Yes, there is a 1-1/4" to 2" adapter. It is the Trailer Hitch Adapter item # e93YR. This one is made specifically for accessories like bike racks. It also raises your receiver up 5" which will help with ground clearance for your bike rack.
Please note that the use of any adapter will reduce your hitches capacity by 50%. The Curt Trailer Hitch item # C11831 has a 250 lbs capacity that would be reduced down to 125 lbs. You will want to make sure your bike rack and bike/s are below this. view full answer...
It looks like you have the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 installed on your enclosed trailer's existing rain gutter rails. For a different trailer that does not have these mounting rails I recommend using a track type rack system such as the Yakima HardTop SL # Y01618 since we do not have adapters to allow installing the Rack'em to a flat roof surface.
This adjustable Yakima rack uses tracks that mount to the trailer roof (not to the side edge like the Rack'em) and... view full answer...
The SumoSprings Maxim Custom Helper Springs like part # SSR-336-47-1 do indeed offer a better ride quality when compared to the SumoSprings Solo Custom Helper Springs like part # SSR-338-47 which is what I assume you are referring to. However, the SumoSprings Maxim Custom Helper Springs will only work for you if you have the standard axle configuration and not the 2" spacer (see photo).
If you do have this spacer which most Sprinters do then you will want to consider the Roadmaster Rear... view full answer...
The correct Never Fail Tandem Axle Suspension Upgrade Hardware Kit for your 2018 Coleman Light 2515RL is part # LC281285. However, this kit is more for longevity and maintenance purposes than it is for improved ride quality or anything of that nature. If you are looking for something to help with this then you would want to use the Equa-Flex Cushioned Equalizers part # LC279687 or the Road Armor Shock Absorbing Equalizer Kit part # LC696740 which both contain rubber cores to minimize chucking... view full answer...
Yes, a Chevy Silverado bumper from 1999 will fit a 2005 model. For instance, the Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31006 is a fit for both 1500 and 2500 LD trucks, but is not a fit for 2500 and 3500 HD trucks. You would need to do some custom brackets for the HD models for the 1999 bumper to fit your 2005 as we don't have a fit for a 1999 Heavy Duty truck.
If you have a the 2500 or 3500 model for 2005 you may consider the custom fit # 31013. view full answer...
Your older PD9145C charger delivers 45 amps of DC charging power at 13.6 volts DC. (For AGM batteries)
This converter/charger requires 725 watts of AC power to operate. It also needs to be on its own AC circuit.
The Progressive Dynamics # PD79RR converter/charger delivers 60 amps of DC charging power at 14.6 volts DC. (14.6 volts for charging Lithium batteries)
This converter/charger requires 1000 watts of AC power to operate. It also needs to be on its own AC circuit
Two chargers can... view full answer...
For your 4-pole trailer lighting connection you will need a Tekonsha # 18252 Hard Wire Kit. To up fit this to a 7-way connector you will need to add the etrailer # ETBC7 Install Kit. Your 4-pole connector plugs into the back of it and it then you wire the 12-volt hot, and 12-volt brakes to it. When plugging the 4-pole in the back, use some dielectric grease to keep moisture out and deter corrosion. If you don't have any order the Edelmann # 11755 two ounce tube.
Keep in mind that this... view full answer...
Thanks for the pictures! We do have a few Curt 5th Wheel Hitches with a manual slide. For your Grand Design Reflection, I recommend the Curt A16 5th Wheel Trailer Hitch item # C16521. The A16 has a 16,000 lbs capacity and the slider base will give you 12" of travel for making tight turns.
All of Curt's sliders have to use an adapter like item # C29BR to attach to your 2019 Ram 2500's puck system. If you don't want to mess around with having two different parts the B&W Companion item #... view full answer...
The SuperSprings Custom Suspension Stabilizer and Sway Control Kit item # SSA28 are great for reducing squat and sway in your 2018 Ford F-150. They have a 1,500-lbs capacity and The tapered springs provide a soft, comfortable ride even when unloaded.
