I may have an option that will work for you, however the Draw-Tite Ultra Frame Class V Hitch, # 41947, is a custom fit hitch designed for full size pickup trucks. Frames on trailers are typically wider than frames on vehicles and the frame width can differ between trailer manufacturers. Because of this, trailer hitch manufacturers offer adjustable width trailer hitches. Unfortunately there are no custom fit trailer hitches for certain makes and models of trailers.
Before selecting a trailer... view full answer...
The Draw-Tite Hitch, # 24847, and the Hidden Hitch Trailer Hitch, # 60263 (no longer available), are basically the same hitch so they both have the same ground clearance and side profile. Draw-Tite and Hidden Hitch are sister companies that use the same design process for their trailer hitches. The top of the receiver tube for both trailer hitches will sit 4-3/4 inches below the frame rails on your 2012 Toyota Prius V.
If you are planning on using the hitch for a bike rack or cargo carrier,... view full answer...
The trailer hitch with the best receiver depth, or bumper clearance, for your 2019 Subaru Outback is the Draw-Tite Trailer Hitch # 76227 which is about 2 inches from the hitch pin hole to the edge of the bumper.
This is an inch more clearance than the Curt Trailer Hitch # C13410 and EcoHitch Hidden Trailer Hitch # 306-X7601 that also fit your '19 Outback. Both of these hitches are approximately 3 inches from the hitch pin hole to the edge of your bumper, as you can see in the accompanying... view full answer...
While the EcoHitch part # 306-X7369 is a 2 inch hitch, it does have lower weight capacities more associated with 1-1/4 inch hitches of 2,000 lbs trailer and 300 lbs tongue weight, since this hitch is designed to fit a lower capacity tow vehicle, the Prius Prime, it has the lower towing capacity. The larger hitch size does give you more options for hitch accessories since 2 inch hitch accessories are the most popular. view full answer...
Trailer Hitch Pins like the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome # e98880 and # e98881 you were looking at do not have a specific weight rating due to them being so much stronger than the rest of the components used for towing.
A hitch pins like the # e98880 and # e98881 will still be holding long after the tow bar, ball mount, or trailer hitch receiver has failed.
As an example a rough sheer strength of a similar 5/8" diameter bolt is nearly... view full answer...
The Draw-Tite Trailer Hitch Receiver # DT78MR measures approximately 3-1/4 inches in between the mounting plates and approximately 1-1/2 inches from the center of the mounting holes to the top of the receiver.
I do want to mention that I do not recommend using this on a travel trailer, as its capacity and installation are only meant for certain years of Jeeps, and we do have trailer hitches that are specific to trailers. These hitches are going to be the safest way to use a hitch on a... view full answer...
Yes, the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches part # GY89SR as with any hitch extender reduces both tongue weight and gross trailer weight by half. The weight capacity with this hitch extender is 500 lbs for tongue weight and 10,000 lbs for gross trailer weight unless the hitch is rated lower. view full answer...
I can tell you all of the weights of the trailer hitch receivers that fit your 2020 Subaru Outback:
- Curt Trailer Hitch Receiver # C67JR weighs 28 lbs.
- EcoHitch Hidden Trailer Hitch Receiver # EH34FR weighs 44 lbs.
- Stealth Hitches Trailer Hitch Receiver with Towing Package weighs a total of 58 lbs
Between these three options I would definitely go with the Curt hitch. It is easily the best value for your money as it gives you a quality hitch with a concealed crosstube so it is not... view full answer...
It is possible to use your 2 inch accessories in a class II, 1-1/4 inch trailer hitch. You would have to use a hitch expander, 1-1/4 to 2 inch. However, the use of an expander will reduce the tongue weight capacity of the trailer hitch by 50 percent.
It appears that the vast majority of trailer hitches for a 2011 Toyota Camry have a tongue weight capacity of 300 pounds. When using an expander, like # 80303, that capacity will be cut down to 150 pounds. This means that the weight of any... view full answer...
You are correct about the hitch pin hole size of the Class I Curt Trailer Hitch Receiver # C11276 being 1/2 of an inch. This is true of all trailer hitches that have a 1-1/4 inch receiver like this hitch does.
I have added a link to the directions, as well as some video installs for you to check out of the Curt Trailer Hitch Receiver # C11276. view full answer...
