Thank you for providing the measurements and your current seal number Gerald. We do have the Timken Grease Seal # TMK29ZR which has the 2.565" outer diameter and 1.750" inner diameter. view full answer...
I am sure we do but Big Tex does not have any kind of database to show what replacement parts fit their trailers.
I would be happy to see if we have studs that would work for your hubs, but first I will need to know a few measurements of your current studs.
The most important measurements are the spline diameter (E), spline length (C) and stud length (B) as shown in the included diagram.
For example the Trailer Hub Wheel Stud item # 7-122 is a 1/2" wheel stud that has the following dimensions:
Thread... view full answer...
Hey Todd,
The 500lb increase in capacity to the 4-Leaf Double-Eye Spring # e22YR will definitely work and would probably give you a bit sturdier of a ride because the springs won't compress as easily. Going too stiff can cause problems though so I'd definitely stay around the 3,500 to 4,000lb capacity when swapping them out. view full answer...
Hey Mike, the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes # LGA25VR that you referenced is 41 inches overall from the center of it's hitch pin hole out to the furthest point out on the bike rack. view full answer...
Hi Karen,
What are the dimensions of the space available for the fridge? If it's pretty tight the only open we currently have would be the the same fridge # 324-000119 (23-1/2"W x 25-3/4"D x 59-3/4"T), but if you have a bit more room we can look at other units like the # EV77FR (26"W x 28"D x 62"T). view full answer...
Hello Jason. I can definitely point you in the right direction. I was not able to find any references for the Model 6250c907 that would tell me exactly what cover you need, but I can provide dimensions for the covers you mentioned.
The Replacement RV Air Conditioner Cover for MaxxAir Units - Coleman-Mach / RVP Brand # MA8335A5261 measures 37" long, 25" wide, and 13-1/2" tall.
We also have the Replacement RV Air Conditioner Cover for MaxxAir TuffMaxx Units - Coleman-Mach - White # MA00-325001... view full answer...
Hi Daniel,
In order to find the correct replacement for your current entry doo lock you'll first need to remove the inside portion of the handle to see and measure the cutout hole in the door. Once we know the dimensions of the cutout hole we can then look for a suitable replacement. The Global Link RV Entry Door Locking Latch Kit # 295-000019 you were looking at is designed to fit cutout holes 2-1/2" to 3" wide x 3-1/2" to 4" tall. view full answer...
We've had this question come up before and I have linked a couple pictures below to see if they match up to what you have. If so you can use the Lippert Standard Baggage Door Latch Kit - Black item # LC317649 to replace your LCI slam latch.
I have linked a dimensional drawing of the Lippert item # LC317649 below. If this one does not match up with what you have go ahead and email me back directly with a couple of pictures and measurements and I'll be happy to look and see if we have the... view full answer...
Hi Timothy,
Yes, there will be some wind noise when driving your Toyota Tundra at highway speeds using the Pace Edwards JackRabbit Retractable Tonneau Cover with Contractor Rig Rack # JET5173-CR4005.
The rack is for some heavy-duty applications, with a 1,200 lb capacity with integrated ratchet straps on winches. So there's a lot going on with the rack to help carry as much as possible as safely as possible, and as a result there is going to be a bit of noise. view full answer...
Hey John,
The Demco Trailer Coupler # DM88XR is a channel mount style coupler and would need to connect to a channel like the # DM55342. We offer different channel mounts and versions with the channel built into an actuator so finding the correct part to go with it is going to depend on the style of the trailer tongue. If you want to send me some pictures and measurements of the trailer tongue if it's a straight tongue then I can pick out some options for you. view full answer...
I received your pictures but cant make out the exact measurements. Here are some different options with the different inner diameters.
10-1/4" # AM981306
10-1/2" # PX1307SS
11-11/16" # PX1309SS view full answer...
The centerline on the # BR27FR is going to be from the center of the hitch pin hole. If you draw a line straight out and measure the distance to the bottom of the hook that is 1". I have attached a diagram below for your reference. view full answer...
To find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth.
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match... view full answer...
Hey Echo, so if the part # SP502L matches all of the dimensions you can take I would say it's pretty safe to assume it would fit and work great. Worst case scenario the attachment on top of the ladder might need to be relocated or modified. view full answer...
Hey Chandler. Yes, your Curt Q25 hitch head will indeed work with the Curt 5th Wheel Round Tube Slider for Ford Super Duty Towing Prep Package # C16020. Just keep in mind that the slider base is rated for 24,000 lbs instead of 25,000 lbs for the head. So, 24,000 lbs will be the max towing capacity for this setup. view full answer...
Hey Jeff,
I doublechecked the length with Yakima and they list the Rack and Roll Trailer # Y08107 dimensions as 132.00 in L x 78.00 in W x 22.00 in H so the total length is 11'. I'll have the 17' length corrected on the product page to reflect that. view full answer...
Sorry it took me so long to get you the measurement Shawn, as I had to wait to get the measurement for the Bulldog Cast Head Coupler # BD4420000317 from Bulldog. We did not have any in my local warehouse to measure but according to Bulldog it is 7-5/8" from the back of the coupler to the center of the hitch ball. view full answer...
The Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002 can be used to help get your pontoon kayak loaded onto the roof of your Jeep Wrangler Unlimited Rubicon, but you'll have to remove the load stops or slide them to the middle since the pontoons will be sitting towards the outside of the 49" long crossbar.
This was designed around a standard kayak so you'll want to keep that in mind when you go to use it. view full answer...