The Curt hitch part # C78KR is a confirmed fit for your 2017 Lincoln MKX. It's a Class III trailer hitch that would work well for you. For installing the hitch you would want to find a local mechanic with a good reputation to perform the install. These installs are pretty basic for most mechanics so you would not need a specialized installer.
For trailer wiring you then would want the part # C56298 which is a confirmed fit.
If you wanted to do some towing you might be interested in etrailer... view full answer...
Sounds like you are looking for a ball mount. We carry quite a few of them actually. But when you buy one you want to go with one that allows the trailer to be towed as level as possible.
I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will... view full answer...
You sure can.
The Blue Ox EZ Light Wiring Harness you mentioned will plug in-between the tail lights and the Tekonsha T-One Vehicle wiring harness you have installed on your 2015 Lincoln MKX, and since they will not be used at the same time you will not have any issues with overloading the wiring.
I included a video of the # 118519 being installed for you to take a look at. view full answer...
Yakima has really great roof rack options for your 2016 Lincoln MX with flush rails like the Yakima Jetstream rack part numbers # Y00425, # Y00145, and # Y89FR. This is a very strong and well designed rack that would work well to carry two kayaks and upper wind force would not be an issue at all.
Then for a kayak carrier that can carry your two kayaks that fits the rack as well the Thule Compass part # TH890000 would be a really great option. view full answer...
I checked with Yakima and the strap you need is # 8860050 for the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075 that you have. This is the strap and hook that from from the front/rear of the vehicle to the boards you are carrying with the carrier. view full answer...
While technically a fit, I do not recommend the Thule Passage # TH911XT for your 2008 Lincoln MKX because of that spoiler. It is not meant to support weight. What I do recommend is the Hollywood Racks Over-The-Top rack # HRF2-3.
The Over-The-Top rack was designed specifically for vehicles like yours that have a spoiler. The rack has an upper arm piece that moves the top straps up and over the spoiler so no weight is put on it. I have linked a video showing how it works.
There is nothing... view full answer...
For your 2016/2017 Lincoln MKX the Thule Aeroblade Edge Roof Rack that consists of part numbers # TH7602-TH7603 and # THKIT4047 is a confirmed fit for the flush rails you have. The fit kit attaches to the factory fixed mounting points.
There are no fit exclusions for the panoramic roof versions of your vehicle so this would fit well. view full answer...
We do carry base plates for your 2008 Lincoln MKX with the Roadmaster Falcon tow bar. I recommend the Roadmaster Base Plates, part # 4408-1. These are designed to fit any RoadMaster tow bars and the front arms, on the base plate kit are simple to remove, using hitch pins. Once the front arms have been removed, the remaining brackets are virtually invisible.
There are some other items you will need to complete your towing package. Next, you will need safety cables as required by law. I... view full answer...
We actually sell the DeeZee NXc running boards with the proper mounting kit for your 2016 Lincoln MKX. You will want # DZ16202-16224 which is both the bars and the mounting brackets and hardware.
If you already have the running boards then the bracket kit by itself is # DZ16224. view full answer...
Since you have a 2014 Lincoln MKX and a Blue Ox tow bar the correct base plate kit you'd need is the part # BX2625 which fits with and without adaptive cruise control. Since your motorhome has air brakes the supplemental braking system you'd need is the SBS Air Force One part # SM99243.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight... view full answer...
For your 2016 Lincoln MKX we don't have a custom tow bar wiring but we do have great options like the diode kit part # RM-15247 which will allow you to control the MKX taillights with your tow vehicle's taillights. view full answer...
In order to flat-tow your 2012 Lincoln MKX behind a 2007 Tiffin Phaeton, you will need a base plate kit, tow bar, supplemental braking system, safety cables, flat-tow wiring, and a possible high-low adapter. I have attached my recommendations on each of the following for you below. These recommendations will be the ones that are least invasive to the toad vehicle meaning you can easily remove them when you send your daughter off to college.
Base Plate Kit: Blue Ox Base Plate Kit part... view full answer...
The Inno Square Bar Roof Rack for your 2016 Lincoln MKX with the bare roof, which consists of # INB137 for the two 54 inch Square Crossbars, # INSUT for the Inno Feet, and # INK676 for the Fit Kit, is a great choice.
This will provide you with an economical yet durable and versatile setup that will work perfectly to secure your existing Yakima Rocket Box or other accessories such as a bike rack or kayak carrier you may want to mount in the future. The mounting feet and clamps allow for... view full answer...
Yes, there is an adapter that you can use to fit your bike on the Swagman bike carrier # S64400. I recommend bike adapter bar # 64005. I have linked a video showing how it works. Basically, one end clamps around the handle bar gooseneck and the other end around the seat post. This creates an artificial top frame tube to fit the cradles on the carrier. view full answer...
We do have trailer hitches that are designed to fit your 2016 MKX.
I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75234. This is a Class lll hitch and it has a 2 inch receiver opening. view full answer...
For an aeroblade style roof rack confirmed as a fit for your 2017 Lincoln MKX with a naked roof the Inno roof rack of part numbers # INXB115-2, # INXS200, and # INK676 would be what you need. This is a flush bar style roof rack which means the crossbars do not extend past the feet at all so the bars match the width of your roof. view full answer...
We do offer both hard-wire and custom plug-in 4-pole wiring harnesses for the 2008 Lincoln MKX. The unit I recommend for your MKX is the custom plug-in harness from Tow Ready, part # 118551. This trailer wiring harness installs by plugging in to your MKX's tail light wiring; just one spliced connection is required, for the 12V power input wire to the converter.
This connection is made from the short wire on the converter box to your battery's positive terminal, through the included fuse... view full answer...
The rear spoiler is going to be a problem with any of the trunk mount bike rack options. I do not recommend a trunk mount for the 2009 Lincoln MXK with the rear spoiler because the spoiler cannot withstand the stress. The best and safest way to carry bikes is by using a trailer hitch and hitch mount bike rack.
I recommend the Class III trailer hitch # C13067. The 2 inch receiver on this hitch will afford you many bike rack options. I have linked a video showing a typical installation and... view full answer...
For your 2016 Lincoln MKX with EcoBoost motor and adaptive cruise control you can use Roadmaster base plates # RM-524447-4. In order to use these base plates with your Blue Ox tow bar you will need adapter # BX88178.
If you do not already have safety cables I recommend # RM-643. the coiled design helps keep the cables off of the ground.
For lighting you can use diode kit # RM-15267 or if you will not be towing the vehicle often I recommend a magnetic kit # RM-2120.
You may also need... view full answer...
It sounds like you need a flat-towing wiring harness to allow your motorhome to control the lights on the towed MKX. There are several options for flat-towing lighting and these vary in cost, complexity of installation and in how permanent that installation is.
With a brand new vehicle like your MKX you can consider a set of magnetic lights like # TLL21RK, which uses a 4-pole flat type connector. This kind of lighting kit means you do not have to cut into the brand new car's wiring or... view full answer...
Go To Results