Yes. The only difference between the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball - 1,000 lbs TW # TVXL25 and the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball - 1,000 lbs TW # TVXL2 is the hitch ball size. Either model can accept the other hitch ball size, but they are sold separately.
You can get the other hitch ball size to go with whichever model you choose. You can use the 2" Hitch Ball w/ Base for Trailer Valet XL Trailer Dolly - 1,000... view full answer...
For your 2018 Kia Soul there are 3 trailer hitch receivers available.
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11419 which weighs 32lbs
The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7326 which weighs 37lbs
The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24915 which weighs 21lbs
Between these hitches I recommend the EcoHitch # 306-X7326 simply due to it having a 2" receiver which is preferred as it allows... view full answer...
The Curt Class I Trailer Hitch, # C11474, has a gross towing weight capacity of 2,000 lbs and a tongue weight capacity of 200 lbs, which are common ratings for Class I trailer hitches. To verify that you can tow your 550 lb sailboat on your E-Z Loader trailer, you will need to check your vehicles owners manual to verify the towing capacity of your vehicle.
If the towing capacities of your 2012 Volkswagen Jetta SportWagen are lower than the towing capacities of this hitch, then you will... view full answer...
The EcoHitch Stealth Trailer Hitch item # EH36SR weighs 44 lbs. This hitch is confirmed to fit a 2022 Tesla Model S.
I recommend using the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch item # 306-XA2002. This will cover the hole the receiver extends through when you don't have the receiver installed. view full answer...
Before installing a trailer hitch on your 2016 Hyundai Elantra you first have to tow according to the towing limits posted in your owner's manual. No matter the weight rating for the trailer hitch, the towing capacity of your vehicle takes precedent.
According to your owners manual, trailer towing is not recommend with the 2016 Hyundai Elantra. The reason for this might be that weight of a trailer on a hitch (tongue weight) may be too heavy for the frame and rear axle on the Elantra.... view full answer...
The highest-rated trailer hitch extender is from Gen-Y and is rated for 10,000 lbs towing/500 lbs tongue weight:
- Gen-Y Hitch Hitch Extender for 2" Trailer Hitches # GY89SR
Please note that all hitch extenders, including the # GY89SR, will reduce your hitch capacity by 50 percent, and you have to abide by whatever is lower - the 10k of the extender or 50 percent of your hitch capacity.
You will also need a hitch lock to secure this extender to your hitch, the Trailer Hitch Receiver... view full answer...
I have a couple of options for hitches for your 2023 Ram 5500 depending on whether or not you want a 2" receiver or a 2-1/2" receiver. I have listed both options below:
2" Hitch - Curt Trailer Hitch Receiver item # C15400
2-1/2" Hitch - Curt Trailer Hitch Receiver item # C15800
If you are wanting a hitch that has both a 2" and a 2-1/2" receiver then you will need the TorkLift SuperHitch Original Trailer Hitch Receiver item # TL49YR. view full answer...
The adjustable RV hitches that we carry are rated by tongue weight and gross trailer weight. The Curt Adjustable RV Hitch, # 13703, that is adjustable from 22 inches to 72 inches has a tongue weight rating a 350 lbs and a max gross trailer rating at 3,500 lbs. The measurement is the mounting distance allowed for the hitch. This hitch can be mounted on a motor home or trailer frame with a width between 22 and 77 inches.
The weight capacities for this hitch might sound light for a motor... view full answer...
Curt trailer hitch # C11020 will support a trailer weighing no more than 2,000 pounds and no more than 200 pounds tongue weight as long as the vehicle is rated to tow. You will need to consult the owners manual to determine if the vehicle can tow at all. If it can and its capacities are lower then you will go by the lower capacity.
A trailer is the safer way to go. A hitch mounted carrier and scooter on it will be far too heavy for this Class I trailer hitch. A trailer is easier on the... view full answer...
The Curt Trailer Hitch Receiver Lock # C23519 that you referenced is similar to a standard hitch pin that you would use for a weight distribution system. To ensure that this is compatible for your application I have attached a photo showing that the pin diameter is 5/8" and the inside (usable) length is 3-5/8".
Hitch pins don't really have a towing capacity since they aren't load bearing. As long as they are the correct fit for your trailer hitch receiver, they will be able to handle... view full answer...