SnapPad Jack Pads for Itasca Meridian Motorhome

Question

Question:

asked by: Terence S

0

Expert Reply:

To obtain SnapPad Jack Pads that are a fit for your 2014 Itasca Meridian motorhome you will need to measure the size of your existing jack pads. They will probably be 10" is diameter. Measure all pads as sometimes the front pads and rear pads will be a different size. Next, determine the shape of the pads. They could be round, square or octagon. Finally, let us know if the existing pads are flat or if they have a lip around the edges. With this information we can offer you a confirmed fit.

For example, many Itasca Meridians will use the SnapPad # SP64FR4 kit which includes four 10" round jack pad feet. The one time installation is a "Snap" and I have included an installation video. These heavy duty pads are made from recycled tires and will prevent your old metal feet from marring your driveway. Best of all: no more crawling on your knees to put boards under your jack feet!

expert reply by: Les D

0

Answer 1

On the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA you need to verify that the converter/charger is set to the appropriate battery type that it is charging. It is common for the converter to get warm and the fan…

view full answer...

Answer 2

I went ahead and reached out to my tech at Progressive Dynamics with your question. The main difference between the two converters is that the #PD9180ALV is for lithium-specific batteries while the #PD9180A is only for lead acid/AGM batteries.…

view full answer...

Answer 3

So I'll start by saying that the fuses on your #PD9180A (lead acid) or #PD9180ALV (lithium) converter would not be affected in this case since they're designed to protect against reverse polarity; they won't blow if there is a short on…

view full answer...

Answer 4

You are correct. The SnapPad Prime part #SP84FR3 that you referenced does fit 10 inch round jack feet as I confirmed this with SnapPad. They also stated that this most commonly fits the Monaco brand RVs.

view full answer...

Answer 5

The difference between the two models that you were researching is that the #PD9160A is designed for use with lead acid batteries and the #PD9160ALV is designed for use with lithium batteries. Choosing the incorrect battery profile can lead to issues…

view full answer...

Answer 6

Hey Dave, for a 60 amp charger the 6-gauge wire that you have currently is not going to cut it. You will want to use 4-gauge copper wire for your 15' run when using the Progressive Dynamics PD9200 Series Battery Converter Charger #PD9260C. For a…

view full answer...

Answer 7

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

view full answer...

Answer 8

Yes, the Progressive Dynamics part #PD9260C will work great as a replacement for the Magnetek 900 series model 950 that you have currently.

view full answer...

SnapPad Jack Pads for Itasca Meridian Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching