bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Mercedes-Benz


  • Correct Braking Assemblies For Dexter 4400lb Axle Made In October of 2008
  • I reached out to my contact at Dexter and based on the serial number you provided your axle was made in October of 2008 and will use braking assemblies # 23-455 for the passenger side, and # 23-454 for the driver side. I included videos of the products mentioned for you to take a look at.
    view full answer...

  • Will The Yakima Hangout 2 Bike Rack Fit A 2019 Chevy Trax?
  • Yes, the Yakima HangOut 2 Bike Rack - Trunk Mount # Y02637 that you were looking at is confirmed to fit your 2019 Chevy Trax. This is a very easy-to-use carrier which allows you to simply load two bikes on the back of your SUV even if you don't have a trailer hitch receiver. I recommend adding Yakima Same Key System (SKS) Cable, 9' Long # Y07233 and Lock Cores # Y07202 to keep your bikes locked to the carrier, along with security strap # Y02623 to lock the carrier to your trunk to deter...
    view full answer...

  • Will the RoadActive Suspension System Fit a 2021 Ram 3500 with Factory Air Suspension
  • I reached out to my contact over at RoadActive Suspensions and he reported that they've seen no issues with the Roadmaster RAS # RAS3613-HD interfering with the factory air suspension system. I really love the added support these systems give without having to adjust constantly after installation like an air bag system. The thing you will need to pay attention to on your suspension is whether or not your 2021 Ram 3500 has the top overload spring; as long as you don't have the top overload...
    view full answer...

  • Will the Draw-Tite Front Mount Hitch 65080 Fit a Tundra TRD With a Skid Plate?
  • From what I could find, the skid plate on your 2020 Tundra will need to be removed to create a four inch hole for oil filter access, and then either reattached or it may be left off. I included a picture from the instructions that shows where to cut the hole if you decide to reinstall it as well.
    view full answer...

  • Will the Tekonsha P2 Brake Controller Work with an Airstream That has Hydraulic Brakes?
  • The Tekonsha Prodigy P2 Trailer Brake Controller # 90885 will work on trailers with brakes on up to 4 axles and can be used with electric or electric-over-hydraulic trailer brakes. If your 2002 Ford Excursion came with a factory 7 Way already installed, the Tekonsha # 3035-P will also plug directly into a port under your dash, making the install very easy. If it came prewired with a factory 4 Flat, the port will still be under the dash and # 3035-P can still be used, but you will need...
    view full answer...

  • Replacement Shroud For Coleman 8333-876 AC Unit
  • The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White # MA8335A5261 that you were looking at is the part you need. This is a replacement shroud for your Coleman 8333-876.
    view full answer...

  • Will the Replacement Pull Pin # Y8880153 Work with My Yakima RidgeBack 2
  • While the Replacement Pull Pin for Yakima HoldUp Plus 2 # Y8880153 is not confirmed to work with your Yakima RidgeBack 2 # Y02457, I confirmed with Yakima that the correct part you need is the Replacement Hitch Pin for Yakima Hanging-Style Bike Carriers # 889-0231. Yakima also confirmed that this part comes with all hardware needed for the pin to function on your Ridgeback 2.
    view full answer...

  • What Weight Rating is Needed for Sway Control Bar on 9,000 Pound 27 Foot Long Trailer
  • When it comes to a sway control bar like the # 83660 Reese Friction Sway Control Kit, there is no weight rating. Since you have a trailer length of 27' the # 83660 is what you are looking for. This unit dampens trailer sway caused by crosswinds and traffic for improved stability and increased towing safety. You are also correct that two are recommended since your GTW is over 6,000 lbs. You will want to install one on the driver side and one on the passenger side. I have attached a video...
    view full answer...

  • 1,000 lb Blue Ox SwayPro Replacement Spring Bars to Upgrade From 750 lb Bars
  • That's an excellent question, and the way weight distribution hitches work in regards to rating is that you need to take into account your total tongue weight, which is the tongue weight of your fully loaded trailer, plus the weight of any cargo that is behind the rear axle of your tow vehicle. So the 100 lbs of gear in your truck bed will absolutely be a factor, and you will want to upgrade from the 750 lb Blue Ox SwayPro spring bars to the 1,000 lb rated bars, which are the following...
    view full answer...

  • Compatible Cover For The etrailer XHD Non-Binding Tow Bar For Roadmaster Direct-Connect Base Plates
  • The correct fitting cover for your etrailer XHD Non-Binding Tow Bar # e84ZR is the Demco Tow Bar Storage Cover Item # DM9523042. This cover is constructed out of marine-grade vinyl to protect your tow bar from the elements when not in use.
    view full answer...

