The Stromberg Carlson Folding Handrail # AC-544 is not a fit for any specific year, make or model of trailer, but there is no reason it wouldn't work on your 2019 Jayco Whitehawk. The only thing you need to make sure is that you have a wall stud or blocking behind the door of your RV; if so, this handrail will work just fine. view full answer...
While I could not find exact information from Jayco verifying exactly what bolt pattern your 2005 Jayco Jay Flight Baja 23 travel trailer uses I can help you find the correct bolt pattern. First your axles should have a data tag which may have worn off over the years. If not the information on the tag will help to verify the correct bolt pattern from the factory. The tag is placed in the center of the axle on the back side.
The best way to verify would be to measure your bolt pattern.... view full answer...
RV air conditioner systems stick to an industry standard size so the Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White # FR92PR you referenced would fit your 2006 Jayco Jay Flight 31BHS travel trailer. This is the complete setup so you'd be replacing your entire AC system with this. This BTU rating of this system is higher as well so your new system would run and cool more efficiently than your previous one.
I've attached a video below where John will walk you through... view full answer...
The Curt Adjustable Width Trailer Hitch item # 13703 fits RV's with frames from 22" to 72" Wide. This is a universal hitch but you should have no issues attaching it to your 2023 Kodiak RV.
I have linked an installation video below. view full answer...
We offer four different axle lift kits for the Dexter Torflex axles. The difference between these kits is based on the weight capacity of the axle or tandem axles.
There will be a tag on the axle shaft that will have the information needed to determine which lift kit is needed. The tag will have axle model listed and should list weight capacity and a serial number as well.
For a Dexter 11 axle the recommended lift kit will be # K71-724-02 for tandem axles rated 4.1K to 6K lbs. This kit... view full answer...
The Ultra-Fab Electric A-Frame Jack # UF38-944014 will work just fine for your 2013 Jayco Flight 19RD. This jack has the capabilities to lift up to 4,000-lbs of tongue weight, which is plenty for your trailer.
While this jack will work for you, I recommend the Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500. This jack is going to be closer to your tongue weight, while still offering plenty of remaining capacity. view full answer...
There is a gear in the housing of the Replacement 18:1 Venture Motor and Driveshaft with Right Angle Gear Box # LC117292 right by where you would bore through so you run the risk of it interfering with the operation of the motor.
You'd also break through without a gasket to seal up the housing so the internal components could be compromised by the elements. You'd also be voiding any warranty you have with the manufacturer so I can't recommend this route.
You can replace just the motor... view full answer...
The only thing you'll need to verify is that the width of the frame on your 2020 Jayco Jay Flight is between 49-1/2" and 76-1/2" (reason being we have no way of knowing the exact width of any trailer frame). If it is, then yes, you can use the Stromberg Carlson hitch you asked about, which is the following part number:
- Stromberg Carlson Adjustable Accessory Hitch Receiver # SC45MR
It is very likely your frame is in between those measurements, but you'll just want to make sure it does. view full answer...
The best way to know for sure what the diameter of the axle is, is by checking the axle spec sticker on the center of the axle. If it doesn't have a diameter it will have a capacity, which can help you determine the diameter. If you've got smaller than a 3" axle you've most likely got a 2-3/8" diameter axle which corresponds to a 3500-lbs capacity, so you'll want to use the Dexter Over-Under Conversion Kit # K71-384-00. I do believe the 23MB has tandem axles so you'll need 2 of these kits.
The... view full answer...
Manufacturers do not list the parts they use so the only way to find the correct replacement is to remove the entry door lock you currently have on your 2021 Jayco Jay Flight Rocky Mountain Edition Travel Trailer and measure the cutout hole.
The Bauer Products European Style RV Entry Door Lock - Right Hand - 4-1/2" Tall x 6-1/2" Wide # BA38AR you referenced requires a cutout hole 2-3/4" tall x 3-3/4" wide. view full answer...
The Phoenix USA QuickTrim Hub Cover for Trailer Wheels # PXQT545BHS fits wheels with a bolt pattern of 5 on 4-1/2". If that is the bolt pattern of the wheel that you have on your 2007 Jayco Jay Flight then these would work. Unfortunately there isn't a database or anything that allows me to look up the bolt pattern on different trailers, especially since they could have been changed since the manufacturer.
That being said, you can measure to find what bolt pattern you have. I have included... view full answer...
The OptiMate Solar Duo Portable Solar Panel with Controller - 10 Watt Solar Panel # MA69JR does have an SAE solar connector included, as well as terminals and clamps to attach directly to the battery, so you've got a variety of ways it can be installed. The SAE plug can be used to plug into the existing solar wiring on your 2019 Jayco Jayflight 28BHS. view full answer...
We do carry trailer lights and a license plate holder that will work for your Jayco FB22 travel trailer, although we do not have a list of specific parts available for makes and models of trailers. All you'll need to do is measure your current lights and find a close match; I've added a link to our entire selection of trailer tail lights for you to look at as well as a link to our license plate holders such as # LP5SB. view full answer...
The short answer to your first question is you will need to take some measurements. I'm not entirely sure what upgrades you want to make to your 2011 Jayco Jay Flight 22FB, but I'm assuming you mean something like upgraded equalizers. In order to choose the correct equalizer you will need to measure what you have now.
For example, I have the Dexter E-Z Flex Suspension Kit # K71-652-00 on my Jayco Jay Feather which you can see in the installation video below. I had a fairly standard Dexter... view full answer...
Yes the Electric Jack w/ Footplate # EJ-3520-WBX that you referenced will fit the jack mounting flange of your 2018 Jayco 28 BHBE and would be a great option.
I attached a review video for this for you to check out as well. view full answer...
Yes, the Curt Echo, part # C51180, works on your 2019 Entegra Emblem motorhome since you have a 7-way. It works on any vehicle that has a 7-way with a functional 12 volt pin.
The only issue you may run into is distance. The Echo reportedly has a range of up to 50 feet but that's unobstructed. The good thing about this is even if you lose connection with the Echo after it's set up it'll still activate your trailer brakes. You just won't be able to use the manual override or make any... view full answer...
It sounds like your 2016 Jayco Jayflight 24fbs has an underslung coupler and that's why you're running into issues finding one that fits. The most versatile coupler lock that is guaranteed to work with your Jayco Jayflight is the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers item # FA86-0015-316. This has the tube key lock cylinder for more security. view full answer...
The answer to your question - technically - is yes, for your trailer with a 770 lb tongue weight, you can use the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW # EQ37140ET. However, it is definitely not recommended, and the reason for that is the spring bars will be rated so much higher than your tongue weight that there won't be the proper amount of force on them, which will result in you having a very stiff ride and trailer that will bounce.... view full answer...
We can get you set up with a weight distribution hitch for your 2006 Jayco Jay Flight 31BHDS, though the SwayPro # BXW2000 isn't rated correctly for that trailer. That hitch is for tongue weights between 1,500 lbs and 2,000 lbs, andthe '06 Jay Flight 31BHDS has a 9,000 lb GVWR, so your tongue weight is going to be in the 1,100 lb - 1,200 lb range. From my research it looks as if the trailer also has an underslung coupler, so what you need is the following:
- Blue Ox SwayPro Weight Distribution... view full answer...