The Hollywood Racks SR1 2-Bike Carrier - Spare Tire Mount # HRSR1 will fit your 2018 Jeep Wrangler Sahara spare tire. The backup camera will not be an issue with the rack fit as the straps are adjustable, however the view with bikes mounted will obviously be impacted. I reached out to my contact at Hollywood Racks to confirm it is compatible with both the backup camera and the tail light mounted behind and above the spare. You can see the tail light fit in the attached video at the 2:09... view full answer...
Yes, the Blue Ox Base Plate Kit # BX1139 you're looking at will work just fine with your 2018 Jeep Wrangler Rubicon with a factory steel bumper and winch.
To complete your flat towing setup, you're also going to need a braking system # SM99251, a stop light switch kit # RM-751490, a set of tow bars # RM-677, and a wiring harness # RM-154. view full answer...
Yes, you can use the Universal Stop Light Kit # RM-751000 and splice your brake controller into the blue brake signal output wire to complete your brake controller installation.
For a no splice option you can use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers # 3073-P to plug into the harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
From this harness you can use the Redarc Tow-Pro Wiring... view full answer...
Yes, there are snap-on towing mirrors that fit your 2018 Jeep Wrangler JL, which I verified directly with the manufacturer for you. The correct fit for your Jeep are the following:
- K-Source Snap & Zap Custom Towing Mirrors - Snap On # KS39NQ view full answer...
Yes, we have confirmed with Curt that the T-Connector # C56407 is compatible with the LED connections on your 2018 Jeep JL Wrangler Unlimited Sahara. Attached is a picture of the connector for the Curt that you can compare to the connector on your JL if you would like.
I have also attached a link to the written instructions and a helpful article that explains how to route a 12V power wire to the battery. view full answer...
The Curt T-Connector Vehicle Wiring Harness # C56407 and Tow Ready 118821 will absolutely work together on your 2018 Jeep Wrangler JL Unlimited to give you a 4-way at the rear of your Jeep to tow your trailer and at the front to flat tow. The reason for this is the Curt connector will plug into the tail light housing while the Tow Ready will splice in; I recommend starting with the Curt and then installing the Tow Ready.
The other option if you wanted to make things really simple is to... view full answer...
Yes, the Yakima HoldUp 2 Bike Rack part # Y02443 and the Yakima HoldUp EVO 2 Bike Rack part # Y02479 will work with the Yakima BackSwing Swing Away Hitch Extender part # Y02483. I confirmed this with my contact at Yakima for you. They have tested these together which is why they are able to confirm fit.
The Kuat Pivot Swing Away Hitch Extender part PV20B is no longer available but you could still use the Kuat NV 2.0 2-Bike Platform Rack part # NV22B with the Yakima BackSwing Swing Away... view full answer...
The problem with the 2018 Jeep JL Wranglers is that the circuit you need to install the brake light relay # RM-88400 is inaccessible but it isn't required on this vehicle. When your JL Wrangler is set up in flat tow mode (see owner's manual) the brake light circuit is not active. That is why we do not list it for that particular vehicle. When in flat tow mode it will work fine.
Or you can avoid all together by going with magnetic light kit # RM-2120.
If your braking system has a monitor... view full answer...
The Yakima SwingDaddy 4 Bike Rack has a distance from center of hitch pin hole to top of upright bar of 9 inches. If you don't already have this hitch, then you may want to consider the Yakima FullSwing 4 Bike Rack # Y02465 which has that same 9 inches from the hitch pin. Depending on the hitch length and the tire width, you may or may not need a hitch extender like the Curt # C45791. Using a hitch extender will reduce the hitch's tongue weight capacity by 50% which shouldn't be an issue... view full answer...
