When it comes to choosing the correct size converter charger you'll simply need 10% of the total amp hour rating of your battery bank up to the max amperage that the battery can handle, which is typically listed on the battery. In your case your battery bank is 270 amp hours (if wired in parallel) so you would need a minimum 27 amp charger.
The Progressive Dynamics # PD9245C has a 45 amp rating so it would be sufficient. If you wanted to go with a higher amperage charger to recharge your... view full answer...
It sounds like you are just trying to replace an old oval clearance and if that's the case we have some great options. That said, the numbers on the lens of the light (SAE ###) are not part numbers and cannot be used to cross-reference. However, since you sent a photo I can pretty easily see that the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-52 will be the correct replacement.
I have attached a full list of options below. view full answer...
The Swagman Chinook Bike Rack for 2 Bikes # S64683 can indeed be used on your 33 Foot Class A Motorhome. Though most motorhomes will have a 2" hitch, this can also fit the smaller 1-1/4" hitch as well. The locking anti-rattle hitch pin will also keep the rack securely in place once installed. view full answer...
You should be able to use the etrailer Hitch Extender # e88YR with the Hollywood Racks RV Rider Bike Rack # HLY64FR. You will need to ensure the receiver on your class A RV motorhome is rated for at least twice as much weight as bike rack(64lbs) and your bikes. This is due to the extension reducing capacity by 50%. So with bikes weighing 64lbs each that would require a receiver rated for at least 384lbs of tongue weight. For 80lb bikes which is the maximum the bike rack can carry you need... view full answer...
I recommend using the Adco Ultra Tyre Gard RV Tire Covers # 290-3970 to protect the 245/75-22.5" spare tire on your motorhome. This is designed to be used as a storage cover but the strap at the bottom of the cover will ensure it stays in place on your spare tire while you drive. I cannot find anyone who manufactures a spare tire designed cover for anything over a 35" tire. view full answer...
I spoke to my contact at LaSalle Bristol and he confirmed the Gustafson RV Puck Light - 4-1/2" - Recessed - 4 Watt # 277-000344 will be a replacement for your 2013 Itasca Navion iQ. view full answer...
We do have a direct replacement for your Coleman Mach 8 air conditioner that comes with an adapter that plugs right into your existing wiring. Yours is a 15,000 Btu unit and you can replace it with a Furrion AC, in either White or Black:
- White: Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup # FR42PV
- Black: Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup # FR32PV
The only thing this doesn't come with is a heat strip, so if you'd like that as well... view full answer...
The Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V Item # JWM60A is the closest replacement for the Jensen AWM970. This stereo system plays audio from radio signals, CDs, DVDs, and devices connected through Bluetooth, a USB input, or an auxiliary cord. Unfortunately we do not carry any units that can play Blu-Ray. You would need to purchase a separate Blu-Ray player and connect it to your tv. view full answer...
Yes, the Wheel Masters 2-Hose Inflation Kit # WM8009 is absolutely compatible with your tire pressure monitoring system (TPMS). This kit will work with inner tires on 16", 16-1/2" and 19-1/2" dual wheels, has a 1-year warranty and is made in the U.S.A. view full answer...
While we do not have access to a list of what roller may be on your Itasca Meridian V, the Global Link Replacement J38 Roller for RV Slide Out # 295-000027 may work for you if your slide out is a Lippert Components In-Wall system.
If you are unsure the other thing you can do is take some measurements to see if your existing roller matches up to the dimensions in the accompanying photo. view full answer...
For your 2012 Navion on the 2011 Mercedes-Benz Sprinter 3500 chassis you will need the WeatherTech Front Auto Floor Mat in Black # WT4410631 or Gray # WT4610631. view full answer...
We have no way of knowing what door latch is on any motorhome, so we can't tell you if there is a direct fit; the only option we have for a motorhome entry door latch is the Bauer Products Motorhome Door Lock # BA64FR.
The # BA64FR is a replacement for a Bauer BP-12RVLP or Trimark 060-0650 standard entry door latch, or any door that is 1-1/4" to 1-1/2" thick with a latch cut out that measures 5-1/4" wide x 4-1/2" tall. view full answer...
We do not have any aluminum spare tire carriers so unfortunately nothing that can be welded to your aluminum trailer. The best option is to use a bolt on option that is either galvanized like # CE27310G or is zinc coated like # DL22120 or # FSTC1000301 to avoid galvanic corrosion from the dissimilar metals. view full answer...
I was able to look up part number 094707-04-700 and find the correct replacement control unit for the Kwikee steps in your motorhome.
The correct part is the Replacement Control Unit for Kwikee Electric RV Steps # LC379146. view full answer...
If you want to tow a trailer or use a tow dolly with your 2006 Itasca Meridian Motorhome, you will need a brake controller. My brake controller recommendation is the Redarc you inquired about. It will consist of the following items:
Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional, part # RED44FR
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, part # 3027-P
This brake controller comes with a custom wiring harness. It is a proportional... view full answer...
I checked with Timbren and for your 2014 Itasca Sunstar 31ke the correct fitting kit is the part # TFFF53B based on the chassis and there aren't any other options that fit. view full answer...
To obtain SnapPad Jack Pads that are a fit for your 2014 Itasca Meridian motorhome you will need to measure the size of your existing jack pads. They will probably be 10" is diameter. Measure all pads as sometimes the front pads and rear pads will be a different size. Next, determine the shape of the pads. They could be round, square or octagon. Finally, let us know if the existing pads are flat or if they have a lip around the edges. With this information we can offer you a confirmed... view full answer...
We have a compatible replacement for the cutout hole of your Jensen VR209TP but you would lose the camera function you currently have. The Furrion RV Stereo - Double DIN - HDMI, AUX/USB, Bluetooth - 3 Zone - 12V # DV1230BL has similar dimensions and features 1 USB, 2 RCA inputs, 1 RCA output, 1 headphone, 1 auxiliary, 2 HDMI, and 1 subwoofer terminal to allow you to link pretty much any device you want. The Bluetooth capability provides hands-free calling from your smartphone and this system... view full answer...
Go To Results