between the mounting brackets is 19-1/4-inches so you can compare this to your handle mounts. If you cannot find a door stud for mounting you can locally source long bolts and a plate to provide a secure mounting point. Four... view full answer...
Yes, I checked with Classic Accessories and seat cover # 052963783773 will fit your 2006 Polaris Ranger 500. It is designed to fit 2002 to 2008 Rangers. view full answer...
To mount a Superwinch brand winch to your 2014 Polaris Ranger, you will want to use the Bulldog ATV Winch Mount part # BDW15165.
For a 3,000 pound winch you will want to use the LT3000 # SW1130220, Terra 3500 # SW1135220, or Terra 3500 SR # SW1135230.
This mounting kit is also designed to work with several other Superwinch LT and Terra winches: the LT2000 # 1120210, the Terra 2500 # SW1125220, and the Terra 2500 SR # SW1125230. view full answer...
The 11-13/16" wide measurement on the Trailair Air Ride 5th Wheel Pin Box part # LC158778 that replaces the 1621 HD pin box is standard. I was able to confirm this with the engineers at Lippert. Once you torque the bolts down the brackets on the trailer will pull in and that is completely normal. It will not put stress on the frame, replacement pin boxes are made to be a bit narrower then your brackets on the trailer so they can easily fit into place while installing. Otherwise you would... view full answer...
I do have an alternative solution you may be interested in that will allow you to install a winch on your 2001 Polaris Sportsman 500 HO. You could add a bed extender to your 2010 Toyota Tundra which will allow you to keep the tailgate down for extra space.
The Curt # C57WR extender will give you 26" of additional space with the tail gate down.
I did some research on your 2001 Polaris Sportsman 500 HO. From the numerous images I saw, I have determined that adding the Bulldog ATV Winch... view full answer...
The Classic Accessories Quick-Fit UTV Bench Seat Cover # CA18026 is designed to fit XP and HD models of a 2009 - 2019 Polaris Ranger so if your 2019 Polaris 1000 XP is a Ranger then yes, it will fit. view full answer...
The Superwinch ATV Winch Mount SW2202919 is indeed the correct kit for your 2016 Polaris Ranger 900XP. This winch mount is compatible with all of the Terra Series winches, including the Terra 3500 # SW1135220 and the Terra 3500 SR # SW1135230 AND the Terra 4500 # SW1145220. I confirmed compatibility with my contact at Superwinch. The kit includes mounting brackets, hardware, and instructions to ensure easy installation. view full answer...
The Superwinch X3 Series Winches use a rather uncommon mounting pattern of two holes spaced 3.69" apart. Therefore, you'll likely haver to drill through the mounting plate in order to secure it. You can use any winch tray such as the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches part # BDW20061R2 so long as you are okay with drilling. view full answer...
According to Bulldog winch, they are fairly positive that the # BDW15159 would work with your OEM optional bumper, as shown in the diagram I provided. It looks like the mount wold attach so that the bottom of the winch would sit about halfway up the radiator opening, right atop that horizontal bar at the top of the bumper. You'll want to look at the trim pieces alongside the radiator grill to see if the mounting holes shown in the diagram are present. I was unable to see enough in the photo... view full answer...
For your 2015 Polaris Ranger 900 crew cab we have the Classic Accessories UTV Seat Cover # 052963783773 that you referenced as a confirmed fit in the color black, but we do not have any other colors. This does fit your seat style though. view full answer...
I spoke to the tech at Bulldog Winch and the Bulldog Winch Powersports Series ATV Winch part # BDW15001 power unit 18" wire and 6' wire can be switched but you would need to open up the power unit box and actually switch the wires in the circuits and not just wire them switched. Bulldog has had a lot of issues where customers have switched the wires and burned out the relays and wiring inside the power unit.
The 2 relays can be replaced with part # BDW20101 but the wiring will most likely... view full answer...
Airaid Powersport SynthaFlow Direct-Fit Replacement Premium Oiled Air Filter # AR850-352 is a confirmed fit for your Polaris XP900. I suggest the cleaning and oiling kit # AR790-551 to keep the filter in top condition. view full answer...
Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover # CA181420 will fit your 2018 Polaris Ranger 570 just fine. Attached is a review video of this kit on a 2015 Polaris Ranger for you to check out. view full answer...
I spoke with my contact at Superwinch and he said the Superwinch ATV Winch Custom Mounting Kit, part # BDW15157 will bolt below the bumper on your 2005 Polaris 500 HO. If your brush guard is located above the bumper then it will not interfere with the winch mounting kit.
I have a coworker here who has a Polaris 500 HO with a brush guard and he said that he has a winch on the front of his and it does not interfere with the brush guard. view full answer...
The Replacement Anti-Wear Shoe Assembly part # 3371303300 for 6" or part # 3371303305 for 7" should fit the Fishers XV2 Snow Plow. However, you will need to confirm this by making sure the post diameter of 1.32" will work for you. I have attached a photo for you with some other measurements to assist as well. view full answer...
For your 2013 Polaris 500 Sportsman and winch you will need winch mount # BDW15151. I have included some links to video reviews of the winch and mount for you. view full answer...