  • What is the Correct Sized Cover For My 7' x 14' V Nose Cargo Trailer With Fenders
  • Yes, The Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 14' Long # 290-46003 is the cover you will want to get for you 14 foot trailer. The cover is 94" (7.8') tall and 168" (14') long and 104" (8.6') feet wide at the base which will be wide enough to cover over the fenders.
    view full answer...

  • Parts Needed to Use a Curt Echo Brake Controller With a 2021 Ford Edge SEL
  • You can still go with the Curt Echo # C51180, even with your phone handling all those functions. Though you will need your phone for the initial set up, you can then use the Manual Override Button # C83HR. Manual override is the only function the phone will handle after getting everything set up and running properly. I can say that your 2021 Ford Edge will not have a brake controller fuse, so you may need a few parts to get the controller the needed power, depending on what you have on...
    view full answer...

  • Can I Use a Hitch Mounted Cargo Carrier to Carry Bikes
  • I think the main difference is that with a bike rack like the Saris Freedom # SA4414B you're getting something that's designed specifically for carrying bikes and you know the bikes will be properly spaced so they're not banging against each other during travel. This also means that loading up the bikes is generally pretty straight forward and you don't have to worry about securing things for travel. If you were to use a Stromberg Carlson 23x60 Cargo Carrier # CC-100 with the adapter...
    view full answer...

  • 94 Shorelander PWC Trailer Replacement Hubs
  • I recommend the CE Smith Trailer Hub Assembly item # CE13311. These hubs are rated for 2,700-lb Axles have a 5 on 4-1/2 bolt pattern and come pre-greased. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease. They are also made for 8 inch wheels.
    view full answer...

  • 2015 Jeep Grand Cherokee Limited 6 Cylinder Receiver Hitch and Wiring Harness
  • Yes, the Draw-Tite Max-Frame hitch receiver item # 75699 is a confirmed fit for your 2015 Jeep Grand Cherokee Limited 6 cylinder. The prices for each can be found on the product pages. The only models that that specific hitch does not fit are the SRT-8 and EcoDiesel SRT-8. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118727. It plugs into the Jeep's wiring adapters behind each tail light. I've linked an install video for you. I also recommend...
    view full answer...

  • Does Curt Trailer Hitch C34ER Fit 2021 Hyundai Santa Fe
  • I double-checked with the manufacturer, and can confirm for you that the hitch you asked about will indeed fit your 2021 Hyundai Santa Fe: - Curt Trailer Hitch Receiver # C34ER
    view full answer...

  • Will a Kuat Sherpa 2.0 Fit a Curt Class I Hitch?
  • As the Kuat Sherpa 2.0 Bike Rack for 2 Bikes # SH12B is designed to fit Class I and Class II hitches with 1 1/4 inch receiver openings, it will definitely fit with the Curt # C11412. I can also confirm the # C11412 will fit your 2019 VW Golf GTI SI without issue. Though we have not done an install on a 2019 as of yet, I did include one we did on a 2016 for you to check out.
    view full answer...

  • How To Determine The Correct High/Low Adapter For Flat Towing A Jeep By The D-Ring Mounts
  • There's about a 3" threshold from level that your tow bar can be and still safely tow your vehicle. The brand of the high/low adapter doesn't matter so you could use a different brand if you wanted to. Since you have a 7" difference the Roadmaster High-Low Adapter for Tow Bars # RM-076 you were looking at would place you into the safe zone. If you tow multiple trailers that require a high/low adapter you could use the Gen-Y Ball Mount w/Stacked Receivers # 325-GH-314 which has 5 different...
    view full answer...

  • Furrion Rooftop AC Unit Compatibility With Dometic Brisk RV Air Conditioning System
  • The Furrion Chill Replacement RV Air Conditioner # FR42PV was designed to plug straight into your Dometic system using an adapter cable for a super simple plug-and-play install. This will allow you to retain use of your Dometic system in the interior of your RV instead of having to replace the distribution box and thermostat.
    view full answer...

  • Using A Ducted RV AC System On A Non-Ducted RV
  • The Atwood Air Command Rooftop RV Air Conditioner # AT15027-22 package comes ready to setup with a ducted system but can still be used with a non-ducted system. Since you're having a freezing issue you'll want to ensure the louvers aren't positioned in a way that cold air is being forced back up into the unit and that the drain holes on the bottom of the rooftop unit aren't clogged up in any way as this is the usual cause of of freeze up.
    view full answer...