The helper spring flexes with the leaf spring to limit bouncing while providing increased stability. To address the issue with your travel trailer swaying I recommend you add a weight distribution system with sway control.
I have linked... view full answer...
I suggest using the LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens # 328-K-51 it has the overall 4 inch length you need and it is 1-1/2" inches wide. view full answer...
These are good questions, and after adding the 4-way for your 2019 Toyota RAV4 Hybrid, the Vehicle Wiring Harness # 118801, use the Universal Installation Kit # ETBC7 to get a 7-way for the Curt Echo # C51180.
In regards to a charge on the trailer battery, you can only run a maintenance charge from the 7-way to your trailer battery, you would need a battery charger like the CTEK Battery Charger # CTEK56353 to actually charge the trailer battery. To provide a maintenance charge you would... view full answer...
Yes, the Voyager Rear Camera # VCMS17B is compatible with your Voyager RV Backup Camera Monitor AOM562A.
The 17B is the direct replacement for your broken 10B and has a 4-pin connector which plugs right into the monitor, which also uses a 4-pin connector so it'll work great. view full answer...
Hey Cameron, that looks an awful lot like an aftermarket puck system made by Reese. You could confirm this by either looking under the truck for some kind of label on the brackets. Or you can measure the distance between the holes. They should be 30" apart across on center and 13" front to back on center (see picture below). If this is correct it means it is a Reese underbed puck system, which has an identical footprint as the Ford OEM puck system.
What kind of trailer do you need to pull?... view full answer...
Hi Craig,
What you're experiencing is a pretty common issue for a lot of hitches and it tends to be either a lubrication issue or just an issue with the angle that the truck and trailer are sitting at preventing the jaws from fully latching. Newer 5th wheel hitches have a bit of pivot in the head to help accommodate this but it's not always enough so getting the truck and trailer on level ground will help quite a bit. With the hitch locking after you start pulling forward it sounds like... view full answer...
Hello Ron, we do have a potential option for replacing your Norcold 1200 model 12v refrigerator. Unfortunately we do not offer anything that will be a direct replacement for this unit. We do have a model from Everchill that will fit in your cutout, but it will be slightly smaller.
What we have is the Everchill RV Refrigerator # 324-000119 which fits in a 25-5/8" wide x 60-1/2" tall x 25" deep cutout.
I have heard that Samsung makes a model very similar to the Norcold 1200, but that... view full answer...
Hey Ryan!
The best grease seal replacements for your Dexter K71-305-00 are the Grease Seals 10-36 (pair) # RG06-070 which have the exact dimensions you're looking for and are the "tried and true" go-to that we carry. view full answer...
For a replacement the best option is the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS07TASF. A 9" display is not something any of our systems offer so this is as close as it gets at 7". The full dimensions of the monitor are 7-7/16" wide x 4-15/16" tall x 1-3/16" deep so you will need to find a way to fill the remaining space. You can also fill the space completely/leave your old monitor in place and mount the new monitor in a different location using the stand... view full answer...
Jim, the Odor1 Refresh Premium Odor Eliminator Kit for RVs 25' to 44' Long # DR28FR comes with 2 complete kits which will work with an RV up to 44' long. view full answer...
Hey Phil, I think I found what you're looking for but unfortunately it looks like the wiring harness has been discontinued since what looks like 2021 which is probably why you can't find the video.
Similarly I've found the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM40615 which is available still but there is no install video for it but it's pretty easy to install.
All you'll need to do is plug into your vehicle's wiring harness which located... view full answer...
Yes, we do install hitches here at etrailer. If you live in or near Wentzville, MO we would be happy to install a hitch like the # e93ZR along with the # C44ER you were looking at on your 2023 Nissan Rogue. I have added some installation videos below where we installed these for some of our customers.
If you aren't nearby, we also have a network of dealers who can install the parts for you. I have attached an additional link below which will take you to our dealer locator, all you need... view full answer...
Go To Results