bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Polaris RZR


  • Airaid SynthaFlow Premium Air Filter for 2011 Polaris RZR XP900 ATV
  • Airaid Powersport SynthaFlow Direct-Fit Replacement Premium Oiled Air Filter # AR850-352 is a confirmed fit for your Polaris XP900. I suggest the cleaning and oiling kit # AR790-551 to keep the filter in top condition.
    view full answer...

  • Replacement Exterior Folding Handrail for 2015 Grand Design 385TH Toy Hauler
  • RV makers don't keep track of items such as the door railings that they install on their trailers but since the Lend-a-Hand Extra Large Folding Grab Handle # AM-533 can fold in either direction it should work great for your Grand Design 385TH toy hauler. The distance between the mounting brackets is 19-1/4-inches so you can compare this to your handle mounts. If you cannot find a door stud for mounting you can locally source long bolts and a plate to provide a secure mounting point. Four...
    view full answer...

  • Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires
  • For your tires, I recommend going with the Erickson Wheel Net, # 77314. This wheel net will accommodate your front and rear tires and they will have more than enough capacity to hold your RZR to the E-track system on your trailer. Another items that we've found very helpful when loading ATVs and UTVs is the Erickson E-Chock, # EM09162-2. I typically try to park the UTV in the same spot over the axles to make sure I have the correct weight distribution on the trailer and these chocks make...
    view full answer...

  • Is It Normal For Replacement Pin Box To Measure Narrower Than Brackets on Trailer
  • The 11-13/16" wide measurement on the Trailair Air Ride 5th Wheel Pin Box part # LC158778 that replaces the 1621 HD pin box is standard. I was able to confirm this with the engineers at Lippert. Once you torque the bolts down the brackets on the trailer will pull in and that is completely normal. It will not put stress on the frame, replacement pin boxes are made to be a bit narrower then your brackets on the trailer so they can easily fit into place while installing. Otherwise you would...
    view full answer...