As long as the distance from the center of the hitch pin hole to the outer edge of the spare tire on your 2018 Jeep JL Wrangler Unlimited is less than 15-1/2" then yes, the Ultra-Fab Dirt Bike Carrier part # UF48-979033 will work well for you. The only thing you will need to make note of is the vehicle's tongue weight capacity and the tongue weight capacity of your hitch. If either the vehicle's tongue weight capacity or the hitch capacity is lower than the weight capacity of this carrier... view full answer...
The only difference between the Roadmaster Crossbar-Style Base Plate Kit # RM-521453-4 and Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 is the style of the arms. The crossbar style was the original, but Roadmaster has strengthened their products and moved on to the direct-connect style which does not require the use of an additional crossbar. They actually just stopped offering the crossbars with their tow bars last fall as well, since they're no longer needed. With the direct-connect... view full answer...
The Thule Hitching Post Pro- 1-1/4" and 2" Hitches # TH934XTR has a measurement from the center of the hitch pin hole to upright bar of the carrier of 13-1/2 inches. If your measurement from the center of your trailer hitch's pin hole to the outside edge of your spare tire is less than that 13-1/2 inches, then the Hitching Post Pro is a great option.
If you don't already have a trailer hitch receiver, then the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13392 is my... view full answer...
The best front mounted trailer hitch we have for your 2018 Jeep JL Wrangler Unlimited with the standard front bumper is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65079. This hitch is a custom fit for your Jeep and installs using pre drilled holes in the frame. In order to install this hitch you will need to trim the plastic air dam and remove the metal one but there will be no way around this for a front mounted trailer hitch.
I have attached the installation instructions... view full answer...
The Thule Motion XT Rooftop Cargo Box part # TH629807 has a minimum crossbar spacing of 23-5/8" and a maximum crossbar spacing of 36-7/8". This is measured from the center of each crossbar. view full answer...
Yes, the Aries ActionTrac Motorized Running Boards, # AA3025165 will fit 2018 Jeep JL Wrangler Unlimited. These motorized running boards will lower to automatically create a pair of steps on each side of your vehicle, the 2nd Step deploys and retracts from main housing when doors open and close. All needed hardware for installation is included. view full answer...
Yes, the Curt Echo Mobile Trailer Brake Controller part # C51180 will work just fine on your 2018 Jeep Wrangler Unlimited Rubicon with the factory tow package. The 12 volt circuit on your Jeep should already be active so all you will need to do is plug the unit into the 7-way and then go though the pairing process. view full answer...
Yes, the Curt Echo Mobile Trailer Brake Controller # C51180 is compatible with your 2018 Jeep Wrangler Rubicon with the factory tow package 7-way. As long as the vehicle has an active 7-way connector that has the 12 volt circuit active this controller will fit and work well. All you'll need to do is plug the controller in, plug your trailer into it, and then sync your smart phone to it and you'll be set!
I attached a review video for more info on it as well. view full answer...
You will need a hitch extender like the Curt Hitch Extender part # C45791 in order to clear the rear spare tire on a Jeep with most bike racks like the Thule T2 Bike Rack. There are a few hanging style racks that will clear as is but that's pretty much it. view full answer...
We do have a solution for you to have a square bar roof rack on your 2018 Jeep JL Wrangler Unlimited but unfortunately you won't be able to use Inno bars as they are not compatible with the Thule feet.
I am not sure what the 150 Thule feet are that you referenced but I can say that the correct gutter feet for your 2018 JL is part # TH65BJ for the newer 60" SquareBar Crossbars # TH712500.
If you would like to add locks to your roof rack then you also need the 4 pack of lock cores # TH450400.
Attached... view full answer...
The Thule Hitching Post Pro Folding/Tilting 4 Bike Rack # TH934XTR has a tilting mast feature that can be seen in the linked photo and in the linked video at the 1:40 mark. The mast can tilt back to about a 45-degree angle. On the Grand Cherokee in the example video the hatch can open fully.
The fixed vertical base part of the tilting mechanism, shown in the photo, will extend up 6-inches from the horizontal shank. If you measure 6-inches up from the top of your hitch opening you will... view full answer...
Go To Results