I checked with Rhino-Rack for you in order to confirm the correct parts you will need for your 2021 Jeep Wrangler with the Sky One-Touch roof, and what you will need are gutter mounts that are 11 inches high. With that height you will be able to utilize your Jeep's Sky One-Touch without interference from the rack.
The parts that you will need are the following:
- Rhino-Rack Vortex Aero Crossbars # RRVA150B-2
- RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2
- Rhino-Rack... view full answer...
The Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524 is listed as not a compatible fit because it's a very tight fit trying to get the clevis onto the brake pedal and 2021 Jeep Wrangler owners have had to reach out to Brake Buddy to get a special clevis sent out to them.
You can purchase this and get contact Brake Buddy to get the special clevis or you can go with the Blue Ox Patriot Portable Braking System - Proportional Item # BLU37TR which is... view full answer...
Thanks for the photo! Glad you're enjoying the site and we can absolutely get your 2016 Jeep Wrangler with an XRC front bumper ready to flat tow. First you'll need the base plate adapters to connect to your D-rings, and the correct one is going to depend on the size of the pin hole on your bumper, which is likely 7/8" but could be 1" so you'll want to verify that size and then you can use either of the following:
- 7/8" Pin: Blue Ox Aftermarket Off-Road Bumper Adapter # BX88357
- 1" Pin:... view full answer...
I can help you figure out how to determine if the Swagman Trailhead # S63380 will be able to clear the spare tire on your 2006 Jeep Wrangler, though it will require you take some measurements. Just take something with a straight edge like a yardstick and hold it against the back of your Jeep's spare tire and then use a tape measure to find the distance from the center of your hitch pin hole to the straight edge (like in the accompanying photo), and that's the amount of clearance you will... view full answer...
The Malone Hanger Spare Tire Carrier # MPG2147 will work on the spare tire of your daughter's 2021 Jeep Wrangler since the width of your factory spare tire is 9-1/2 inches wide.
As far as bike frame adapters for the Malone Hanger, you will need adapter bars for your grandchildren's bikes. For those parts, I recommend the Swagman Deluxe Frame Adapter Bar # 64005 for each of the children's bikes. The adapter bar will give the bikes a straight, horizontal frame that is required to mount on... view full answer...
I have a great alternative for you. Unfortunately, I confirmed with Aries that the Aries Rear Fender Flares for Jeep - Raw Finish Aluminum # AA2500202 do not have the correct mounting brackets that are compatible with your 2021 Jeep Wrangler JL Rubicon. The only rear fenders we carry that will fit your wheel wells are black.
For a black option, I recommend the Steel Westin Rear Tube Fenders # 62-1035. The steel construction of the Westin fenders will give your Wrangler a sleek look. The... view full answer...
Yes, the Thule Outbound Rooftop Cargo Bag # TH868 will work with both the Thule Canyon XT Roof Cargo Basket # TH859XT as well as the Thule Canyon XT Roof Cargo Basket # TH859XT-8591XT. view full answer...
I'll start off by saying that installing any flat towing base plate on your 2004 Jeep Wrangler TJ will reduce the approach angle slightly since the etrailer Invisible Base Plate Kit - Removable Arms # e98946 installs to the front frame stanchion. With that said, I don't believe it will reduce it too much because of the position in relation to the front wheels.
When it comes to keeping your tow bar level, you will need to measure once everything is installed to confirm, but you shouldn't... view full answer...
The Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System # LC324269 needs to be torqued to 132 ft-lb.
Lippert also recommends using Loctite Threadlocker 262 # LT37420 to prevent the bolt from loosening. view full answer...
If you already have a Roadmaster tow bar for your 2007 Jeep Wrangler then you'll want to get Roadmaster base plates as well to avoid having to purchase adapters. For a standard factory bumper you'll want the Roadmaster Direct-Connect Base Plate Kit # 1429-3. These direct connect style base plates will offer you a quick and easy attachment point for your tow bar.
To flat tow your 2007 Jeep Wrangler you'll also need a tow bar wiring kit, braking system, and safety cables. If you haven't... view full answer...
They are not; the Aries Nerf Bars that fit your 2005 Jeep Wrangler are 46.26 inches long, which I verified directly with the manufacturer. They are available in either black or polished stainless steel:
- Polished Stainless Steel: Aries Round Nerf Bars # AA35600-2
- Black Powder Coated Steel: Aries Round Nerf Bars # AA35600 view full answer...
If they’d like to connect a head unit like the Item # JWM20 to a wireless Bluetooth speaker, you would need to run it by auxiliary for it to work while connected to the radio. view full answer...
The Roadmaster Universal Hy-Power Diode Wiring Kit you referenced, part # RM-154, will work on your 1994 Jeep Wrangler. This kit includes the 4-pole connectors, diodes and wiring components for installation that will allow your Wrangler tail light bulbs to operate in tandem with your RV. This is a great option for frequent flat-towing. I have linked an install video for your reference.
A simpler option, and one that does not require any alteration to your toad wiring, is to use a plug-in... view full answer...
To connect your Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item # RM-520 to your Blue Ox Base Plate Kit - Fixed Arms # BX1120 you'll need the Blue Ox Base Plate Adapter Brackets for Roadmaster Tow Bars Item # BX88151. view full answer...
The Swagman Chinook Bike Rack for 2 Bikes # S64683 will fit with a spare tire if the distance from center of hitch pin hole to the end of the spare tire is less than 6 inches.
If you need something with a bit more clearance for a spare tire, the Hollywood Racks Trail Rider Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount # HR200Z allows for 12-1/8 inches from the distance from center of hitch pin hole to the end of the spare tire. view full answer...
For your 2005 Jeep Wrangler you would need to use replacement backup light and alarm # HM20100VA because your Jeep takes an 1156 bulb. The one that you referenced, # HM20101VA, is designed to fit in place of a 3156 bulb and would not fit your Jeep. view full answer...
I wouldn't be able to confirm fit of a base plate kit with the Warn Elite Full Width Bumper but since it has d-rings you can use the Blue Ox Aftermarket Off-Road Bumper Adapter part # BX88357 for 7/8" pins or part # BX88358 for 1" pins. view full answer...
Yes, the Bestop Window kit # B5812115 is confirmed as a fit for your 2002 Jeep Wrangler. This kit is confirmed as a fit for 1997-2002 Jeep Wranglers, and includes side and rear windows. view full answer...
If your generator will fit a 60 by 24 inch cargo carrier then Pro Series carrier # 63153 would be a great option. It measures 12-3/4 inches from the center of the hitch pin hole to he closest edge of the carrier. I have included a link to a video review for you.
The carrier does not have built in anti-rattle capabilities, which is normal for cargo carriers, so I recommend adding locking hitch pin and anti-rattle device # 63232.
If your generator will not fit the 60 by 24 inch dimensions... view full answer...
From what I could find it looks like the correct Currie base plate kit for your 2008 Jeep Wrangler is part 9033JK. If this is what you will be getting then it is compatible with the Blue Ox Avail # BX7420, Alpha # BX7380, or Acclaim # BX4330 without using an adapter.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Since all of the Blue Ox tow bars come with safety... view full answer...